വർക്ക്പ്രോ W159020AE

WORKPRO Cordless Grass Shear & Shrubbery Trimmer User Manual

Model: W159020AE

1. ആമുഖം

Thank you for choosing the WORKPRO Cordless Grass Shear & Shrubbery Trimmer. This 2-in-1 tool is designed for efficient and precise trimming of grass and shrubs, offering cordless convenience and ease of use. Please read this manual thoroughly before operation to ensure safe and optimal performance.

WORKPRO Cordless Grass Shear and Shrubbery Trimmer with both attachments and charging cable

Figure 1: WORKPRO 2-in-1 Cordless Grass Shear & Shrubbery Trimmer (Green model)

2. ഉൽപ്പന്ന സവിശേഷതകൾ

Close-up of the WORKPRO trimmer's upgraded power motor and long-lasting battery

Figure 2: Upgraded Power Motor and Long-Lasting Battery

Hand holding the WORKPRO trimmer demonstrating the ergonomic safety lock

Figure 3: Ergonomic Safety Lock for Easy Control

3. സജ്ജീകരണം

3.1. അൺപാക്ക് ചെയ്യലും പരിശോധനയും

Carefully remove all components from the packaging. Inspect the trimmer and its accessories for any signs of damage. If any parts are damaged or missing, do not use the product and contact customer support.

3.2 ബാറ്ററി ചാർജ് ചെയ്യുന്നു

Before first use, fully charge the trimmer's battery. Connect the provided Type-C USB cable to the charging socket on the trimmer and plug the other end into a compatible USB power source (e.g., 5V/2A phone charger, laptop, power bank). The Charger LED Indicator will show charging status. Charging typically takes 2-3 hours.

Attention: For safety, it is not supposed to be used while charging.

WORKPRO trimmer being charged via USB-C cable from various power sources

Figure 4: USB-C Charging Options

3.3. ബ്ലേഡുകൾ ഘടിപ്പിക്കൽ/വേർപെടുത്തൽ

The trimmer comes with two interchangeable blades: a grass shear blade and a shrub blade. To attach a blade:

  1. Ensure the trimmer is turned OFF and the safety lock is engaged.
  2. Align the desired blade attachment with the main unit's connection point.
  3. Press the blade release button (if a blade is already attached) and gently push the new blade into place until it clicks securely.
  4. To detach, press the blade release button and pull the blade away from the unit.

Always use the provided protective covers when storing blades or when the trimmer is not in use.

Diagram showing the components of the WORKPRO trimmer including blades, charging port, and controls

Figure 5: Trimmer Components and Blade Attachment Points

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1. പൊതു പ്രവർത്തനം

To operate the trimmer, first slide the Safety Lock-off Button forward. While holding the safety button, press the ON/OFF Switch (trigger) to start the blades. Release the ON/OFF Switch to stop the blades. Always ensure a firm grip on the TPR Anti-Slip Handle during operation.

4.2. ഗ്രാസ് ഷിയർ ബ്ലേഡ് ഉപയോഗിക്കുന്നത്

Attach the wider grass shear blade. This blade is ideal for trimming lawn edges, around flower beds, or in areas where a lawnmower cannot reach. Hold the trimmer with the blade parallel to the ground and move it steadily along the desired cutting line.

WORKPRO trimmer with grass shear blade in use, showing maximum cutting width

Figure 6: Grass Shear Blade in Action (Max Cutting Width: 2.95 inches / 75mm)

4.3. Using the Shrub Blade

Attach the longer shrub blade. This blade is designed for shaping and trimming small shrubs, hedges, and ornamental plants. Hold the trimmer firmly and guide the blade along the contours of the shrub. Avoid cutting branches thicker than 7.8mm to prevent damage to the blade or motor.

WORKPRO trimmer with shrub blade in use, showing maximum cutting length and thickness

Figure 7: Shrub Blade in Action (Max Cutting Length: 4.65 inches / 118mm, Max Cutting Thickness: 0.31 inches / 7.8mm)

5. പരിപാലനം

പതിവ് അറ്റകുറ്റപ്പണികൾ നിങ്ങളുടെ ട്രിമ്മറിന്റെ ദീർഘായുസ്സും മികച്ച പ്രകടനവും ഉറപ്പാക്കുന്നു.

6 സുരക്ഷാ വിവരങ്ങൾ

പരിക്കുകളോ കേടുപാടുകളോ തടയാൻ എല്ലായ്പ്പോഴും ഈ സുരക്ഷാ മാർഗ്ഗനിർദ്ദേശങ്ങൾ പാലിക്കുക:

7. പ്രശ്‌നപരിഹാരം

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ട്രിമ്മർ ആരംഭിക്കുന്നില്ലബാറ്ററി കുറവാണ് അല്ലെങ്കിൽ തീർന്നു.
സുരക്ഷാ ലോക്ക് വേർപെടുത്തിയിട്ടില്ല.
Blade not properly attached.
ബാറ്ററി ചാർജ് ചെയ്യുക.
Slide the safety lock-off button forward.
Re-attach the blade securely until it clicks.
ബ്ലേഡുകൾ ഫലപ്രദമായി മുറിക്കുന്നില്ലബ്ലേഡുകൾ മങ്ങിയതോ വൃത്തികെട്ടതോ ആണ്.
കട്ടിംഗ് മെറ്റീരിയൽ വളരെ കട്ടിയുള്ളതാണ്.
Clean and lubricate blades. Consider replacing dull blades.
Do not attempt to cut branches thicker than 7.8mm.
ചെറിയ ബാറ്ററി ലൈഫ്ബാറ്ററി പൂർണ്ണമായി ചാർജ് ചെയ്തിട്ടില്ല.
കാലക്രമേണ ബാറ്ററിയുടെ നാശത്തിന് കാരണമാകുന്നു.
ഉപയോഗിക്കുന്നതിന് മുമ്പ് ഫുൾ ചാർജ് ഉറപ്പാക്കുക.
Recharge battery every 3-6 months if not used regularly. Consider battery replacement if severe degradation occurs.

8 സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർസ്പെസിഫിക്കേഷൻ
ബ്രാൻഡ്വർക്ക്പ്രോ
മോഡൽ നമ്പർW159020AE
പവർ ഉറവിടംബാറ്ററി പവർ (ലിഥിയം-അയൺ)
ബാറ്ററി ശേഷി2000mAh
ചാർജിംഗ് തരംUSB-C (5V/2A)
നോ-ലോഡ് സ്പീഡ്1100rpm
ഇനത്തിൻ്റെ ഭാരം1.85 പൗണ്ട് (0.84 കി.ഗ്രാം)
ഉൽപ്പന്ന അളവുകൾ10.24"L x 2.36"W x 4.13"H (26cm x 6cm x 10.5cm)
ബ്ലേഡ് മെറ്റീരിയൽഉയർന്ന കാർബൺ സ്റ്റീൽ
കുറ്റിച്ചെടിയുടെ ബ്ലേഡിന്റെ നീളം4.65 ഇഞ്ച് (118 മിമി)
Grass Shear Width2.95 ഇഞ്ച് (75 മിമി)
Max Cutting Thickness (Shrub)0.31 ഇഞ്ച് (7.8 മിമി)
യു.പി.സി820909687368

9. വാറൻ്റിയും പിന്തുണയും

For warranty information, technical support, or replacement parts, please refer to the official WORKPRO website or contact their customer service directly. You may also find additional resources and a downloadable PDF user guide on the product's Amazon listing page under the "Documents" section.

ഔദ്യോഗിക ഉപയോക്തൃ ഗൈഡ് (PDF): https://manuals.plus/m/c840d8bbeb2f7664f13b29279e4f42a3ab4231b35b9facfabc38e97f500d0251

അനുബന്ധ രേഖകൾ - W159020AE

പ്രീview WORKPRO 7.2V കോർഡ്‌ലെസ് ഗ്രാസ് ഷിയർ & ഷ്രബറി ട്രിമ്മർ പ്രവർത്തന നിർദ്ദേശങ്ങൾ
WORKPRO 7.2V കോർഡ്‌ലെസ് ഗ്രാസ് ഷിയർ & ഷ്രബറി ട്രിമ്മറിനായുള്ള യഥാർത്ഥ പ്രവർത്തന നിർദ്ദേശങ്ങൾ, സുരക്ഷാ മുൻകരുതലുകൾ, ചാർജിംഗ്, പ്രവർത്തനം, വൃത്തിയാക്കൽ, അറ്റകുറ്റപ്പണികൾ, നീക്കംചെയ്യൽ എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview വർക്ക്പ്രോ കോർഡ്‌ലെസ് ഗ്രാസ് ഷിയർ & ഷ്രബറി ട്രിമ്മർ: പ്രവർത്തന നിർദ്ദേശങ്ങളും സുരക്ഷാ ഗൈഡും
WORKPRO കോർഡ്‌ലെസ് ഗ്രാസ് ഷിയർ & ഷ്രബറി ട്രിമ്മറിന്റെ (മോഡലുകൾ W159020A, W159023A, W159026A) വിശദമായ പ്രവർത്തന നിർദ്ദേശങ്ങൾ, സുരക്ഷാ മുന്നറിയിപ്പുകൾ, സാങ്കേതിക സവിശേഷതകൾ, പരിപാലന മാർഗ്ഗനിർദ്ദേശങ്ങൾ എന്നിവ ഇവിടെയുണ്ട്. നിങ്ങളുടെ പൂന്തോട്ട ഉപകരണം എങ്ങനെ സുരക്ഷിതമായി ഉപയോഗിക്കാമെന്നും ചാർജ് ചെയ്യാമെന്നും പരിപാലിക്കാമെന്നും മനസ്സിലാക്കുക.
പ്രീview വർക്ക്പ്രോ 7.2V കോർഡ്‌ലെസ്സ് ഗ്രാസ് ഷിയർ & ഷ്രബറി ട്രിമ്മർ യൂസർ മാനുവൽ
WORKPRO W159031A, W159037A 7.2V കോർഡ്‌ലെസ് ഗ്രാസ് ഷിയർ & ഷ്രബറി ട്രിമ്മർ എന്നിവയ്‌ക്കായുള്ള സമഗ്രമായ പ്രവർത്തന നിർദ്ദേശങ്ങളും സുരക്ഷാ ഗൈഡും. ശരിയായ ഉപയോഗം, പരിപാലനം, ചാർജിംഗ്, സുരക്ഷാ മുൻകരുതലുകൾ എന്നിവയെക്കുറിച്ച് അറിയുക.
പ്രീview WORKPRO 7.2V കോർഡ്‌ലെസ്സ് ഗ്രാസ് ഷിയർ & ഷ്രബറി ട്രിമ്മർ PLYL-98 യൂസർ മാനുവൽ
WORKPRO 7.2V കോർഡ്‌ലെസ് ഗ്രാസ് ഷിയർ & ഷ്രബറി ട്രിമ്മറിന്റെ (മോഡൽ PLYL-98) ഔദ്യോഗിക പ്രവർത്തന നിർദ്ദേശങ്ങളും സുരക്ഷാ ഗൈഡും. സവിശേഷതകൾ, പരിപാലനം, സുരക്ഷിതമായ ഉപയോഗം എന്നിവയെക്കുറിച്ച് അറിയുക.
പ്രീview WORKPRO 12V കോർഡ്‌ലെസ് ഗ്രാസ് ഷിയർ & ഷ്രബറി ട്രിമ്മർ - യഥാർത്ഥ പ്രവർത്തന നിർദ്ദേശങ്ങൾ
WORKPRO W159039A 12V കോർഡ്‌ലെസ് ഗ്രാസ് ഷിയർ & ഷ്രബറി ട്രിമ്മറിനായുള്ള ഔദ്യോഗിക പ്രവർത്തന നിർദ്ദേശങ്ങൾ, സുരക്ഷ, ഉപയോഗം, പരിപാലനം, നീക്കംചെയ്യൽ എന്നിവ ഉൾക്കൊള്ളുന്നു. സാങ്കേതിക സവിശേഷതകളും ചാർജർ ഇൻഡിക്കേറ്റർ ഗൈഡും ഉൾപ്പെടുന്നു.
പ്രീview WORKPRO 7.2V കോർഡ്‌ലെസ് ഗ്രാസ് ഷിയർ & ഷ്രബറി ട്രിമ്മർ ഓപ്പറേറ്റിംഗ് നിർദ്ദേശ മാനുവൽ
WORKPRO 7.2V കോർഡ്‌ലെസ് ഗ്രാസ് ഷിയർ & ഷ്രബറി ട്രിമ്മറിനായുള്ള ഔദ്യോഗിക പ്രവർത്തന നിർദ്ദേശങ്ങൾ (മോഡലുകൾ W159029A, W159032A, W159035A). കാര്യക്ഷമമായ പൂന്തോട്ട പരിപാലനത്തിനുള്ള സുരക്ഷ, ശരിയായ ഉപയോഗം, പരിപാലനം, സാങ്കേതിക സവിശേഷതകൾ എന്നിവ ഈ ഗൈഡിൽ ഉൾപ്പെടുന്നു.