Lenco LS-600WA

ലെൻകോ LS-600WA റെക്കോർഡ് പ്ലെയർ ഉപയോക്തൃ മാനുവൽ

മോഡൽ: LS-600WA

ആമുഖം

വാങ്ങിയതിന് നന്ദി.asing the Lenco LS-600WA Record Player. This manual provides essential information for the safe and correct operation of your device. Please read it thoroughly before use and retain it for future reference.

പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

പാക്കേജ് ഉള്ളടക്കം

താഴെ ലിസ്റ്റ് ചെയ്തിരിക്കുന്ന എല്ലാ ഇനങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉൾപ്പെടുത്തിയിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക:

Lenco LS-600WA Record Player with two external speakers and dust cover

Image: Lenco LS-600WA Record Player with included speakers and dust cover.

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Lenco LS-600WA is a belt-drive record player featuring a built-in amplifier and two external stereo speakers. It is equipped with a high-quality Audio-Technica AT-VM95E moving magnetic cartridge.

Close-up of the tonearm and AT-VM95E cartridge on the Lenco LS-600WA

Image: Detail of the tonearm and AT-VM95E cartridge.

പ്രധാന ഘടകങ്ങൾ:

ടോപ്പ് ഡൗൺ view of the Lenco LS-600WA record player showing controls and tonearm

ചിത്രം: മുകളിൽ view of the record player, highlighting the tonearm and control panel.

സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

  1. അൺപാക്ക് ചെയ്യുന്നു: പാക്കേജിംഗിൽ നിന്ന് എല്ലാ ഘടകങ്ങളും ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്യുക.
  2. പ്ലേസ്മെൻ്റ്: Place the record player on a stable, level surface away from direct sunlight, heat sources, or excessive vibration. Position the speakers on either side of the record player for optimal stereo separation.
  3. പ്ലാറ്റർ ഇൻസ്റ്റാളേഷൻ: പ്ലേറ്റർ സ്പിൻഡിൽ വയ്ക്കുക.
  4. ബെൽറ്റ് ഇൻസ്റ്റാളേഷൻ: Locate the drive belt and carefully loop it around the motor pulley and the inner rim of the platter.
  5. പൊടി കവർ: Attach the dust cover to the hinges at the back of the record player.
  6. കൌണ്ടർവെയ്റ്റ് ക്രമീകരണം:
    • Slide the counterweight onto the rear of the tonearm.
    • Balance the tonearm so it floats horizontally.
    • Rotate the counterweight to achieve the recommended tracking force (refer to cartridge specifications, typically 1.8g - 2.2g for AT-VM95E).
  7. Anti-skating Adjustment: Attach the anti-skating weight to the tonearm's anti-skating post. The recommended setting usually matches the tracking force.
  8. സ്പീക്കർ കണക്ഷൻ: Connect the included external speakers to the speaker output terminals on the rear of the record player using the provided speaker wires. Ensure correct polarity (+ to + and - to -).
  9. പവർ കണക്ഷൻ: Connect the mains adapter to the record player's power input and then plug it into a wall outlet.
പിൻഭാഗം view of the Lenco LS-600WA record player showing input/output ports and speaker connections

Image: Rear panel connections for speakers and power.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

  1. പവർ ഓൺ: Press the power button (usually combined with mode selection) to turn on the record player.
  2. വേഗത തിരഞ്ഞെടുക്കുക: Choose the appropriate speed (33 or 45 RPM) using the speed selector button, matching the record you intend to play.
  3. സ്ഥല രേഖ: Carefully place a record on the platter. If playing a 45 RPM single, use the included adapter if necessary.
  4. ലിഫ്റ്റ് ടോൺ ആം: ടോൺ ആം ഉയർത്താൻ ടോൺ ആം ലിഫ്റ്റ് ലിവർ ഉപയോഗിക്കുക.
  5. ടോൺആം സ്ഥാനം: റെക്കോർഡിന്റെ ആവശ്യമുള്ള സ്റ്റാർട്ടിംഗ് ഗ്രൂവിന് മുകളിലൂടെ ടോൺആം സൌമ്യമായി നീക്കുക.
  6. താഴത്തെ ടോൺ ആം: Slowly lower the tonearm using the lift lever. The stylus will descend onto the record, and playback will begin.
  7. വോളിയം ക്രമീകരിക്കുക: Use the volume control knob to adjust the audio output level from the speakers.
  8. താൽക്കാലികമായി നിർത്തുക/നിർത്തുക: To pause playback, use the tonearm lift lever to raise the tonearm. To stop, lift the tonearm, return it to its rest, and power off the unit.
Close-up of the Lenco LS-600WA control panel with speed and volume controls

Image: Control panel for speed selection and volume.

മെയിൻ്റനൻസ്

സ്റ്റൈലസ് വൃത്തിയാക്കൽ:

റെക്കോർഡ് പ്ലെയർ വൃത്തിയാക്കൽ:

റെക്കോർഡ് കെയർ:

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ശക്തിയില്ലപവർ അഡാപ്റ്റർ ബന്ധിപ്പിച്ചിട്ടില്ല; ഔട്ട്ലെറ്റ് സജീവമല്ല.പവർ അഡാപ്റ്റർ സുരക്ഷിതമായി ബന്ധിപ്പിച്ചിട്ടുണ്ടെന്നും ഔട്ട്‌ലെറ്റ് പ്രവർത്തനക്ഷമമാണെന്നും ഉറപ്പാക്കുക.
ശബ്ദമില്ലSpeakers not connected; volume too low; stylus damaged.Check speaker connections; increase volume; inspect stylus for damage.
വികലമായ ശബ്ദംDirty stylus; incorrect tracking force; damaged record.Clean stylus; re-adjust tracking force; try a different record.
Skipping recordIncorrect tracking force; anti-skating not set; dirty/damaged record.Adjust tracking force and anti-skating; clean record; check for scratches.
തെറ്റായ വേഗതതെറ്റായ വേഗത തിരഞ്ഞെടുത്തു.Select the correct speed (33 or 45 RPM) for the record.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Lenco customer service. Keep your proof of purchase for warranty claims.