ആമുഖം
This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your HYCHIKA Mini Portable Air Compressor. Please read this manual thoroughly before using the device and retain it for future reference.
സുരക്ഷാ നിർദ്ദേശങ്ങൾ
- ആദ്യ ഉപയോഗത്തിന് മുമ്പ് ഉപകരണം പൂർണ്ണമായി ചാർജ്ജ് ചെയ്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
- Do not operate the compressor in wet conditions or near flammable liquids/gases.
- കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
- Do not over-inflate. Always check the recommended pressure for the item being inflated.
- അമിതമായി ചൂടാകുന്നത് തടയാൻ ദീർഘനേരം തുടർച്ചയായി പ്രവർത്തിക്കുന്നത് ഒഴിവാക്കുക. ഉപകരണം ചൂടായാൽ അത് തണുക്കാൻ അനുവദിക്കുക.
- Use only the provided accessories and charging cables.
- If the device malfunctions, discontinue use immediately and contact customer support.
പാക്കേജ് ഉള്ളടക്കം
നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:
- HYCHIKA Mini Portable Air Compressor
- ഇൻഫ്ലറ്റബിൾ ഹോസ്
- 4 Extra Nozzles (for various applications like bikes, balls, life buoys)
- യുഎസ്ബി ടൈപ്പ്-സി ചാർജിംഗ് കേബിൾ
- 12V DC Car Cigarette Lighter Power Plug
- ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

Figure 1: Package Contents - Main compressor unit, inflatable hose, various nozzles, USB-C charging cable, and 12V car power adapter.
ഉൽപ്പന്നം കഴിഞ്ഞുview

Figure 2: Product Components - Front panel with LCD display and control buttons, LED light, and air hose connection port.
- LCD ഡിസ്പ്ലേ: നിലവിലെ മർദ്ദം, ലക്ഷ്യ മർദ്ദം, ബാറ്ററി നില, തിരഞ്ഞെടുത്ത മോഡ് എന്നിവ കാണിക്കുന്നു.
- നിയന്ത്രണ ബട്ടണുകൾ:
- പവർ ബട്ടൺ: ഉപകരണം ഓൺ/ഓഫ് ചെയ്യുന്നു.
- മോഡ്/യൂണിറ്റ് ബട്ടൺ: Cycles through inflation modes (Car, Motorcycle, Bike, Ball, Manual) and pressure units (PSI, BAR, KPA, KG/CM²).
- '+' ബട്ടൺ: Increases target pressure.
- '-' ബട്ടൺ: Decreases target pressure.
- LED/SOS Button: Activates the LED light and SOS flashing mode.
- Air Hose Interface: Connection point for the inflatable hose.
- LED ലൈറ്റുകൾ: ഇരുണ്ട സാഹചര്യങ്ങളിൽ ഉപയോഗിക്കുന്നതിന് പ്രകാശം നൽകുന്നു.
- USB-C ചാർജിംഗ് പോർട്ട്: For charging the compressor.
- USB-A ഔട്ട്പുട്ട് പോർട്ട്: ഉപകരണം ഒരു പവർ ബാങ്കായി ഉപയോഗിക്കുന്നതിന്.
കംപ്രസ്സർ ചാർജ് ചെയ്യുന്നു
Before first use, fully charge the compressor. The device can be charged using the provided USB Type-C cable or the 12V DC car cigarette lighter power plug.
- Connect the USB Type-C cable to the compressor's charging port and to a suitable USB power adapter (not included) or the 12V car charger to your vehicle's cigarette lighter socket.
- എൽസിഡി സ്ക്രീനിലെ ബാറ്ററി ഇൻഡിക്കേറ്റർ ചാർജിംഗ് നില കാണിക്കും.
- Charging is complete when the battery indicator shows a full charge.
സജ്ജീകരണവും പ്രവർത്തനവും
1. Connecting the Air Hose and Nozzle
- Screw the inflatable hose clockwise into the air hose interface on the top of the compressor. Ensure it is securely tightened.
- നിങ്ങൾ വീർപ്പിക്കാൻ ആഗ്രഹിക്കുന്ന ഇനത്തിന് അനുയോജ്യമായ നോസൽ തിരഞ്ഞെടുക്കുക.

Figure 3: Valve Compatibility - The compressor supports various valve types for cars, bikes, balls, and life buoys using the included adapters.
- Attach the selected nozzle to the end of the inflatable hose.
2. Powering On and Setting Pressure
- Press and hold the Power Button to turn on the compressor. The LCD screen will illuminate.
- Connect the nozzle to the valve of the item you intend to inflate. The LCD display will show the current pressure.
- Press the Mode/Unit Button to cycle through the preset inflation modes (Car, Motorcycle, Bike, Ball) or select Manual Mode.

Figure 4: Inflation Modes - The compressor offers preset modes for various items and a manual mode for custom pressure settings.
- Use the '+' and '-' buttons to adjust the target pressure. The device supports a maximum pressure of 150 PSI (10.3 Bar).
- To change pressure units (PSI, BAR, KPA, KG/CM²), press and hold the Mode/Unit Button.
3. പണപ്പെരുപ്പം ആരംഭിക്കുന്നതും നിർത്തുന്നതും
- Once the target pressure is set, press the Power Button to start inflation.
- The compressor will automatically stop when the target pressure is reached.
- To manually stop inflation at any time, press the Power Button again.
- After inflation, quickly disconnect the hose from the valve to minimize air loss.

Figure 5: Inflation Process - Step-by-step guide from connecting the hose to automatic shut-off.
അധിക പ്രവർത്തനങ്ങൾ
LED Light and SOS Function
The compressor is equipped with an LED light for illumination in low-light conditions and an SOS flashing mode for emergencies.
- Press the LED/SOS Button once to turn on the LED light.
- Press the LED/SOS Button again to activate the SOS flashing mode.
- Press the LED/SOS Button a third time to turn off the light.

Figure 6: LED and SOS Function - The integrated LED light provides illumination and an SOS signal for emergencies.
പവർ ബാങ്ക് പ്രവർത്തനം
The built-in 6000mAh battery allows the compressor to function as a portable power bank for charging mobile devices.
- Connect your mobile device's charging cable to the USB-A output port on the compressor.
- The compressor will begin charging your device.
- Disconnect your device when charging is complete.

Figure 7: Power Bank Feature - The compressor can charge mobile phones using its 6000mAh battery.
മെയിൻ്റനൻസ്
- വൃത്തിയാക്കൽ: Wipe the exterior of the compressor with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
- സംഭരണം: Store the compressor in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure it is fully charged before long-term storage to preserve battery life.
- ബാറ്ററി കെയർ: To maintain battery health, charge the device at least once every three months, even if not in use.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| കംപ്രസ്സർ ഓണാക്കുന്നില്ല. | ബാറ്ററി കുറവാണ് അല്ലെങ്കിൽ ചാർജ് ഇല്ല. | Charge the compressor fully using the provided cable. |
| Compressor inflates slowly or not at all. | Hose not securely connected; incorrect nozzle; valve leakage; item too large. | Ensure hose and nozzle are tightly connected. Verify correct nozzle for valve type. Check for leaks. For very large items, inflation time will be longer. |
| കൃത്യമല്ലാത്ത മർദ്ദ വായന. | Hose not properly connected to valve. | Ensure a tight seal between the nozzle and the item's valve. |
| Compressor overheats and shuts off. | നീണ്ടുനിൽക്കുന്ന തുടർച്ചയായ പ്രവർത്തനം. | Allow the compressor to cool down for at least 10-15 minutes before resuming use. Avoid continuous operation for more than 10 minutes. |
സ്പെസിഫിക്കേഷനുകൾ
| മോഡൽ നമ്പർ | MS22C-002 |
| ബ്രാൻഡ് | ഹിച്ചിക |
| ഇൻപുട്ട് വോളിയംtage | 12V DC |
| ബാറ്ററി ശേഷി | 6000mAh ലിഥിയം അയൺ |
| പരമാവധി മർദ്ദം | 150 PSI (10.3 ബാർ) |
| Working Accuracy | ± 1.5 PSI |
| മർദ്ദം യൂണിറ്റുകൾ | PSI, BAR, KPA, KG/CM² |
| അളവുകൾ | 21.2 x 9.7 x 9.6 സെ.മീ (ഏകദേശം) |
| ഭാരം | 840 ഗ്രാം (ഏകദേശം) |
| പവർ ഉറവിടം | Battery Powered / 12V DC Car Charger |
വാറൻ്റിയും പിന്തുണയും
HYCHIKA products are designed and manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your purchase or visit the official HYCHIKA webസൈറ്റ്.
For further assistance, please contact HYCHIKA customer support.





