1. ഉൽപ്പന്നം കഴിഞ്ഞുview
The Lectron Level 2 EV Charger is designed for efficient and reliable charging of J1772 compatible electric vehicles. This portable charger delivers up to 240V and 40 Amps of input power, providing a 9.6 kW charging rate for fast charging at home or on the go. It features a NEMA 14-50 plug for direct connection to a 240V outlet and a 16-foot cable for flexible placement.
- ഫാസ്റ്റ് ചാർജിംഗ്: Up to 240V, 40 Amps, and 9.6 kW charging rate.
- സുരക്ഷാ സാക്ഷ്യപ്പെടുത്തിയത്: ETL, FCC, and Energy Star certified with overvoltagഇ, ഓവർകറൻ്റ്, ഷോർട്ട് സർക്യൂട്ട് സംരക്ഷണം.
- മോടിയുള്ള ഡിസൈൻ: IP65 rated for dust and water resistance.
- പോർട്ടബിൾ: Long 16-foot cable for convenient use in various locations.
- സാർവത്രിക അനുയോജ്യത: Compatible with all J1772 standard EVs.
- LED സൂചകങ്ങൾ: For monitoring charging status and fault alerts.

2 സുരക്ഷാ വിവരങ്ങൾ
Please read all safety instructions carefully before using the Lectron Level 2 EV Charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Ensure the NEMA 14-50 outlet is properly installed and grounded by a qualified electrician.
- കേബിളോ കണക്ടറോ കേടായെങ്കിൽ ചാർജർ ഉപയോഗിക്കരുത്.
- ചാർജർ വെള്ളത്തിലോ മറ്റ് ദ്രാവകങ്ങളിലോ മുക്കരുത്.
- ചാർജിംഗ് ഏരിയയിൽ നിന്ന് കുട്ടികളെയും വളർത്തുമൃഗങ്ങളെയും അകറ്റി നിർത്തുക.
- Avoid using extension cords with the charger.
- Operate the charger within its specified temperature range (-22°F to 122°F).
The Lectron Level 2 EV Charger is certified for safety and efficiency:
- ETL Certified (UL2594 standard): വടക്കേ അമേരിക്കൻ സുരക്ഷാ മാനദണ്ഡങ്ങൾ പാലിക്കുന്നത് ഉറപ്പാക്കുന്നു.
- FCC സാക്ഷ്യപ്പെടുത്തിയത്: Confirms electromagnetic compatibility.
- എനർജി സ്റ്റാർ സാക്ഷ്യപ്പെടുത്തിയത്: Indicates energy efficiency.
- IP65 റേറ്റുചെയ്തത്: Provides protection against dust ingress and low-pressure water jets.

3. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ
Setting up your Lectron Level 2 EV Charger is straightforward. Follow these steps for proper installation and initial use:
- ഒരു ലൊക്കേഷൻ തിരഞ്ഞെടുക്കുക: Select a dry, well-ventilated area near a NEMA 14-50 outlet. Ensure the 16-foot cable can comfortably reach your vehicle's charging port without tension.
- മൗണ്ടിംഗ് (ഓപ്ഷണൽ): The charger comes with a mounting bracket. Securely attach the bracket to a wall stud or suitable surface using appropriate hardware (not included). Hang the charger control unit on the mounted bracket.
- പവറിലേക്ക് ബന്ധിപ്പിക്കുക: Insert the NEMA 14-50 plug firmly into a dedicated 240V NEMA 14-50 outlet. The charger's "Power" LED indicator should illuminate, typically red, indicating it is receiving power.
- പ്രാരംഭ പരിശോധന: Observe the LED indicator lights on the control unit. Refer to the "Operating Instructions" section for the meaning of each light.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Once the charger is set up and connected to power, follow these steps to charge your electric vehicle:
- നിങ്ങളുടെ വാഹനം തയ്യാറാക്കുക: Ensure your vehicle is turned off and the charging port is accessible.
- വാഹനവുമായി ബന്ധിപ്പിക്കുക: Grasp the J1772 connector firmly and insert it into your vehicle's charging port. You should hear a click, indicating a secure connection.
- ചാർജിംഗ് നില നിരീക്ഷിക്കുക: The LED indicator lights on the charger control unit will change to reflect the charging status.
- ചുവപ്പ് (പവർ): Indicates the charger is powered on.
- Green (Connect): Illuminates when the charger is successfully connected to the vehicle.
- Blue (Charging): Blinks or stays solid blue when active charging is in progress.
- Yellow (Fault): Indicates an error or fault condition. Refer to the Troubleshooting section.
- ചാർജ്ജിംഗ് പൂർത്തിയായി: Once your vehicle's battery is fully charged, the charger will automatically stop charging. The "Charging" LED may turn off or change color depending on the vehicle's communication.
- വിച്ഛേദിക്കുക: Press the release button on the J1772 connector and carefully pull it out from your vehicle's charging port. Disconnect the NEMA 14-50 plug from the wall outlet if you intend to store the charger.


5. പരിപാലനം
Proper maintenance ensures the longevity and optimal performance of your Lectron Level 2 EV Charger.
വൃത്തിയാക്കൽ
- Always disconnect the charger from the power outlet before cleaning.
- Wipe the exterior of the charger and cables with a soft, damp തുണി.
- അബ്രാസീവ് ക്ലീനറുകൾ, ലായകങ്ങൾ, കഠിനമായ രാസവസ്തുക്കൾ എന്നിവ ഉപയോഗിക്കരുത്.
- Ensure all components are dry before reconnecting to power.
സംഭരണം
- When not in use, store the charger in a dry, clean, and cool place.
- Coil the cable neatly to prevent kinks or damage.
- Utilize the provided carrying case for protection during transport or storage.


6. പ്രശ്നപരിഹാരം
If you encounter issues with your Lectron Level 2 EV Charger, refer to the table below for common problems and solutions.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| No Power (Red LED off) | Charger not plugged in, outlet issue, or power outage. | Ensure the NEMA 14-50 plug is fully inserted. Check the circuit breaker for the outlet. Verify power to the outlet with another device. |
| Charger connected but not charging (Blue LED off/not blinking) | Vehicle not ready to charge, J1772 connector not fully inserted, or vehicle communication error. | Ensure the vehicle is ready to accept charge. Re-insert the J1772 connector firmly. Check vehicle's dashboard for charging status or errors. |
| Yellow Fault LED is on | Internal fault, overcurrent, overvoltage, or short circuit detected. | Disconnect the charger from both the vehicle and the power outlet. Wait 5 minutes, then reconnect. If the fault persists, contact customer support. |
| സ്ലോ ചാർജിംഗ് | Vehicle settings, or external factors affecting power delivery. | Check your vehicle's charging settings. Ensure no other high-power appliances are on the same circuit. |
If the problem persists after attempting these solutions, please contact Lectron customer support for further assistance.
7 സ്പെസിഫിക്കേഷനുകൾ
Detailed technical specifications for the Lectron Level 2 EV Charger:
| സ്പെസിഫിക്കേഷൻ | മൂല്യം |
|---|---|
| മോഡൽ നമ്പർ | LCHG-14-50-40A-BLK-US |
| റേറ്റുചെയ്ത കറൻ്റ് | 40 Amps |
| റേറ്റുചെയ്ത ഇൻപുട്ട്/ഔട്ട്പുട്ട് വോളിയംtage | 240 വോൾട്ട് |
| ചാർജിംഗ് നിരക്ക് | 9.6 kW വരെ |
| കണക്റ്റർ തരം | J1772 |
| പ്ലഗ് തരം | നെമ 14-50 |
| കേബിൾ നീളം | 16 അടി |
| കാലാവസ്ഥാ പ്രൂഫ് റേറ്റിംഗ് | IP65 |
| പ്രവർത്തന താപനില | -22°F മുതൽ 122°F വരെ (-30°C മുതൽ 50°C വരെ) |
| ഇനത്തിൻ്റെ ഭാരം | 14.57 പൗണ്ട് |
| സർട്ടിഫിക്കേഷനുകൾ | ETL, FCC, എനർജി സ്റ്റാർ |
8 അനുയോജ്യത
The Lectron Level 2 EV Charger is designed to be universally compatible with all electric vehicles and plug-in hybrid vehicles that utilize the J1772 charging standard.
This includes, but is not limited to, vehicles from manufacturers such as:
- മെഴ്സിഡസ്
- ബിഎംഡബ്ലിയു
- ഫോർഡ്
- ഹോണ്ട
- ഹ്യുണ്ടായ്
- കിയ
- പോർഷെ
- നിസ്സാൻ
- ചെവി
- റിവിയൻ
- ഫോക്സ്വാഗൺ

9. വാറൻ്റിയും പിന്തുണയും
Lectron products are manufactured with high-quality materials and undergo rigorous testing. This product is covered by a manufacturer's warranty against defects in materials and workmanship.
For warranty claims, technical support, or any inquiries regarding your Lectron Level 2 EV Charger, please visit the official Lectron website or contact their customer service department. Keep your purchase receipt as proof of purchase for warranty purposes.
കൂടുതൽ വിവരങ്ങൾക്ക്, നിങ്ങൾക്ക് സന്ദർശിക്കാവുന്നതാണ് Lectron Store on Amazon.





