ആമുഖം
This manual provides detailed instructions for the ROCAM 1018i Loud Digital Alarm Clock. Please read this manual carefully before using the product to ensure proper operation and to maximize its features. Keep this manual for future reference.
Figure 1: ROCAM 1018i Loud Digital Alarm Clock (Black)
പ്രധാന സവിശേഷതകൾ:
- 8.7-inch LED Digital Display with Mirror Effect
- ഡ്യുവൽ അലാറം പ്രവർത്തനം
- Adjustable Brightness (7 levels)
- Adjustable Alarm Volume (7 levels, 92dB to 110dB)
- Snooze Function (9 minutes)
- Includes Bed Shaker for heavy sleepers
- 12/24 മണിക്കൂർ സമയ പ്രദർശനം
- USB ചാർജിംഗ് പോർട്ട് (5V 1A)
- DC Adapter and Backup Battery included
സജ്ജമാക്കുക
1 അൺപാക്കിംഗും പ്രാരംഭ പരിശോധനയും
പാക്കേജിംഗിൽ നിന്ന് എല്ലാ ഘടകങ്ങളും ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്യുക. ഇനിപ്പറയുന്ന ഇനങ്ങൾ ഉണ്ടെന്ന് ഉറപ്പാക്കുക:
- ROCAM 1018i Digital Alarm Clock
- ഡിസി പവർ അഡാപ്റ്റർ
- യുഎസ്ബി ചാർജിംഗ് കേബിൾ
- ബെഡ് ഷേക്കർ (വൈബ്രേറ്റർ)
- ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)
Inspect the clock for any visible damage. If any components are missing or damaged, contact customer support.
2. പവർ കണക്ഷൻ
- Connect the DC power adapter to the power input port on the back of the alarm clock.
- Plug the DC power adapter into a standard electrical outlet. The clock display will illuminate.
- The alarm clock requires continuous power to operate. The included button cell battery serves as a backup to retain time and alarm settings during a power outage, but the display will not be active.
Figure 2: Power connection and USB charging port. The clock requires a DC adapter for operation.
3. Removing Protective Film
A protective film is applied to the mirror surface of the display. Gently peel off this film to reveal a clear mirror surface.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
1. സമയം ക്രമീകരിക്കുന്നു
Refer to the buttons on the back or top of the clock. Typically, there is a "TIME SET" or similar button. Press and hold this button, then use the "+" or "-" buttons to adjust hours and minutes. Press "TIME SET" again to confirm.
To switch between 12-hour and 24-hour (military) time format, locate the "12/24H" button and press it.
Figure 3: The clock supports both 12-hour and 24-hour time display formats.
2. അലാറങ്ങൾ സജ്ജീകരിക്കൽ (ഡ്യുവൽ അലാറം)
ക്ലോക്ക് രണ്ട് സ്വതന്ത്ര അലാറങ്ങളെ പിന്തുണയ്ക്കുന്നു (അലാറം 1 ഉം അലാറം 2 ഉം).
- Press the "ALARM 1" button (or "ALARM 2" for the second alarm). The alarm time will flash.
- Use the "+" or "-" buttons to set the desired alarm hour and minute.
- Press "ALARM 1" (or "ALARM 2") again to confirm the time.
- After setting the time, you can usually select the alarm mode (sound, vibrator, or both) and volume. Refer to the specific buttons for these settings, often labeled "MODE" or "VOL".
Figure 4: The dual alarm feature allows setting two distinct wake-up times.
3. Alarm Modes and Volume
The ROCAM 1018i offers three alarm modes:
- Alarm Sound Only: The clock will emit an audible alarm.
- Bed Shaker Only: The connected bed shaker will vibrate.
- Alarm Sound & Shaker: Both the audible alarm and bed shaker will activate simultaneously.
To select the alarm mode, press the "MODE" button after setting the alarm time. The alarm volume can be adjusted from 92 dB to 110 dB across 7 levels using the "VOL" or "+"/"-" buttons when the alarm is active or in setup mode.
Figure 5: Choose from three alarm modes for personalized wake-up experience. The bed shaker cable is approximately two meters long.
4. സ്നൂസ് ഫംഗ്ഷൻ
When an alarm sounds, press the large "SNOOZE" button located on the top of the clock. The alarm will pause for 9 minutes and then sound again. You can repeat the snooze function multiple times.
Figure 6: The convenient snooze button provides an additional 9 minutes of sleep.
5. ഡിസ്പ്ലേ തെളിച്ചം ക്രമീകരിക്കൽ
The LED display brightness can be adjusted to 7 levels to suit your preference, day or night. Locate the "DIMMER" or "BRIGHTNESS" button (often represented by a sun icon) and press it repeatedly to cycle through the brightness levels.
Figure 7: The display brightness can be adjusted across 7 levels for optimal visibility in any lighting condition.
6. യുഎസ്ബി ചാർജിംഗ് പോർട്ട്
The alarm clock features a 5V 1A USB charging port on the side. You can use this port to charge small electronic devices such as smartphones, smartwatches, or earphones. Connect your device's USB charging cable to this port.
Note: This port is for charging only and does not support data transfer.
മെയിൻ്റനൻസ്
1. വൃത്തിയാക്കൽ
To clean the alarm clock, gently wipe the surface with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, followed by a dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and electronic components.
Ensure the clock is unplugged from the power outlet before cleaning.
2. Battery Replacement (Backup Battery)
The alarm clock uses a Lithium-metal button cell battery (included) for backup power. This battery retains time and alarm settings during a power outage. If the clock consistently loses settings after a power interruption, the backup battery may need replacement. Refer to the battery compartment on the back of the unit for replacement instructions. Use only the specified battery type.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ക്ലോക്ക് ഡിസ്പ്ലേ ഓഫാണ്. | വൈദ്യുതി വിതരണം ഇല്ല. | Ensure the DC power adapter is securely plugged into the clock and a working electrical outlet. |
| അലാറം മുഴങ്ങുന്നില്ല/വൈബ്രേറ്റ് ചെയ്യുന്നില്ല. | Alarm not activated, volume too low, or incorrect mode selected. | Verify alarm is set and enabled. Check alarm volume. Ensure correct alarm mode (sound, shaker, or both) is selected. Check bed shaker connection. |
| പവർ ഓഫാക്കിയ ശേഷം സമയം/ക്രമീകരണങ്ങൾ നഷ്ടപ്പെടും.tage. | Backup battery is depleted or missing. | Replace the Lithium-metal button cell backup battery. Ensure it is correctly installed. |
| യുഎസ്ബി ചാർജിംഗ് പോർട്ട് പ്രവർത്തിക്കുന്നില്ല. | Device not compatible, cable faulty, or clock not powered. | Ensure the clock is powered. Try a different USB cable and device. The port provides 5V 1A. |
| ഡിസ്പ്ലേ വളരെ തെളിച്ചമുള്ളതാണ്/മങ്ങിയതാണ്. | Brightness setting is not optimal. | Press the "DIMMER" or "BRIGHTNESS" button to adjust through the 7 available levels. |
സ്പെസിഫിക്കേഷനുകൾ
| മോഡൽ നമ്പർ | 1018i |
| ബ്രാൻഡ് | ROCAM |
| ഡിസ്പ്ലേ തരം | Digital LED (8.7-inch) |
| നിറം | കറുപ്പ് |
| ഉൽപ്പന്ന അളവുകൾ | Approx. 20.6 cm (W) x 9.2 cm (H) x 3.81 cm (D) |
| ഭാരം | ഏകദേശം 130 ഗ്രാം |
| പവർ ഉറവിടം | DC Adapter (Mains Powered) |
| ബാക്കപ്പ് ബാറ്ററി | 1 x Lithium-metal battery (included) |
| അലാറം വോളിയം | 7 levels, 92 dB to 110 dB |
| തെളിച്ചം പ്രദർശിപ്പിക്കുക | ക്രമീകരിക്കാവുന്ന 7 ലെവലുകൾ |
| USB ഔട്ട്പുട്ട് | 5V 1A |
| പ്രത്യേക സവിശേഷതകൾ | Large screen, Snooze, Dual Alarm, Bed Shaker, USB Charging Port |
വാറൻ്റി വിവരങ്ങൾ
ROCAM offers an 18-month warranty for this product from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
വാറന്റി ക്ലെയിമുകൾക്കായി, നിങ്ങളുടെ വാങ്ങിയതിന്റെ തെളിവ് സൂക്ഷിക്കുക.
ഉപഭോക്തൃ പിന്തുണ
If you have any questions, encounter issues with your ROCAM 1018i Loud Digital Alarm Clock, or require technical assistance, please contact our customer support team.
Contact information for support is typically provided on the product packaging or through the retailer where the product was purchased. Please have your model number (1018i) and purchase details ready when contacting support.
We also offer a 30-day free return policy. For returns, please follow the procedure of your retailer.
