1. ആമുഖം
The AXA Blueline Rear Dynamo Light is a compact and efficient taillight designed for bicycles, perfectly fitting the modern trend towards lighter and slimmer bike aesthetics. Its design ensures suitability for nearly all luggage carriers. Featuring advanced lightguide technology, it provides optimal safety through superior light distribution. Side lighting enhances visibility to crossing traffic, significantly improving rider safety. An integrated steady light function keeps the light on for 4 minutes even when the bicycle is stationary, providing continuous visibility. This light is dynamo operated and includes an integrated reflector.
Figure 1: The AXA Blueline Rear Dynamo Light, showcasing its compact design and integrated reflector.
2 പ്രധാന സവിശേഷതകൾ
- Dynamo Operated: Powers directly from your bicycle's dynamo, eliminating the need for batteries.
- 6V E-bike Battery Compatible: Can also be powered by a 6V E-bike battery for versatile use.
- Integrated Reflector: Enhances passive safety by reflecting light from other sources.
- 50 mm Mounting Distance: Designed for standard 50mm mount spacing on luggage carriers.
- Visible from the Side: Special lightguide technology ensures visibility from the side, increasing safety in traffic.
- Steady Light Function: Provides 4 minutes of light when stationary, maintaining visibility during stops.
3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
3.1 ലൈറ്റ് സ്ഥാപിക്കൽ
The AXA Blueline Rear Dynamo Light is designed for seat mount installation, typically on a bicycle's luggage carrier. It features a standard mounting distance of 50 mm between the two mounting points.
- Identify the mounting points on your bicycle's luggage carrier. These should be two holes spaced 50 mm apart.
- Align the light's mounting holes with those on the carrier.
- Secure the light using appropriate screws and nuts (not included, typically supplied with the carrier or bicycle). Ensure the light is firmly attached and does not wobble.
3.2 Wiring the Dynamo Connection
Connect the light to your bicycle's dynamo system. Ensure proper polarity if specified by your dynamo or E-bike system. The light is compatible with standard bicycle dynamos and 6V E-bike batteries.
- Locate the dynamo output wires, usually one for power and one for ground.
- Connect the power wire from the dynamo to the corresponding input on the Blueline light.
- Connect the ground wire from the dynamo to the ground input on the light.
- Ensure all connections are secure and protected from water and debris.
4. ഓപ്പറേഷൻ
4.1 പ്രകാശം സജീവമാക്കൽ
The AXA Blueline Rear Dynamo Light operates automatically when connected to a functioning dynamo and the bicycle is in motion. As the wheels turn, the dynamo generates electricity, powering the light.
4.2 Steady Light Function
This light features an integrated steady light function. After you stop cycling, the light will remain illuminated for approximately 4 minutes. This ensures continued visibility at intersections or during brief stops, enhancing safety.
5. പരിപാലനം
To ensure the longevity and optimal performance of your AXA Blueline Rear Dynamo Light, follow these simple maintenance guidelines:
- വൃത്തിയാക്കൽ: Regularly wipe the light's lens and housing with a soft, damp cloth to remove dirt and grime. Avoid abrasive cleaners or solvents that could damage the plastic.
- കണക്ഷനുകൾ: Periodically check the electrical connections to the dynamo or E-bike battery to ensure they are secure and free from corrosion.
- മൗണ്ടിംഗ്: Verify that the light remains securely mounted to your bicycle's carrier. Tighten any loose screws as needed.
- പരിശോധന: Inspect the light for any physical damage, such as cracks in the housing or lens, which could compromise its performance or water resistance.
Note: The product is listed as "Not Water Resistant". While it is designed for outdoor use, avoid submerging it in water or exposing it to extreme water pressure.
6. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Light does not turn on when cycling. |
|
|
| വെളിച്ചം മങ്ങുന്നു അല്ലെങ്കിൽ മിന്നിമറയുന്നു. |
|
|
| Steady light function does not work. |
|
|
7 സ്പെസിഫിക്കേഷനുകൾ
| ആട്രിബ്യൂട്ട് | വിശദാംശങ്ങൾ |
|---|---|
| മോഡലിൻ്റെ പേര് | AXA Blueline Rear Dynamo Light |
| മോഡൽ നമ്പർ | 93961495 യുഎസ് |
| ബ്രാൻഡ് | AXA |
| നിറം | കറുപ്പ് |
| മെറ്റീരിയൽ | മൾട്ടി |
| പവർ ഉറവിടം | Dynamo, 6V E-bike Battery Compatible |
| ജല പ്രതിരോധ നില | വാട്ടർ റെസിസ്റ്റൻ്റ് അല്ല |
| മൗണ്ടിംഗ് തരം | സീറ്റ് മൗണ്ട് |
| മൗണ്ടിംഗ് ദൂരം | 50 മി.മീ |
| ക്രമീകരണങ്ങളുടെ എണ്ണം | 1 (On/Off via dynamo) |
| യാന്ത്രിക ഭാഗം സ്ഥാനം | പിൻഭാഗം |
| സംയോജിത സവിശേഷതകൾ | Reflector, Steady Light Function (4 minutes) |
| ഇനത്തിൻ്റെ ഭാരം | Approximately 40g (as per product description) |
8. വാറൻ്റിയും പിന്തുണയും
8.1 ലിമിറ്റഡ് വാറൻ്റി
The AXA Blueline Rear Dynamo Light comes with a പരിമിത വാറൻ്റി. For specific details regarding the terms, conditions, and duration of the warranty, please refer to the warranty card included with your purchase or contact AXA customer service directly. This warranty typically covers manufacturing defects and material flaws under normal use.
8.2 ഉപഭോക്തൃ പിന്തുണ
Should you encounter any issues not covered in the troubleshooting section, or require further assistance, please contact AXA customer support. Have your product model number (93961495US) and purchase information ready when contacting support.
For the most up-to-date contact information, please visit the official AXA webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ ഉൽപ്പന്നത്തിന്റെ പാക്കേജിംഗ് കാണുക.
