1. ആമുഖം
Thank you for choosing the Locstar Smart Door Lock LS-8015. This manual provides detailed instructions for the installation, operation, and maintenance of your new smart lock. Please read this manual thoroughly before installation and keep it for future reference to ensure optimal performance and security.
2. ഉൽപ്പന്നം കഴിഞ്ഞുview ഘടകങ്ങളും
The Locstar Smart Door Lock LS-8015 is designed for enhanced security and convenience, featuring a keypad for keyless entry and a mechanical key for backup. It is suitable for various applications including homes, hotels, apartments, and offices.
Figure 2.1: Product Detail Presentation. This image highlights key features such as the battery box, aluminum alloy construction, password unlock, and key unlock mechanisms.
Figure 2.2: Components. This image displays all the individual parts included with the smart door lock, such as the front and rear panels, spring bolt, pivot, keys, instruction book, protective pads, door buckle, and various screws for assembly.
ഉൽപ്പന്ന അളവുകൾ
Figure 2.3: Product Size. Detailed dimensions of the lock components in millimeters, crucial for proper installation and fit.
3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
The LS-8015 is designed for user-friendly DIY installation. Follow these steps carefully for a successful setup.
Video 3.1: Locstar Smart Lock Installation and Setup. This official video from the seller provides a comprehensive guide to installing and setting up your Locstar Smart Lock, covering unpacking, assembly, and initial configuration.
ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ
- ഘടകങ്ങൾ തയ്യാറാക്കുക: Ensure you have all components as shown in Figure 2.2.
- Determine Door Direction: Identify if your door is right-handed or left-handed, and if it's a pull or push door. This is crucial for correct handle orientation.
Figure 3.1: Door Direction. This diagram illustrates how to determine the correct door direction (left-handed or right-handed open) based on whether it's a pull or push door, which is essential for proper lock installation.
- ദ്വാരങ്ങൾ അടയാളപ്പെടുത്തി തുരക്കുക: Use the provided opening template to position and draw lines on the door frame, then drill holes according to these positions.
- Install Lock Mortise: Install the lock mortise. It can be adjusted to be 60mm or 70mm.
- Assemble Front Panel: Install the front panel, rubber pads, and insert the square shaft into the hole.
- Assemble Rear Bottom Plate: Install the rear bottom plate, put the bottom rubber pads into the back bottom plate, and fix the front panel with screws.
- Connect Cables and Install Batteries: Put the cable into the rear plate, correctly load 4 AA batteries accordingly, and check whether the power is normal.
- പിൻ പാനൽ ഇൻസ്റ്റാൾ ചെയ്യുക: Install the rear panel and secure it with screws.
Figure 3.2: Installation Steps. A visual guide detailing the 12 steps for installing the smart door lock, from preparing accessories to covering the back panel.
4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Initial Debugging
After installation, press down the front handle to confirm the free state. Press down the handle; it should open the door normally. Enter the initial password on the front panel, then press down the handle; it should open the lock normally.
Opening with Mechanical Key
To open the door by mechanical key, press the button on the front handle cover. You will find the keyhole. Insert the key and turn, then press down the handle to open the door normally.
Setting the Master Password
- Enter #+123456+# to enter the setting mode.
- Enter 11# and the new master password +#. Enter the master password +# again for confirmation.
Adding a Password User
- Enter the new master password +# to enter the setting mode.
- Enter 01+# to confirm, and enter user number (001-299) +# to confirm.
- Enter the user password +# to confirm.
- Enter the start time +# to confirm and the end time +#+# to confirm.
Password Door Opening Operation
- Enter the user password +# to confirm.
- Press the handle to open the door, indicating that the password is set successfully.
5. പരിപാലനം
- ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: The low battery indicator will remind you to replace the battery in time. Use 4 AA batteries.
- വൃത്തിയാക്കൽ: മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിച്ച് ലോക്ക് ഉപരിതലം തുടയ്ക്കുക. ഫിനിഷിനോ ഇലക്ട്രോണിക് ഘടകങ്ങൾക്കോ കേടുവരുത്തുന്ന അബ്രാസീവ് ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കുന്നത് ഒഴിവാക്കുക.
- കാലാവസ്ഥ സംരക്ഷണം: The IP54 waterproof design protects against rain, but avoid prolonged exposure to extreme weather conditions or direct water submersion.
6. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Lock not responding to keypad | Low batteries; Incorrect code entered. | Replace batteries; Re-enter correct code. |
| Handle does not engage lock | Incorrect installation of square shaft; Lock mechanism issue. | Check square shaft insertion; Contact support if issue persists. |
| Automatic locking not working | Feature not enabled or incorrectly configured. | Refer to operating instructions to enable/configure automatic locking. |
7 സ്പെസിഫിക്കേഷനുകൾ
- ബ്രാൻഡ്: ലോക്സ്റ്റാർ
- മോഡലിൻ്റെ പേര്: സ്മാർട്ട് ഡോർ ലോക്ക്
- ഇനം മോഡൽ നമ്പർ: LS-8015
- ലോക്ക് തരം: കീപാഡ്
- മെറ്റീരിയൽ: സിങ്ക്
- നിറം: വെള്ളി
- ശൈലി: വലത് ഹാൻഡിൽ
- ഇനത്തിന്റെ അളവുകൾ (L x W x H): 9.44 x 4.72 x 7.87 ഇഞ്ച്
- ഇനത്തിൻ്റെ ഭാരം: 4.4 പൗണ്ട്
- നിയന്ത്രണ രീതി: സ്പർശിക്കുക
- ഊർജ്ജ സ്രോതസ്സ്: 4 AA ബാറ്ററികൾ (ഉൾപ്പെടുത്തിയിട്ടില്ല)
- പ്രത്യേക സവിശേഷതകൾ: Door lock with handle, Keyless entry, Outdoor security, Smart locks
- UPC: 768481211741
- മാതൃരാജ്യം: ചൈന
8. വാറൻ്റിയും പിന്തുണയും
Locstar provides a 12 മാസ വാറൻ്റി ഒപ്പം ആജീവനാന്ത സാങ്കേതിക പിന്തുണ for the Smart Door Lock LS-8015. Your satisfaction is important to us. If you have any questions or require assistance, please feel free to contact us. We are committed to providing fast and friendly service.
വാറൻ്റി വിവരണം: 30 days money back, 1 year warranty and lifetime technical support. 24/7 online after-sales email service!
