ഉൽപ്പന്നം കഴിഞ്ഞുview
These gas injectors are designed for use with cookers, specifically compatible with Highone, Proline, and Valberg appliances. They facilitate the proper flow of butane and propane gas for efficient cooking.
Compatible appliance models include: Cg504cmwvet, Pgc5050w-f, and Valcg504cmnvt v2.
Image: A set of five brass-colored gas injectors. Each injector features a hexagonal body for wrench grip, a threaded base for secure installation, and a small, precisely drilled orifice at the top for gas dispersion. The top surface of some injectors shows engraved numbers, likely indicating their size or flow rate.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Installation of gas injectors should only be performed by a qualified technician or a competent person, following local gas regulations and safety standards. Incorrect installation can lead to gas leaks, fire, or explosion.
- സുരക്ഷ ആദ്യം: Ensure the gas supply to the cooker is completely shut off before beginning any work. Disconnect the cooker from the electrical supply if applicable.
- Access Injectors: Depending on your cooker model, you may need to remove burner caps, grates, and possibly the hob top to access the existing injectors. Refer to your cooker's specific service manual for detailed disassembly instructions.
- Remove Old Injectors: Carefully unscrew the old injectors using an appropriate wrench. Be gentle to avoid damaging the gas manifold threads.
- Install New Injectors: Screw the new butane-propane injectors into place. Ensure they are tightened securely but do not overtighten, as this can strip the threads. Each burner typically requires a specific size injector; ensure you are installing the correct size for each burner as per your cooker's specifications.
- വീണ്ടും കൂട്ടിച്ചേർക്കുക: Reassemble the cooker components in reverse order of disassembly.
- ചോർച്ച പരിശോധന: After installation, reconnect the gas supply and perform a leak test using a suitable leak detection spray or soapy water solution on all connections. Bubbles indicate a leak. If a leak is detected, immediately shut off the gas supply and re-tighten the connections or seek professional assistance.
- ടെസ്റ്റ് പ്രവർത്തനം: Once no leaks are detected, turn on the gas supply and test each burner to ensure proper ignition and flame appearance.
പ്രവർത്തന പരിഗണനകൾ
These injectors are specifically designed for butane and propane gas. Using them with natural gas or other fuel types can be dangerous and may damage your appliance. Always ensure your cooker is set up for the correct gas type before operation.
Properly installed injectors ensure optimal flame characteristics, which include:
- A stable, blue flame with a well-defined inner cone.
- No yellow tips or excessive lifting of the flame from the burner.
- No strong gas odor during operation (a slight odor upon ignition is normal).
മെയിൻ്റനൻസ്
Gas injectors generally require minimal maintenance once installed correctly. However, periodic checks are recommended:
- വിഷ്വൽ പരിശോധന: Periodically inspect the injectors and burner components for any signs of corrosion, blockage, or damage.
- വൃത്തിയാക്കൽ: If the small orifice of an injector becomes partially blocked (which can manifest as an uneven or weak flame), it may need careful cleaning. Use a fine wire or needle specifically designed for cleaning gas orifices. Do not enlarge the orifice, as this will alter the gas flow and can be dangerous.
- പ്രൊഫഷണൽ പരിശോധന: It is advisable to have your gas appliance serviced by a qualified professional at least once a year to ensure all components, including injectors, are functioning safely and efficiently.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Weak or uneven flame | Partially blocked injector orifice. | Carefully clean the injector orifice with a fine wire. Ensure gas supply is off before cleaning. |
| Yellow or sooty flame | Incorrect gas type (e.g., natural gas with butane/propane injectors) or insufficient air mixture. | Verify the cooker is configured for butane/propane. Check air shutter adjustments if available on your cooker model. Consult a professional. |
| വാതക ഗന്ധം | Gas leak from connections. | Immediately shut off gas supply. Perform a leak test with soapy water. Tighten connections. If odor persists, evacuate and call emergency services. |
| ബർണർ ജ്വലിക്കുന്നില്ല | No gas flow, blocked injector, or igniter issue. | Check gas supply. Clean injector. If igniter clicks but no flame, consult a professional. |
Always prioritize safety. If you are unsure about any troubleshooting step, or if the problem persists, contact a qualified gas appliance technician.
സ്പെസിഫിക്കേഷനുകൾ
- ബ്രാൻഡ്: Highone
- മോഡൽ നമ്പർ: 3665392355182
- Compatible Gas Type: Butane-Propane
- മെറ്റീരിയൽ: ലോഹം
- നിറം: Multicolour (referring to the brass material)
- ഉൽപ്പന്ന അളവുകൾ (L x W x H): 21 x 17 x 14 cm (packaging/set dimensions, not individual injector)
- ഇനത്തിൻ്റെ ഭാരം: 10 grams (likely for the set)
- ASIN: B0BSS69D31
- ആദ്യം ലഭ്യമായ തീയതി: 21 ജനുവരി 2023
വാറൻ്റിയും പിന്തുണയും
Information regarding specific warranty terms for these gas injectors is not directly provided in the product details. Please refer to the warranty information provided by the seller (Adepem) or the manufacturer (Highone) at the time of purchase.
For technical support or professional installation, it is recommended to contact a certified gas appliance technician or the customer service department of your cooker's manufacturer.
For general inquiries about this product, you may contact the seller, Adepem, through the Amazon platform.
