എലിടെക് ട്ലോഗ് 10H ഡിജിറ്റൽ താപനിലയും ഈർപ്പം ഡാറ്റ ലോഗർ ഉപയോക്തൃ മാനുവലും

1. ആമുഖം

This manual provides comprehensive instructions for the Elitech Tlog 10H Digital Temperature and Humidity Data Logger. It covers device setup, operation, data retrieval, maintenance, and troubleshooting. Please read this manual thoroughly before using the device to ensure proper functionality and accurate data collection.

ഫ്രണ്ട് view of the Elitech Tlog 10H digital data logger, displaying its screen and control buttons.

2. ഉൽപ്പന്ന സവിശേഷതകൾ

• ബഹുമുഖ ആപ്ലിക്കേഷൻ: The Elitech Tlog 10H is suitable for various applications including life science, food cold chain management, and industrial environments. It complies with FDA 21 CFR Part 11 standards.
• Automatic PDF Report Generation: The device generates a PDF report with embedded data directly, requiring no additional software for access.
• On-Screen Data Display: The device's screen displays current temperature, maximum/minimum values, current date, and recording points. Temperature units (Fahrenheit/Celsius) are switchable.
• Anti-Touch Button Design: Features a design that minimizes accidental button presses during transport, preventing unintended operations.
• ക്രമീകരിക്കാവുന്ന പരാമീറ്ററുകൾ: Users can set temperature units, alarm ranges, and logging intervals. Additional functionalities are available through the Elitechlog software.

3. ഉൽപ്പന്ന ഘടകങ്ങൾ

Detailed diagram of the Elitech Tlog 10H data logger, labeling its internal sensor, LED indicator, Start/Stop button, and USB port.

• ആന്തരിക സെൻസർ: താപനിലയും ഈർപ്പവും അളക്കുന്നു.
• LED സൂചകം: Provides status updates (e.g., recording, alarm).
• ബട്ടൺ: Used for Start, Stop, Status, and Mark functions.
• USB പോർട്ട്: For connecting to a computer to download data and configure settings.

4 സ്പെസിഫിക്കേഷനുകൾ

A diagram showing the dimensions and key specifications of the Elitech Tlog 10H, including its measurement range and accuracy for temperature and humidity.

5. സജ്ജീകരണം

5.1 Initial Device Preparation

1. ബാറ്ററി പരിശോധന: The device comes with a pre-installed Lithium Metal battery. Ensure the battery is securely in place.
2. സംരക്ഷണ ഫിലിം: Remove any protective film from the screen before use.

5.2 Software Installation (Optional for Advanced Settings)

While the device generates automatic PDF reports without software, for advanced configuration and data analysis, download the Elitechlog software from the official Elitech webസൈറ്റ്.

• Visit the Elitech website and navigate to the support or download section.
• Download and install the Elitechlog software compatible with your operating system.

5.3 Parameter Configuration (Using Elitechlog Software)

Connect the Tlog 10H to your computer via the USB port. Open the Elitechlog software to configure the following parameters:

• ലോഗിംഗ് ഇടവേള: Set how frequently the device records data (e.g., every 10 minutes, 30 minutes).
• അലാറം ശ്രേണി: Define upper and lower temperature and humidity limits for alarms.
• താപനില യൂണിറ്റ്: Select between Celsius (°C) and Fahrenheit (°F).
• ആരംഭ മോഡ്: Configure how recording begins (e.g., manual button press, delayed start).
• സ്റ്റോപ്പ് മോഡ്: Configure how recording ends (e.g., manual button press, full memory, specific time).

An infographic detailing the capabilities of the Elitechlog software, including data query, storage, chart comparison, temperature unit switch, settable alarm range, FDA 21 CFR Part 11 compliance, data graph visibility, and data export options.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

6.1 Starting a Recording Session

അമർത്തിപ്പിടിക്കുക ആരംഭിക്കുക button for approximately 3 seconds until the 'REC' indicator appears on the screen, confirming that recording has begun.

6.2 Stopping a Recording Session

അമർത്തിപ്പിടിക്കുക നിർത്തുക button for approximately 3 seconds until the 'END' indicator appears on the screen, confirming that recording has stopped.

6.3 Viewing Data on Screen

ചുരുക്കത്തിൽ അമർത്തുക ആരംഭിക്കുക button to cycle through various display modes, including current temperature, current humidity, maximum/minimum recorded values, and remaining battery life.

6.4 താപനില യൂണിറ്റുകൾ മാറൽ

While the device is not recording, briefly press both the ആരംഭിക്കുക ഒപ്പം നിർത്തുക buttons simultaneously to toggle between Celsius (°C) and Fahrenheit (°F).

7. ഡാറ്റ മാനേജ്മെൻ്റ്

7.1 Automatic PDF Report Generation

After stopping a recording session, connect the Tlog 10H to a computer's USB port. The device will automatically generate a PDF report containing all recorded data. This report can be saved and viewed without installing any special software.

An image illustrating the Elitech Tlog 10H connected via USB to a laptop, highlighting its automatic PDF report generation and plug-and-play functionality.

7.2 Using Elitechlog Software for Advanced Analysis

For more detailed data analysis, chart comparison, and data export options (e.g., PDF, Excel), use the Elitechlog software. Connect the device to your computer and open the software to access these features.

8. പരിപാലനം

8.1 വൃത്തിയാക്കൽ

Wipe the device clean with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.

8.2 ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

The device uses a Lithium Metal battery. If the battery indicator shows low power, replace the battery with a new one of the same type. Refer to the device's battery compartment for specific instructions on replacement.

8.3 സംഭരണം

Store the data logger in a cool, dry place away from direct sunlight and extreme temperatures when not in use.

9. പ്രശ്‌നപരിഹാരം

• Device not starting: Ensure the battery has sufficient charge. Press and hold the START button firmly for 3 seconds.
• No data on screen: Check if the device is in recording mode. If not, start a new recording session.
• Unable to generate PDF report: Ensure the device is properly connected to the USB port of your computer. Verify that the recording session has been stopped.
• കൃത്യമല്ലാത്ത വായനകൾ: Ensure the sensor is not obstructed and the device is placed in an environment suitable for its specified measurement range.

10. ആപ്ലിക്കേഷൻ സാഹചര്യങ്ങൾ

Images depicting various applications for the Elitech Tlog 10H data logger, such as in cold boxes, refrigerated trucks, cold chain containers, and distribution centers.

The Elitech Tlog 10H is designed for monitoring temperature and humidity in various environments, including:

• Cold Boxes
• Refrigerated Trucks
• Cold Chain Containers
• വിതരണ കേന്ദ്രങ്ങൾ
• Laboratories and Life Science applications

11. വാറൻ്റിയും പിന്തുണയും

11.1 വാറൻ്റി വിവരങ്ങൾ

Specific warranty details for the Elitech Tlog 10H are typically provided at the point of purchase or on the official Elitech webസൈറ്റ്. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.

11.2 ഉപഭോക്തൃ പിന്തുണ

For technical assistance, troubleshooting, or further inquiries, please contact Elitech customer support. You can find contact information and additional resources on the official Elitech webസൈറ്റ്: Elitech Store on Amazon