Fosmon Anti Theft Bike Alarm User Manual

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Fosmon Anti Theft Bike Alarm is designed to provide robust security for your bicycle, e-bike, scooter, motorcycle, cart, or trailer. It features a loud 113dB siren, a sensitive vibration motion sensor, and a remote control for convenient operation. The system is waterproof and offers multiple adjustable settings to suit various environments and security needs.

This image displays the two Fosmon bike alarm units and their corresponding remote controls included in the 2-PACK.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Before installation, ensure the alarm unit has fresh batteries installed (2 AAA batteries, included). The alarm offers two primary installation methods:

ഇൻസ്റ്റലേഷൻ രീതികൾ

This diagram illustrates the two methods for mounting the alarm: using zip ties for secure attachment to a frame, or using double-sided tape for flat surfaces.

• സിപ്പ് ടൈസ് ഇൻസ്റ്റാളേഷൻ: Thread the cable ties through the brackets on the back of the alarm. Run them through one or both of the provided channels. Wrap the zip ties around the desired installation area (e.g., bike frame) and pull them tight to ensure a secure fit.
• Double-Sided Tape Installation: Thoroughly clean and dry the desired surface area. Apply the provided adhesive tape to the back of the alarm and firmly press it onto the desired surface.

റിമോട്ട് കൺട്രോൾ ജോടിയാക്കുന്നു

An alarm unit can be paired with up to 8 remote controls. To pair a remote:

1. അലാറം നിരായുധനാണെന്ന് ഉറപ്പാക്കുക.
2. Press and hold the 'Disarm' button on the remote for approximately 3 seconds until the alarm beeps once.
3. Within 5 seconds, press the 'Arm' button on the remote. The alarm will beep twice to confirm successful pairing.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

ആയുധമാക്കലും നിരായുധീകരണവും

• ആയുധമാക്കാൻ: അമർത്തുക ഭുജം ബട്ടൺ (closed padlock icon) on the remote. The alarm will beep once to confirm it is armed.
• നിരായുധീകരിക്കാൻ: അമർത്തുക നിരായുധമാക്കുക ബട്ടൺ (open padlock icon) on the remote. The alarm will beep twice to confirm it is disarmed.

സെൻസിറ്റിവിറ്റി ലെവലുകൾ ക്രമീകരിക്കുന്നു

The alarm features 7 adjustable sensitivity levels, from lowest (triggered by strong impact) to highest (triggered by gentle touch). The default setting is level 4.

This image visually represents the 7 adjustable sensitivity levels, indicating how the alarm can be triggered from a gentle touch to a strong push or beat.

1. While the alarm is disarmed, press the മിന്നൽപ്പിണർ റിമോട്ടിലെ ബട്ടൺ.
2. The alarm will beep to indicate the current sensitivity level (e.g., 4 beeps for level 4).
3. അമർത്തുന്നത് തുടരുക മിന്നൽപ്പിണർ button to cycle through the levels. Each press will increase the sensitivity by one level, with 7 being the highest. After level 7, it cycles back to level 1.
4. Stop pressing when you reach your desired sensitivity level. The alarm will automatically save the setting after a few seconds of inactivity.

വോളിയം ലെവലുകൾ ക്രമീകരിക്കുന്നു

The alarm has 3 volume levels. The default setting is the loudest (level 3).

This image highlights the alarm's powerful 113dB siren, designed to effectively deter potential thieves within seconds.

1. While the alarm is disarmed, press the ബെൽ റിമോട്ടിലെ ബട്ടൺ.
2. The alarm will beep to indicate the current volume level (e.g., 3 beeps for level 3).
3. അമർത്തുന്നത് തുടരുക ബെൽ button to cycle through the levels. Each press will decrease the volume by one level, with 1 being the quietest. After level 1, it cycles back to level 3.
4. Stop pressing when you reach your desired volume level. The alarm will automatically save the setting after a few seconds of inactivity.

SOS പ്രവർത്തനം

The SOS function detects if the vehicle is tilted more than 45° from its original position (e.g., after an accident) and emits a continuous beeping sound to signal for help. This function is off by default.

This image explains the SOS function, which activates if the device tilts more than 45 degrees from its initial position, and provides steps to enable or disable it.

• To Turn On SOS: അമർത്തിപ്പിടിക്കുക നിരായുധമാക്കുക button for about 6 seconds. The LED will turn off and then back on. The alarm will beep 1 time, followed by 5 beeps to indicate SOS is on.
• To Turn Off SOS: അമർത്തിപ്പിടിക്കുക നിരായുധമാക്കുക button for 6 seconds. The LED will turn off and then back on. The alarm will beep 2 times to indicate SOS is off.

Bike Finder Function

Use the bike finder function to easily locate your vehicle in a parking lot or crowded area. The remote control has a range of up to 230ft (70m).

This image demonstrates the wireless bike tracker function, allowing users to easily locate their bike from a distance using the remote control.

• സജീവമാക്കുന്നതിന്: അമർത്തുക ബെൽ button on the remote while the alarm is armed or disarmed. The alarm will emit a series of loud beeps, helping you pinpoint its location.

മെയിൻ്റനൻസ്

The Fosmon Anti Theft Bike Alarm is designed for durability and minimal maintenance.

വെള്ളവും പൊടിയും പ്രതിരോധം

This image highlights the alarm's IP65 rating, indicating its resistance to dust and water, making it suitable for various outdoor conditions.

• The alarm unit has an IP65 rating, meaning it is protected from total dust ingress and low-pressure water jets from any direction.
• While it is water-resistant, avoid submerging the device in water for extended periods.
• പരസ്യം ഉപയോഗിച്ച് യൂണിറ്റ് വൃത്തിയാക്കുകamp ആവശ്യാനുസരണം തുണി ഉപയോഗിക്കുക. കഠിനമായ രാസവസ്തുക്കളോ ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ഉപയോഗിക്കരുത്.

ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

The alarm unit requires 2 AAA batteries. The remote control uses a CR2032 button cell battery. Replace batteries when the alarm's sound becomes weak or the remote's LED indicator dims.

• അലാറം യൂണിറ്റ്: Open the battery compartment on the back of the alarm unit, remove old batteries, and insert new AAA batteries, observing polarity.
• റിമോട്ട് കൺട്രോൾ: റിമോട്ട് കൺട്രോൾ ശ്രദ്ധാപൂർവ്വം തുറക്കുക casing, replace the CR2032 battery, observing polarity, and close the casinഗ്രാം സുരക്ഷിതമായി.

ട്രബിൾഷൂട്ടിംഗ്

• Alarm is not loud enough: Check the volume setting (refer to 'Adjusting Volume Levels' section). Ensure batteries are not low.
• Alarm is too sensitive/not sensitive enough: Adjust the sensitivity level (refer to 'Adjusting Sensitivity Levels' section).
• റിമോട്ട് കൺട്രോൾ പ്രവർത്തിക്കുന്നില്ല: Ensure the remote's battery is not depleted. Re-pair the remote with the alarm unit (refer to 'Pairing the Remote Control' section). Ensure you are within the remote's operating range (up to 230ft/70m).
• Alarm does not respond: Check the alarm unit's batteries. If the issue persists, try resetting the alarm by removing and reinserting the batteries.

സ്പെസിഫിക്കേഷനുകൾ

വിശാലമായ ആപ്ലിക്കേഷനുകൾ

The Fosmon Anti Theft Bike Alarm is versatile and can be used for various applications, including bicycles, motorcycles, trailers, and scooters.

വാറൻ്റിയും പിന്തുണയും

This Fosmon product comes with a limited lifetime warranty. For more detailed information regarding warranty terms and conditions, please refer to the official Fosmon webസൈറ്റ്.

For technical support, troubleshooting assistance, or any product-related inquiries, please visit the Fosmon support page or contact their customer service directly. Contact information can typically be found on the Fosmon webസൈറ്റ്.