HEIMAN WS2SA-1-TY WiFi Smart Photoelectric Smoke Detector User Manual

ആമുഖം

This smart smoke detector utilizes low-power Zigbee wireless network technology. Upon detecting smoke reaching a threshold level, the alarm emits high-decibel sounds with a rapidly flashing red LED indicator, alerting the user and their family promptly. Alarm messages are also sent to the user's application in real-time.

സുരക്ഷാ വിവരങ്ങൾ

• ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനും ഉപയോഗിക്കുന്നതിനും മുമ്പ് എല്ലാ നിർദ്ദേശങ്ങളും ശ്രദ്ധാപൂർവ്വം വായിക്കുക.
• സ്മോക്ക് ഡിറ്റക്ടർ പെയിന്റ് ചെയ്യരുത്. പെയിന്റ് സെൻസിംഗ് ചേമ്പറുകളെ തടസ്സപ്പെടുത്തുകയും അലാറം ശരിയായി പ്രവർത്തിക്കുന്നത് തടയുകയും ചെയ്യും.
• Do not attempt to repair this device. Refer all servicing to qualified personnel.
• ശരിയായ പ്രവർത്തനം ഉറപ്പാക്കാൻ സ്മോക്ക് ഡിറ്റക്ടർ ആഴ്ചതോറും പരിശോധിക്കുക.
• Replace the battery immediately when the low battery warning is indicated.
• ഈ ഉപകരണം ഇൻഡോർ ഉപയോഗത്തിനായി മാത്രം രൂപകൽപ്പന ചെയ്തിട്ടുള്ളതാണ്.

പാക്കേജ് ഉള്ളടക്കം

• Smoke Detector: 1 piece (Note: Product is available in multi-packs, but each unit includes these components)
• മൗണ്ടിംഗ് ബ്രാക്കറ്റ്: 1 കഷണം
• ഉപയോക്തൃ മാനുവൽ: 1 കഷണം
• സ്ക്രൂകൾ: 3 കഷണങ്ങൾ
• Anchor Bolts: 3 pieces
• CR123A Lithium Battery: 1 piece (pre-installed or included)

ഉൽപ്പന്നം കഴിഞ്ഞുview

The HEIMAN WS2SA-1-TY is a smart photoelectric smoke detector designed for reliable fire safety. It features a compact, circular design and integrates with smart home systems via WiFi and Bluetooth for real-time notifications.

Figure 1: HEIMAN WS2SA-1-TY Smoke Detectors and App Interface. This image shows a multi-pack of the smoke detectors along with a smartphone screen displaying a smoke alarm notification within the companion application.

ചിത്രം 2: ഉൽപ്പന്ന സവിശേഷതകൾ കഴിഞ്ഞുview. This image highlights the compatibility of the smoke detector with Tuya smart home platforms, its WiFi connectivity, and EN14604 certification, indicating compliance with European safety standards.

പ്രധാന സവിശേഷതകൾ:

• നീണ്ട ബാറ്ററി ലൈഫ്: Equipped with a CR123A lithium battery, offering up to 5 years of operation.
• ഉച്ചത്തിലുള്ള അലാറം: Produces an 85dB alarm sound (at 3 meters) to alert occupants effectively.
• വിഷ്വൽ ഇൻഡിക്കേറ്റർ: ഒരു എൽഇഡി എൽamp flashes approximately every 53 seconds to confirm the detector is powered on and functioning.
• Acoustic and Optical Alarm: When smoke is detected, a red light flashes rapidly, and the buzzer sounds with quick beeps.
• സ്മാർട്ട് കണക്റ്റിവിറ്റി: Integrates with a mobile application for real-time notifications and alarm silencing.

സജ്ജമാക്കുക

1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

The smoke detector uses one CR123A lithium battery. Ensure the battery is correctly inserted according to the polarity markings inside the battery compartment. The battery is typically pre-installed or included in the package.

Figure 3: Battery Compartment and Battery Life. This image displays the underside of the smoke detector, indicating where the replaceable CR123A 3V battery is located, which provides approximately 5 years of battery life.

2. മൗണ്ടിംഗ് ലൊക്കേഷൻ

Choose a central location on the ceiling, away from corners, vents, and sources of steam or smoke (e.g., kitchen, bathroom). Avoid placing it in dead air spaces. For optimal coverage, ensure the detector is within 20-50 square meters of the area to be monitored.

3. ഇൻസ്റ്റലേഷൻ

1. Attach the mounting bracket to the desired ceiling location using the provided screws and anchor bolts.
2. Align the smoke detector with the mounting bracket and twist it clockwise until it clicks securely into place.
3. After installation, the LED indicator should flash approximately every 53 seconds, confirming the device is active.

4. App Pairing and Network Connection

The detector connects via WiFi and Bluetooth for fast setup and real-time notifications through a compatible smart home application (e.g., Tuya Smart app).

1. Download and install the recommended smart home application (e.g., Tuya Smart) on your iOS or Android device.
2. ആപ്പ് തുറന്ന് ഒരു അക്കൗണ്ട് സൃഷ്ടിക്കുക അല്ലെങ്കിൽ ലോഗിൻ ചെയ്യുക.
3. Follow the in-app instructions to add a new device. The app will typically guide you through connecting the smoke detector to your home WiFi network using Bluetooth for initial pairing.
4. Ensure your smartphone is close to the smoke detector and your WiFi network is active during the pairing process.

Figure 4: Fast Connection via WiFi + Bluetooth. This image shows the smoke detector installed on a ceiling and a hand holding a smartphone, demonstrating the quick pairing process using both WiFi and Bluetooth networking.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

സാധാരണ പ്രവർത്തനം

During normal operation, the LED indicator will flash approximately every 53 seconds, signifying that the detector is powered on and monitoring for smoke.

അലാറം അവസ്ഥ

When smoke is detected and reaches the alarm threshold, the device will activate both an acoustic and optical alarm:

• The built-in buzzer will emit a loud, rapid beeping sound (85dB at 3 meters).
• ചുവന്ന LED ഇൻഡിക്കേറ്റർ വേഗത്തിൽ മിന്നിമറയും.
• A real-time alarm notification will be sent to your paired smartphone application.

Figure 5: Alarm Activation. This image illustrates the smoke detector's rapid response to smoke, activating an 85dB alarm to alert occupants to potential danger.

Silencing the Alarm via App

In case of a false alarm or after addressing the smoke source, you can silence the alarm directly from your smartphone application.

1. Open the smart home application on your smartphone.
2. Navigate to the smoke detector's device page.
3. Look for an option to "Silence Alarm" or "Mute". Confirm the action within the app.

Figure 6: Real-Time Notification and App Control. This image shows the smoke detector in a home setting, with a smartphone displaying a real-time smoke alarm notification and the ability to silence the alarm through the application.

കുറഞ്ഞ ബാറ്ററി മുന്നറിയിപ്പ്

When the battery level is low, the detector will provide a warning. This typically involves a distinct chirp sound and/or a specific LED flash pattern, along with a notification to your smartphone app. Replace the battery immediately upon receiving this warning.

മെയിൻ്റനൻസ്

ഡിറ്റക്ടർ പരിശോധിക്കുന്നു

Test your smoke detector weekly to ensure it is functioning correctly. Press and hold the test button on the device until the alarm sounds. The alarm should be loud and clear. If the alarm does not sound, refer to the Troubleshooting section.

ഡിറ്റക്ടർ വൃത്തിയാക്കുന്നു

Dust and debris can accumulate on the smoke detector, potentially affecting its performance. Clean the detector at least once a month:

• ഒരു മൃദുവായ ബ്രഷ് അറ്റാച്ച്മെന്റ് ഉപയോഗിച്ച് ഡിറ്റക്ടറിന്റെ പുറംഭാഗം സൌമ്യമായി വാക്വം ചെയ്യുക.
• പുറംഭാഗം വൃത്തിയാക്കുക, ഡിamp cloth. Do not use cleaning solvents or chemicals.
• ഡിറ്റക്ടറിന്റെ സി തുറക്കരുത്asinവൃത്തിയാക്കുന്നതിന് ഗ്രാം.

ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

The CR123A lithium battery has an estimated life of 5 years. Replace the battery immediately when the low battery warning is indicated.

1. Twist the smoke detector counter-clockwise to remove it from its mounting bracket.
2. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് തുറക്കുക.
3. Remove the old CR123A battery and dispose of it according to local regulations.
4. Insert a new CR123A lithium battery, ensuring correct polarity.
5. Close the battery compartment and reattach the detector to its mounting bracket by twisting clockwise until secure.
6. Test the detector after battery replacement.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

Figure 7: Product Dimensions. This diagram illustrates the compact size of the smoke detector, with a diameter of 86mm and a height of 34.5mm.

വാറൻ്റിയും പിന്തുണയും

For warranty information, technical support, or service inquiries, please contact HEIMAN customer support through their official website or the contact information provided with your purchase. Please have your model number (WS2SA-1-TY) and purchase date available when contacting support.