ഉൽപ്പന്നം കഴിഞ്ഞുview
This manual provides instructions for the Oraimo replacement HEPA filters, model OAS-FI-SV102, designed for use with the Oraimo OSV-102 Cordless Vacuum Cleaner. These filters are crucial for maintaining the vacuum's suction power and ensuring effective air filtration, capturing fine dust and allergens. The filters are reusable and washable, offering a cost-effective and environmentally friendly solution.
Image: The Oraimo OSV-102 Cordless Vacuum Cleaner shown with its various attachments and a set of four replacement HEPA filters, highlighting the product's components.
The package includes two (2) replacement HEPA filters, ensuring you have a spare for continuous use while one is being cleaned or dried. Regular replacement and cleaning of these filters are essential for optimal vacuum performance and air quality.
പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ
- Always turn off and unplug the Oraimo OSV-102 vacuum cleaner before attempting to install, remove, or clean the filters.
- Use only genuine Oraimo replacement filters (model OAS-FI-SV102) to ensure proper fit and filtration performance.
- Do not operate the vacuum cleaner without the filters properly installed.
- Keep filters away from open flames or excessive heat.
ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ
Follow these steps to replace the HEPA filter in your Oraimo OSV-102 Cordless Vacuum Cleaner:
- പവർ ഓഫ്: Ensure the vacuum cleaner is turned off and disconnected from its charging base or power source.
- Locate Dust Cup: Identify the dust cup assembly on your Oraimo OSV-102 vacuum.
- ഡസ്റ്റ് കപ്പ് നീക്കം ചെയ്യുക: Press the dust cup release button (if applicable) or twist the dust cup counter-clockwise to detach it from the main body of the vacuum.
- ആക്സസ് ഫിൽട്ടർ: Inside the dust cup, locate the existing HEPA filter. It is typically a cylindrical or conical filter element.
- പഴയ ഫിൽറ്റർ നീക്കം ചെയ്യുക: Gently twist or pull the old filter to remove it from its housing. Dispose of the old filter responsibly if it is no longer usable.
- പുതിയ ഫിൽറ്റർ ചേർക്കുക: Take a new Oraimo replacement HEPA filter (OAS-FI-SV102) and insert it into the filter housing. Ensure it is seated firmly and correctly.
- ഡസ്റ്റ് കപ്പ് വീണ്ടും ഘടിപ്പിക്കുക: Align the dust cup with the vacuum's main body and twist it clockwise or push it until it clicks securely into place.
- ഉപയോഗത്തിന് തയ്യാറാണ്: The vacuum cleaner is now ready for use with the new filter installed.
പരിപാലനവും ശുചീകരണവും
To maintain optimal performance, regularly clean your reusable HEPA filters. Follow these steps:
- ഫിൽറ്റർ നീക്കം ചെയ്യുക: Follow steps 1-4 from the Installation Instructions to remove the HEPA filter from the dust cup.
- Tap Out Debris: Gently tap the filter against a trash can to dislodge any loose dust and debris.
- കഴുകുക: Rinse the filter under cold, running water. Continue rinsing until the water runs clear. Do not use hot water or detergents, as this can damage the filter material.
- എയർ ഡ്രൈ: Allow the filter to air dry completely for at least 24 hours before reinstalling it. Ensure it is placed in a well-ventilated area, away from direct sunlight or heat. Do not use a dryer or other heating devices, as this can deform or damage the filter.
- വീണ്ടും ഇൻസ്റ്റാൾ ചെയ്യുക: Once completely dry, reinstall the filter into the dust cup and reattach the dust cup to the vacuum cleaner.
It is recommended to clean the filter every 2-4 weeks, depending on usage, and replace it every 3-6 months for best performance.
ട്രബിൾഷൂട്ടിംഗ്
If you experience issues with your Oraimo OSV-102 vacuum cleaner after filter maintenance, consider the following:
- കുറച്ച സക്ഷൻ:
- Check if the filter is clogged. Clean or replace the filter as per the Maintenance section.
- വീണ്ടും ഇൻസ്റ്റാൾ ചെയ്യുന്നതിന് മുമ്പ് ഫിൽട്ടർ പൂർണ്ണമായും ഉണങ്ങിയെന്ന് ഉറപ്പാക്കുക.amp filter can impede airflow.
- Verify the dust cup is securely attached and there are no blockages in the vacuum's hose or brush head.
- അസാധാരണമായ ഗന്ധം:
- A dirty filter can cause odors. Clean or replace the filter.
- Ensure the filter is thoroughly dried after washing to prevent mildew.
- ഫിൽട്ടർ യോജിക്കുന്നില്ല:
- Confirm you are using the correct replacement filter model (OAS-FI-SV102) for your Oraimo OSV-102 vacuum cleaner.
- Ensure the filter is oriented correctly during installation.
സ്പെസിഫിക്കേഷനുകൾ
| ബ്രാൻഡ് | ഒറൈമോ |
| മോഡൽ നമ്പർ | OAS-FI-SV102 |
| അനുയോജ്യമായ ഉപകരണങ്ങൾ | Oraimo OSV-102 Cordless Vacuum Cleaner, Dyson V11 (as per product information) |
| പുനരുപയോഗം | വീണ്ടും ഉപയോഗിക്കാവുന്നത്, കഴുകാവുന്നത് |
| കഷണങ്ങളുടെ എണ്ണം | 2 |
| ഇനത്തിൻ്റെ ഭാരം | 3.52 ഔൺസ് |
| ഉൽപ്പന്ന അളവുകൾ | 3.15 x 3.54 x 5.51 ഇഞ്ച് |
വാറൻ്റിയും പിന്തുണയും
For any questions regarding the Oraimo replacement HEPA filters, including warranty information or technical support, please contact Oraimo customer service. Refer to the original Oraimo OSV-102 Cordless Vacuum Cleaner manual or the Oraimo official webബന്ധപ്പെടാനുള്ള വിശദാംശങ്ങൾക്കുള്ള സൈറ്റ്.
