ആമുഖം
Thank you for choosing the BLNAN Motion Sensor LED Ceiling Light. This 18W, 1800LM, 8.7-inch wired flush mount fixture features a radar motion sensor and remote control for versatile lighting in various indoor and outdoor settings. This manual provides important information for safe installation, operation, and maintenance of your new light fixture.
സുരക്ഷാ വിവരങ്ങൾ
ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനും ഉപയോഗിക്കുന്നതിനും മുമ്പ് ദയവായി എല്ലാ നിർദ്ദേശങ്ങളും ശ്രദ്ധാപൂർവ്വം വായിക്കുക. ഭാവിയിലെ റഫറൻസിനായി ഈ മാനുവൽ സൂക്ഷിക്കുക.
- ഇലക്ട്രിക്കൽ സുരക്ഷ: Always turn off power at the circuit breaker before installing, servicing, or cleaning the fixture. Consult a qualified electrician if you are unsure about wiring.
- വാല്യംtage: This fixture operates on 120V AC. Do not attempt to connect it to any other voltage.
- ഇൻസ്റ്റാളേഷൻ സ്ഥാനം: Ensure the mounting surface can support the weight of the fixture. This light is suitable for damp locations (IP54 waterproof rating), including bathrooms and showers.
- ചൂട്: Do not touch the fixture immediately after operation as it may be hot.
- ഇടപെടൽ: The 5.8G radar motion sensor can be affected by 5G signals. Install the light at least 3 meters away from 5G signal sources to avoid interference. If installing multiple radar sensing lights, ensure they are more than 3 meters apart to prevent mutual interference.
ബോക്സിൽ എന്താണുള്ളത്
ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക.
- Motion Detector Ceiling Light (2 units)
- റിമോട്ട് കൺട്രോൾ
- മൗണ്ടിംഗ് ഹാർഡ്വെയർ (സ്ക്രൂകൾ, വയർ നട്ടുകൾ)
- നിർദ്ദേശ മാനുവൽ (ഈ പ്രമാണം)

ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ
This LED flush mount ceiling lamp requires hardwired installation. It operates with 120V AC. It can be mounted to the ceiling or wall.
- പവർ ഓഫ് ചെയ്യുക: ആരംഭിക്കുന്നതിന് മുമ്പ്, സർക്യൂട്ട് ബ്രേക്കറിൽ ഇൻസ്റ്റലേഷൻ ഏരിയയിലേക്കുള്ള പവർ സപ്ലൈ ഓഫാക്കിയിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
- മൗണ്ടിംഗ് ഉപരിതലം തയ്യാറാക്കുക: ലോ-പ്രോfile design is suitable for mounting onto a junction box with a size between 2.75 inches and 3.54 inches.
- വയറിംഗ് ബന്ധിപ്പിക്കുക: Connect the fixture's wires to the corresponding household wires (Live, Neutral, Ground) using the provided wire nuts. Ensure all connections are secure.
- മൗണ്ട് ഫിക്ചർ: Secure the fixture to the junction box using the provided screws. Ensure the fixture is flush against the mounting surface.
- പവർ പുന ore സ്ഥാപിക്കുക: ഫിക്സ്ചർ സുരക്ഷിതമായി ഘടിപ്പിച്ച് വയറിംഗ് ചെയ്തുകഴിഞ്ഞാൽ, സർക്യൂട്ട് ബ്രേക്കറിൽ പവർ പുനഃസ്ഥാപിക്കുക.


പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Your BLNAN ceiling light features a radar motion sensor, light sensor, and remote control for customizable operation.
വിദൂര നിയന്ത്രണ പ്രവർത്തനങ്ങൾ
The included remote control allows you to adjust various settings:
- കണ്ടെത്തൽ പരിധി: Adjust the motion detection range to 6.5 ft (25%), 13.1 ft (50%), or 19.6 ft (100%).
- ലൈറ്റ് സെൻസർ: Set the ambient light threshold for activation (15 lux, 50 lux) or disable it. When disabled, the light will activate based on motion regardless of ambient light.
- ഹോൾഡ് സമയം: Configure how long the light stays on after motion is no longer detected (5 seconds, 30 seconds, 1 minute, 5 minutes).
- ഓൺ/ഓഫ്: ലൈറ്റ് സ്വമേധയാ ഓണാക്കുകയോ ഓഫാക്കുകയോ ചെയ്യുക.
- പുന et സജ്ജമാക്കുക: Resets settings to default (blue buttons on the remote).

ലഭ്യമായ മോഡുകൾ
You can customize the light's behavior using the remote control:
- സ്ഥിരമായ ലൈറ്റ് മോഡ്: Turn the light to "ON" using the remote. The LED light will remain on continuously, functioning as a standard 4000K white ceiling light.
- മോഷൻ ആക്ടിവേറ്റഡ് മോഡ്: The light turns on when motion is detected and turns off after the set hold time when no motion is present. The light sensor is disabled in this mode.
- Motion Activated with Light Sensor Mode: The light turns on when motion is detected, but only if the ambient light level is below the set lux threshold (e.g., 15 lux or 50 lux). It turns off after the set hold time when no motion is present and ambient light is sufficient. Note: The light automatically turns off during the day if the light sensor is enabled and sufficient daylight is present.
- റീസെറ്റ് മോഡ്: എല്ലാ ക്രമീകരണങ്ങളും അവരുടെ ഫാക്ടറി ഡിഫോൾട്ടുകളിലേക്ക് തിരികെ നൽകുന്നു.


മെയിൻ്റനൻസ്
To ensure optimal performance and longevity of your BLNAN LED Ceiling Light, follow these maintenance guidelines:
- വൃത്തിയാക്കൽ: വൃത്തിയാക്കുന്നതിന് മുമ്പ് വൈദ്യുതി വിച്ഛേദിക്കുക. മൃദുവായതോ, ഉണങ്ങിയതോ, അല്ലെങ്കിൽ ചെറുതായി ഡി-കവർ ചെയ്തതോ ആയ ഒരു ക്ലീനർ ഉപയോഗിച്ച് ഫിക്സ്ചർ തുടയ്ക്കുക.amp തുണി. ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
- ബൾബ് മാറ്റിസ്ഥാപിക്കൽ: The LED light source is integrated and non-removable. Do not attempt to replace the LEDs.
- പരിശോധന: Periodically check the wiring and mounting for any signs of damage or loosening.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ലൈറ്റ് ഓണാക്കില്ല. | No power; incorrect wiring; light sensor detects too much ambient light; motion sensor disabled. | Check circuit breaker. Verify wiring connections. Adjust light sensor sensitivity or disable it via remote. Ensure motion sensor is enabled. |
| വെളിച്ചം നിരന്തരം കത്തിക്കൊണ്ടിരിക്കുന്നു. | Set to "Constant Light Mode"; continuous motion detected; hold time set too long. | Switch to motion-activated mode using the remote. Ensure no continuous motion is within detection range. Reduce hold time setting. |
| Motion sensor is inconsistent or too sensitive. | Incorrect detection range setting; interference from 5G signals or other radar lights; small moving objects (pets) triggering sensor. | Adjust the detection range via remote. Ensure light is at least 3 meters from 5G sources or other radar lights. Consider placement to avoid small object detection. |
| ലൈറ്റ് മിന്നുന്നു. | Unstable power supply; loose wiring connection. | Check power supply stability. Verify all wiring connections are secure. |
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | BLNAN |
| മോഡൽ നമ്പർ | LS-CL-C18W-M-S |
| ശക്തി | 18W |
| തെളിച്ചം | 1800 ല്യൂമെൻസ് |
| വർണ്ണ താപനില | 4000K (വെള്ള) |
| വാല്യംtage | 120V എസി |
| അളവുകൾ | 8.7"L x 8.7"W x 1.88"H (22cm x 22cm x 4.8cm) |
| മെറ്റീരിയൽ | തീപിടിക്കാത്ത പ്ലാസ്റ്റിക് |
| ജല പ്രതിരോധ നില | IP54 (ജലപ്രൂഫ്) |
| സെൻസർ തരം | Radar Microwave Motion Sensor + Light Sensor |
| നിയന്ത്രണ രീതി | റിമോട്ട് കൺട്രോൾ |
| CRI (കളർ റെൻഡറിംഗ് സൂചിക) | 90 |
| ജീവിതകാലയളവ് | 30,000 മണിക്കൂറിലധികം |
| ഇൻസ്റ്റലേഷൻ തരം | Flush Mount (Ceiling or Wall) |
| Junction Box Compatibility | 2.75" - 3.54" |
വാറൻ്റിയും പിന്തുണയും
This BLNAN product comes with a Limited Warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact BLNAN customer service through the retailer where the product was purchased or visit the official BLNAN webസൈറ്റ്.
നിർമ്മാതാവ്: BLNAN





