1. ഉൽപ്പന്നം കഴിഞ്ഞുview
The XPOtool Pool Pump is designed to significantly improve the water quality of swimming pools and whirlpools. It boasts a powerful circulation capacity of up to 560 liters per minute, equating to 33,600 liters per hour, ensuring continuous water purification. The pump is installed directly before the filter tank, drawing water into the filtration system and returning it clean to the pool, thereby preventing algae growth and germ accumulation. This model features a maximum delivery head of 18 meters and operates quietly.
A key feature of this 1500 W pool pump is its variable speed capability, adjustable in three stages between 600 and 3000 revolutions per minute. This allows for energy-efficient operation at lower speeds, saving electricity, while also providing full power when higher performance is required. The variable speed also enables individual adaptation to different connected devices that may not require high RPM. The pump's motor is equipped with practical overheating protection for enhanced safety.
For optimal pump performance, it is recommended that the entire volume of the swimming pool is circulated twice daily. An operating duration of approximately 8 hours is a good guideline. For example, a 40 m³ pool would require a daily circulation of 80 m³, which translates to a filter system capable of pumping at least 10 m³/h (167 l/min) over an 8-hour period.
2. സുരക്ഷാ നിർദ്ദേശങ്ങൾ
- ഇലക്ട്രിക്കൽ സുരക്ഷ: Always disconnect the pump from the power supply before performing any installation, maintenance, or cleaning. Ensure the power outlet is properly grounded and protected by a Residual Current Device (RCD). Do not operate the pump with damaged cables or plugs.
- Water and Electrical Components: Never immerse the motor or electrical components in water. Ensure all connections are watertight and protected from splashes.
- ഇൻസ്റ്റലേഷൻ: Install the pump on a stable, level surface in a well-ventilated area, protected from direct sunlight and adverse weather conditions. Ensure adequate space around the pump for air circulation and maintenance.
- അമിത ചൂടാക്കൽ സംരക്ഷണം: The pump is equipped with an overheating protection system. If the pump stops unexpectedly, allow it to cool down before attempting to restart. Investigate the cause of overheating (e.g., blocked intake, insufficient water flow).
- രാസ അനുയോജ്യത: This pump is designed for standard pool water. Note: This pump may not be compatible with salt water pool systems. Consult with a professional if you have a salt water pool.
- കുട്ടികളും വളർത്തുമൃഗങ്ങളും: പമ്പ് പ്രവർത്തിപ്പിക്കുമ്പോൾ കുട്ടികളെയും വളർത്തുമൃഗങ്ങളെയും അതിൽ നിന്ന് അകറ്റി നിർത്തുക.
- പ്രൊഫഷണൽ ഇൻസ്റ്റാളേഷൻ: For complex installations or if you are unsure, it is recommended to consult a qualified electrician or pool technician.
3. പാക്കേജ് ഉള്ളടക്കം
പാക്കേജിൽ ഇനിപ്പറയുന്ന ഇനങ്ങൾ ഉണ്ടോ എന്ന് പരിശോധിക്കുക:
- XPOtool Pool Pump Unit (Model 63910)
- ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)
- Necessary connection fittings (may vary, refer to packaging)
4. സജ്ജീകരണം
പമ്പിന്റെ പ്രകടനത്തിനും ദീർഘായുസ്സിനും ശരിയായ ഇൻസ്റ്റാളേഷൻ നിർണായകമാണ്. ഈ ഘട്ടങ്ങൾ ശ്രദ്ധാപൂർവ്വം പാലിക്കുക:
- പ്ലേസ്മെൻ്റ്: Position the pump on a firm, level surface as close to the pool as possible, but ensuring it is protected from direct weather exposure. The pump should be installed below the water level of the pool for optimal self-priming, or as per specific system requirements.
- മൗണ്ടിംഗ്: Secure the pump to prevent vibration and movement during operation. Use appropriate fasteners if mounting to a base.
- പ്ലംബിംഗ് കണക്ഷനുകൾ: Connect the pump's inlet to the pool's skimmer/main drain line and the outlet to the filter system. Ensure all connections are sealed tightly to prevent leaks and air intake. The pump is designed to be mounted immediately before the filter tank. The connections are Ø 65 mm (G 2½") AG.
- ഇലക്ട്രിക്കൽ കണക്ഷൻ: Connect the pump to a dedicated, properly grounded electrical outlet with RCD protection. Ensure the voltage പമ്പിന്റെ ആവശ്യകതകളുമായി പൊരുത്തപ്പെടുന്നു (230V).
- പ്രൈമിംഗ്: Before first use, ensure the pump is properly primed. Fill the pump housing with water through the clear lid until it is full. Replace the lid securely.
ചിത്രം 4.1: പ്രധാനം view of the XPOtool Pool Pump. Shows the black pump unit with its motor, clear lid for the pre-filter basket, and white connection ports.
Figure 4.2: Dimensional drawing of the XPOtool Pool Pump, showing side and front views with measurements in millimeters, including connection sizes.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The XPOtool Pool Pump features a variable speed control for optimized performance and energy efficiency.
- പവർ ഓൺ/ഓഫ്: Connect the pump to the power supply. Use the integrated control panel or external timer (if installed) to turn the pump on or off.
- വേരിയബിൾ സ്പീഡ് അഡ്ജസ്റ്റ്മെന്റ്: The pump offers three speed settings, ranging from 600 to 3000 RPM.
- Low Speed (e.g., 600-1500 RPM): Ideal for continuous filtration, maintaining water quality, and energy saving. This setting is suitable for general circulation and when less power is needed.
- Medium Speed (e.g., 1500-2500 RPM): Suitable for regular daily operation, balancing efficiency and performance.
- High Speed (e.g., 2500-3000 RPM): Use for backwashing the filter, vacuuming the pool, or when rapid water circulation is required. This setting provides the maximum flow rate of 33,600 liters per hour.
- നിരീക്ഷണ പ്രകടനം: Regularly check the pressure gauge on your filter (if applicable) to ensure proper flow. A significant drop in flow or increase in pressure may indicate a clogged filter or pump issue.
Figure 5.1: Performance curve graph for XPOtool pool pumps, showing Head (m) vs. Flow (L/min) at 3450 r/min. The curve for Art. 63910 (HPP1500) indicates its flow characteristics.
6. പരിപാലനം
Regular maintenance ensures the longevity and efficient operation of your XPOtool Pool Pump.
- Pre-Filter Basket Cleaning: The pump is equipped with a pre-filter basket to catch large debris. Regularly inspect and clean this basket.
- പമ്പ് ഓഫാക്കി വൈദ്യുതിയിൽ നിന്ന് വിച്ഛേദിക്കുക.
- Unscrew the clear lid on top of the pump housing.
- Remove the basket and empty any debris. Rinse the basket thoroughly with water.
- Inspect the O-ring on the lid for damage and ensure it is clean.
- Replace the basket and securely screw the lid back on, ensuring a tight seal.
- മോട്ടോർ വെൻ്റിലേഷൻ: Ensure the motor's cooling fins and fan are free from dust and debris to prevent overheating. Do not block the ventilation openings.
- ചോർച്ച പരിശോധന: Periodically check all plumbing connections for leaks. Tighten connections as needed.
- ശീതകാലം: In regions with freezing temperatures, the pump must be properly winterized to prevent damage.
- Drain all water from the pump and plumbing lines.
- പമ്പ് വരണ്ടതും മഞ്ഞ് വീഴാത്തതുമായ സ്ഥലത്ത് സൂക്ഷിക്കുക.
- Consider using a pool winterizing kit or consulting a pool professional.
ചിത്രം 6.1: മുൻഭാഗം view of the pump showing the clear lid of the pre-filter basket, which allows for easy inspection of debris accumulation.
ചിത്രം 6.2: ക്ലോസപ്പ് view of the pump's inlet, showing the internal strainer which is part of the pre-filter system.
7. പ്രശ്നപരിഹാരം
If you encounter issues with your XPOtool Pool Pump, refer to the following common problems and solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| പമ്പ് ആരംഭിക്കുന്നില്ല. | No power, tripped circuit breaker/RCD, motor overheating, faulty wiring. | Check power supply and circuit breaker. Allow motor to cool if overheated. Inspect wiring (by a qualified electrician). |
| Low water flow or no flow. | Clogged pre-filter basket, air leak in suction line, low water level in pool, clogged impeller, undersized plumbing. | Clean pre-filter basket. Check for air leaks and tighten connections. Ensure adequate pool water level. Inspect impeller for blockages. Consult a professional for plumbing assessment. |
| പമ്പ് ശബ്ദായമാനമാണ്. | Air in system, cavitation, worn bearings, debris in impeller. | Bleed air from system. Ensure proper water flow to prevent cavitation. If bearings are worn, professional repair may be needed. Clean impeller. |
| Pump stops after short operation (e.g., 4-5 minutes). | Overheating protection activated, insufficient water supply, electrical issue. | Allow pump to cool down. Check for blockages in suction line or pre-filter. Ensure adequate water flow to the pump. Verify stable electrical supply. If problem persists, contact support. |
| Water leaking from pump. | Loose connections, damaged O-rings/seals, cracked housing. | Tighten all plumbing connections. Inspect and replace damaged O-rings or seals. If housing is cracked, pump replacement may be necessary. |
ഈ പരിഹാരങ്ങൾ പരീക്ഷിച്ചതിനുശേഷവും പ്രശ്നം നിലനിൽക്കുകയാണെങ്കിൽ, ദയവായി ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.
8 സ്പെസിഫിക്കേഷനുകൾ
| ആട്രിബ്യൂട്ട് | മൂല്യം |
|---|---|
| ബ്രാൻഡ് | XPOtool |
| മോഡൽ നമ്പർ | 63910 |
| പവർ (വാട്ട്) | 1500 W |
| വാല്യംtage | 230 വി |
| പരമാവധി. ഫ്ലോ റേറ്റ് | മിനിറ്റിൽ 560 ലിറ്റർ (33,600 ലിറ്റർ/മണിക്കൂർ) |
| പരമാവധി. ഡെലിവറി ഹെഡ് | 18 മീറ്റർ |
| വേരിയബിൾ സ്പീഡ് | 3 സെtages (600 - 3000 RPM) |
| ഉൽപ്പന്ന അളവുകൾ (L x W x H) | 61.6 x 18 x 33.8 സെ.മീ |
| ഇനത്തിൻ്റെ ഭാരം | 14.76 കിലോഗ്രാം |
| മെറ്റീരിയൽ | സ്റ്റീൽ, പ്ലാസ്റ്റിക് |
| നിറം | കറുപ്പ് |
| ഡ്രൈവ് തരം | വയർഡ് |
9. വാറൻ്റിയും പിന്തുണയും
XPOtool products are manufactured to high quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official XPOtool website. In case of technical issues, questions about operation, or warranty claims, please contact the seller or manufacturer directly.
വിൽപ്പനക്കാരൻ: Wiltec Wildanger ടെക്നിക് GmbH
For further assistance, please visit the XPOtool store on Amazon or contact their customer service.
