സോവോൾ ഡ്യുവൽ കളർ സിൽക്ക് പിഎൽഎ ഫിലമെന്റ് 1.75 എംഎം യൂസർ മാനുവൽ

1. ആമുഖം

This manual provides comprehensive instructions for the optimal use and maintenance of your Sovol Dual Color Silk PLA Filament. Designed for 3D printing, this 1.75mm co-extruded filament features a unique blend of rose and blue colors, offering a distinct aesthetic to your printed objects. Adhering to these guidelines will help ensure high-quality prints and extend the life of your filament.

പ്രധാന സവിശേഷതകൾ

• Dual Color Co-extrusion: Each section of the filament is composed of two distinct colors (Rose and Blue), allowing for dynamic color shifts in prints, even small ones, by rotating the print orientation.
• Silk Finish: Produces prints with an incredible pearlescent and glossy surface.
• High-Quality Raw Material: Made from imported PLA raw material, ensuring a charming gloss and consistent performance.
• Reliable Printing: Engineered to be jam-free, bubble-free, tangle-free, and to minimize layer lines. Offers excellent first-layer adhesion, reducing warpage, shrinkage, and curling.
• Precise Diameter: Features a stable diameter tolerance of +/- 0.03mm for smoother and more consistent 3D printing.
• പരിസ്ഥിതി സൗഹൃദ പാക്കേജിംഗ്: Utilizes paper spools and cardboard boxes, with vacuum-sealed packaging and desiccant to maintain dryness.

Figure 1: Sovol Dual Color Silk PLA Filament spool and a sample print.

Figure 2: Visual representation of the dual-color effect from different angles.

Figure 3: Key features of Sovol Silk PLA Filament.

2. സജ്ജീകരണവും തയ്യാറെടുപ്പും

Proper preparation of your filament is crucial for successful 3D printing. Follow these steps before beginning your print:

1. Unpack the Filament: Carefully remove the filament spool from its vacuum-sealed packaging. Ensure the desiccant packet is removed and disposed of properly.
2. Inspect the Filament: Check the filament for any visible damage, kinks, or tangles. Ensure the end of the filament is securely tucked into the spool holes to prevent unwinding.
3. Filament Drying: PLA filament can absorb moisture from the air, leading to print quality issues such as stringing, bubbles, and brittle prints. If the filament has been exposed to humid conditions or stored for an extended period, it is recommended to dry it using a dedicated filament dryer. Typical drying parameters for PLA are 40-50°C for 4-6 hours.
4. Load into Printer: Load the filament into your 3D printer according to the manufacturer's instructions for your specific printer model. Ensure the filament feeds smoothly without resistance.

3 ഓപ്പറേറ്റിംഗ് പാരാമീറ്ററുകൾ

The following are general recommended settings for printing with Sovol Dual Color Silk PLA Filament. These parameters may require slight adjustments based on your specific 3D printer model, nozzle type, and desired print quality.

ശുപാർശ ചെയ്യുന്ന പ്രിൻ്റ് ക്രമീകരണങ്ങൾ

Note: Always perform a small test print or calibration cube when using new filament or adjusting settings to achieve optimal results.

Figure 4: Filament diameter accuracy for consistent printing.

4. സംഭരണവും പരിപാലനവും

Proper storage is essential to maintain the quality and performance of your filament. PLA is hygroscopic, meaning it absorbs moisture from the air, which can degrade its printing properties.

സംഭരണ ​​നിർദ്ദേശങ്ങൾ

• ഉണക്കി സൂക്ഷിക്കുക: Always store unused filament in a dry, cool place. The original vacuum-sealed bag with the desiccant packet is ideal for this purpose.
• Airtight Container: If the original packaging is compromised, store the filament in an airtight container or bag with fresh desiccant.
• നേരിട്ടുള്ള സൂര്യപ്രകാശം ഒഴിവാക്കുക: Prolonged exposure to UV light can degrade PLA filament. Store in a dark place or an opaque container.
• താപനില നിയന്ത്രണം: Store at room temperature, away from extreme heat sources or cold.

Figure 5: Recommended packaging for filament storage.

5. പൊതുവായ പ്രശ്‌നങ്ങൾ പരിഹരിക്കുന്നു

Encountering issues during 3D printing can often be resolved by addressing common filament-related problems. Here are some typical issues and their solutions:

• സ്ട്രിംഗിംഗ്/ഊസിംഗ്: This often indicates excessive moisture in the filament or incorrect retraction settings.
  പരിഹാരം: Dry the filament. Adjust retraction distance and speed in your slicer software. Lower nozzle temperature slightly.
• Bubbles/Popping Sounds During Printing: A clear sign of moisture in the filament.
  പരിഹാരം: Immediately dry the filament using a filament dryer.
• Poor Layer Adhesion: Can be caused by low printing temperature, too much cooling, or wet filament.
  പരിഹാരം: Increase nozzle temperature slightly. Reduce cooling fan speed for initial layers. Dry the filament.
• Warping/Lifting from Print Bed: Often due to insufficient bed adhesion or uneven cooling.
  പരിഹാരം: Ensure print bed is clean and level. Increase bed temperature. Use an adhesive (e.g., glue stick) on the print surface. Reduce cooling fan speed for initial layers.
• ക്ലോഗ്ഗിംഗ്: Can result from dust on the filament, heat creep, or wet filament.
  പരിഹാരം: Ensure filament is clean. Check for proper hotend cooling. Dry the filament.
• Brittle Filament: Filament that breaks easily, especially when bending, is usually saturated with moisture.
  പരിഹാരം: Thoroughly dry the filament.

6. ഉൽപ്പന്ന സവിശേഷതകൾ

7. വാറൻ്റിയും പിന്തുണയും

For any questions, concerns, or technical support regarding your Sovol Dual Color Silk PLA Filament, please contact Sovol customer service. Refer to the product packaging or the official Sovol webഏറ്റവും പുതിയ കോൺടാക്റ്റ് വിവരങ്ങൾക്കും വാറന്റി വിശദാംശങ്ങൾക്കുമുള്ള സൈറ്റ്.