Alpine S2-W8D2

Alpine S2-W8D2 8-inch S-Series Dual 2 Ohm Car Subwoofer Instruction Manual

Model: S2-W8D2

1. ആമുഖം

This manual provides detailed instructions for the setup, operation, and maintenance of your Alpine S2-W8D2 8-inch S-Series Dual 2 Ohm Car Subwoofer. The S2-W8D2 is designed to deliver powerful and reliable bass performance, enhancing your in-car audio experience.

The subwoofer features a lightweight yet sturdy combination of carbon fiber and polypropylene cone, engineered for deep, low-distortion bass reproduction across diverse music genres.

2. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Proper installation is crucial for optimal performance and longevity of your subwoofer. It is recommended that installation be performed by a qualified professional.

2.1 അൺപാക്കിംഗ്

Carefully remove the subwoofer from its packaging. Inspect for any signs of damage during transit. Retain all packaging materials for future use or in case of return.

2.2 മൗണ്ടിംഗ്

The S2-W8D2 is designed for flush mounting. Ensure the mounting location provides adequate clearance for the subwoofer's dimensions (10"D x 10"W x 5.5"H) and allows for proper ventilation. The twist-lock grille mounting system facilitates simple installation and removal of an optional grille, providing protection to the cone.

പിൻഭാഗം view of Alpine S2-W8D2 subwoofer showing mounting points

ചിത്രം 1: പിൻഭാഗം view of the Alpine S2-W8D2 subwoofer, illustrating the mounting points and overall structure.

2.3 വയറിംഗ് കണക്ഷനുകൾ

The S2-W8D2 features Dual Voice Coil (DVC) terminals. Proper wiring configuration is essential for matching the subwoofer's impedance to your amplifier's output. Utilize the easy configuration jumpers for series or parallel wiring as required by your amplifier and system design.

  • സീരീസ് വയറിംഗ്: Connect the positive terminal of one voice coil to the negative terminal of the other voice coil. Connect the remaining positive and negative terminals to the amplifier. This increases the total impedance.
  • സമാന്തര വയറിംഗ്: Connect both positive terminals together and both negative terminals together. Connect these combined terminals to the amplifier. This decreases the total impedance.

Always ensure secure connections to prevent signal loss or short circuits.

വശം view of Alpine S2-W8D2 subwoofer showing terminal connections

ചിത്രം 2: വശം view of the Alpine S2-W8D2 subwoofer, highlighting the DVC terminal connections.

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once installed and wired correctly, the S2-W8D2 subwoofer is ready for operation. Ensure your amplifier settings are appropriate for the subwoofer's specifications.

3.1 Ampലിഫയർ പൊരുത്തപ്പെടുത്തൽ

To maximize the potential of your S2-W8D2 subwoofer, pair it with a power-matched amplifier. The subwoofer has a power handling of 300W RMS and 900W peak.

  • For a single S2-W8D2, an amplifier providing approximately 300W RMS at the subwoofer's configured impedance is ideal.
  • For two S2-W8D2 subwoofers, an amplifier like the Alpine S2-A60M (600W mono amplifier) is recommended.
  • For up to four S2-W8D2 subwoofers, consider the Alpine S2-A120M (1200W amplifier) for optimal sound quality and performance.
Alpine S2-W8D2 subwoofer paired with an Alpine ampജീവപര്യന്തം

ചിത്രം 3: An Alpine S2-W8D2 subwoofer shown alongside a compatible Alpine ampജീവൻ.

3.2 Initial Power-Up and Adjustment

  1. എല്ലാ കണക്ഷനുകളും സുരക്ഷിതവും കൃത്യവുമാണെന്ന് ഉറപ്പാക്കുക.
  2. Turn on your car audio system and ampജീവൻ.
  3. ഉപയോഗിച്ച് ആരംഭിക്കുക amplifier's gain setting at its minimum.
  4. Play audio at a moderate volume.
  5. ക്രമേണ വർദ്ധിപ്പിക്കുക amplifier's gain until the desired bass level is achieved without distortion.
  6. Adjust crossover frequencies and phase settings on your amplifier or head unit to blend the subwoofer output seamlessly with your main speakers.

4. പരിപാലനം

The Alpine S2-W8D2 subwoofer requires minimal maintenance to ensure long-term performance.

  • വൃത്തിയാക്കൽ: Use a soft, dry cloth to gently wipe the cone and surround. Avoid using harsh chemicals or abrasive materials that could damage the speaker components.
  • പരിസ്ഥിതി വ്യവസ്ഥകൾ: Protect the subwoofer from extreme temperatures, direct sunlight, and excessive moisture. While the product is not waterproof, maintaining a stable environment will prolong its lifespan.
  • പരിശോധന: Periodically check all wiring connections for tightness and inspect the cone and surround for any signs of wear or damage.

5. പ്രശ്‌നപരിഹാരം

If you experience issues with your S2-W8D2 subwoofer, refer to the following common troubleshooting steps:

  • ശബ്ദമില്ല:
    • Check all power and signal connections to the ampലൈഫയറും സബ് വൂഫറും.
    • പരിശോധിച്ചുറപ്പിക്കുക amplifier is powered on and receiving a signal from the head unit.
    • ഉറപ്പാക്കുക amplifier's gain is not set to minimum and that the head unit's subwoofer output is enabled.
    • Check for blown fuses in the amplifier's power circuit.
  • വികലമായ ശബ്ദം:
    • കുറയ്ക്കുക amplifier's gain setting. Excessive gain can cause clipping and distortion.
    • Check the input signal level from the head unit; ensure it is not overdriven.
    • Verify the subwoofer's impedance matches the ampലിഫയറിന്റെ സ്ഥിരതയുള്ള പ്രവർത്തന പ്രതിരോധം.
    • Inspect the subwoofer cone and surround for any physical damage.
  • ദുർബലമായ ബാസ്:
    • വർദ്ധിപ്പിക്കുക amplifier's gain or the subwoofer level on your head unit.
    • Adjust the low-pass filter (LPF) setting on your amplifier or head unit. A higher LPF frequency allows more mid-bass to pass through.
    • Check the phase setting. Incorrect phase can cause bass cancellation.
    • Ensure the subwoofer is properly enclosed in an appropriate enclosure type and volume.

If problems persist after following these steps, consult a qualified car audio technician.

6 സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർസ്പെസിഫിക്കേഷൻ
മോഡലിൻ്റെ പേര്S2-W8D2
സ്പീക്കർ വലിപ്പം8 ഇഞ്ച്
പവർ ഹാൻഡ്ലിംഗ് (RMS)300 വാട്ട്സ്
പവർ ഹാൻഡ്ലിംഗ് (പീക്ക്)900 വാട്ട്സ്
പ്രതിരോധംഡ്യുവൽ 2 ഓംസ്
ഫ്രീക്വൻസി പ്രതികരണം23Hz - 215Hz
സംവേദനക്ഷമത (1W/1 മി)82.6dB
കോൺ മെറ്റീരിയൽCarbon Fiber and Polypropylene
ചുറ്റുകഉയർന്നത് Amplitude Multi-Roll (H.A.M.R.)
മൗണ്ടിംഗ് തരംഫ്ലഷ് മ .ണ്ട്
ഉൽപ്പന്ന അളവുകൾ (D x W x H)10"D x 10"W x 5.5"H
ഇനത്തിൻ്റെ ഭാരം7.2 പൗണ്ട്
ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾS2-W8D2 Subwoofer
യു.പി.സി793276085276

7. വാറൻ്റി വിവരങ്ങൾ

The Alpine S2-W8D2 subwoofer comes with a പരിമിത വാറൻ്റി. Please refer to the warranty card included with your product or visit the official Alpine website for detailed terms and conditions, including coverage period and claim procedures.

8. പിന്തുണ

For further assistance, technical support, or inquiries regarding your Alpine S2-W8D2 subwoofer, please contact Alpine customer service or visit their official webസൈറ്റ്.

  • നിർമ്മാതാവ്: ആൽപൈൻ
  • ഓൺലൈൻ പിന്തുണ: സന്ദർശിക്കുക ആമസോണിലെ ആൽപൈൻ സ്റ്റോർ or the official Alpine webഉൽപ്പന്ന വിവരങ്ങൾ, പതിവുചോദ്യങ്ങൾ, ബന്ധപ്പെടാനുള്ള വിശദാംശങ്ങൾ എന്നിവയ്‌ക്കുള്ള സൈറ്റ്.

അനുബന്ധ രേഖകൾ - S2-W8D2

പ്രീview ആൽപൈൻ എസ്2-സീരീസ് സബ്‌വൂഫർ ആപ്ലിക്കേഷൻ ഗൈഡും സ്പെസിഫിക്കേഷനുകളും
S2-W8D2, S2-W8D4, S2-W10D2, S2-W10D4, S2-W12D2, S2-W12D4 എന്നീ മോഡലുകൾ ഉൾപ്പെടെ ആൽപൈൻ S2-സീരീസ് സബ്‌വൂഫറുകൾക്കായുള്ള സമഗ്രമായ ആപ്ലിക്കേഷൻ ഗൈഡ്, സാങ്കേതിക സവിശേഷതകൾ, എൻക്ലോഷർ ശുപാർശകൾ, ഇൻസ്റ്റാളേഷൻ കുറിപ്പുകൾ. വിശദമായ ഘടക വിവരണങ്ങൾ, വയറിംഗ് ഡയഗ്രമുകൾ, വാറന്റി വിവരങ്ങൾ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview ആൽപൈൻ R/S-DB8V-TRK ട്രക്ക് സബ്‌വൂഫർ എൻക്ലോഷർ ഇൻസ്റ്റലേഷൻ ഗൈഡ്
ട്രക്കുകൾക്കായുള്ള ആൽപൈൻ R/S-DB8V-TRK ഡ്യുവൽ 8-ഇഞ്ച് സബ്‌വൂഫർ വെന്റഡ് എൻക്ലോഷറിനായുള്ള ഘട്ടം ഘട്ടമായുള്ള ഇൻസ്റ്റാളേഷൻ ഗൈഡ്, സുരക്ഷാ മുൻകരുതലുകൾ, ഉപകരണങ്ങൾ, ആക്‌സസറികൾ, വാഹന അനുയോജ്യത എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview ALPINE R/S-DB8V-TRK ട്രക്ക് എൻക്ലോഷർ ഇൻസ്റ്റലേഷൻ മാനുവൽ
R2-W8D2, S-W8D2 മോഡലുകളുമായുള്ള അനുയോജ്യത വിശദീകരിക്കുന്ന, ALPINE R/S-DB8V-TRK ട്രക്ക് എൻക്ലോഷറിനായുള്ള സമഗ്രമായ ഇൻസ്റ്റാളേഷൻ ഗൈഡ്. സുരക്ഷാ മുൻകരുതലുകൾ, ആവശ്യമായ ഉപകരണങ്ങൾ, ആക്സസറി ലിസ്റ്റുകൾ, ഘട്ടം ഘട്ടമായുള്ള അസംബ്ലി നിർദ്ദേശങ്ങൾ, വാഹന-നിർദ്ദിഷ്ട ഫിറ്റ്മെന്റ് ശുപാർശകൾ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview ആൽപൈൻ R2-സീരീസ് സബ്‌വൂഫർ ആപ്ലിക്കേഷൻ ഗൈഡും സ്പെസിഫിക്കേഷനുകളും
R2-W12D4, R2-W12D2, R2-W10D4, R2-W10D2, R2-W8D4, R2-W8D2 എന്നീ മോഡലുകൾ ഉൾപ്പെടെ ആൽപൈൻ R2-സീരീസ് സബ്‌വൂഫറുകൾക്കായുള്ള സമഗ്രമായ ആപ്ലിക്കേഷൻ ഗൈഡും സാങ്കേതിക സവിശേഷതകളും. ഘടക വിശദാംശങ്ങൾ, വയറിംഗ് ഡയഗ്രമുകൾ, എൻക്ലോഷർ ശുപാർശകൾ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview ആൽപൈൻ DM-65C കമ്പോണന്റ് സ്പീക്കർ സിസ്റ്റം ഇൻസ്റ്റാളേഷനും സ്പെസിഫിക്കേഷനുകളും
വയറിംഗ് ഡയഗ്രമുകൾ, മൗണ്ടിംഗ് നിർദ്ദേശങ്ങൾ, ഉൽപ്പന്ന സവിശേഷതകൾ എന്നിവയുൾപ്പെടെ ആൽപൈൻ DM-65C 2-വേ കമ്പോണന്റ് സ്പീക്കർ സിസ്റ്റത്തിനായുള്ള ഇൻസ്റ്റലേഷൻ ഗൈഡും സാങ്കേതിക സവിശേഷതകളും.
പ്രീview ആൽപൈൻ S2-S69 കോക്സിയൽ 2-വേ സ്പീക്കർ സിസ്റ്റം - ഇൻസ്റ്റാളേഷൻ, സ്പെസിഫിക്കേഷനുകൾ, വാറന്റി
ആൽപൈൻ S2-S69 കോക്സിയൽ 2-വേ സ്പീക്കർ സിസ്റ്റത്തിനായുള്ള വിശദമായ വിവരങ്ങൾ, ഇൻസ്റ്റലേഷൻ മാർഗ്ഗനിർദ്ദേശങ്ങൾ, സാങ്കേതിക സവിശേഷതകൾ, പരിമിതമായ വാറന്റി വിശദാംശങ്ങൾ എന്നിവ ഉൾപ്പെടുന്നു. ഉൽപ്പന്ന സവിശേഷതകൾ, പവർ കൈകാര്യം ചെയ്യൽ, പാലിക്കൽ എന്നിവയെക്കുറിച്ച് അറിയുക.