Hunter Pro-C P2C-400 Irrigation Controller User Manual

1. ആമുഖം

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Hunter Pro-C P2C-400 Indoor/Outdoor Modular Controller. Designed for efficient irrigation management, this controller offers advanced features for precise watering schedules.

Image: Hunter Pro-C P2C-400 Controller with its main display and control dial, alongside an expansion module. The display shows "10:11 AM" and various programming options are visible around the dial.

2 പ്രധാന സവിശേഷതകൾ

• മോഡുലാർ ഡിസൈൻ: Base 4-station unit expandable up to 32 stations with optional expansion modules. This specific model comes with 16 stations.
• എളുപ്പത്തിൽ മെമ്മറി വീണ്ടെടുക്കൽ: A manual backup utility that stores complete controller scheduling and setup information.
• ഓട്ടോമാറ്റിക് ഷോർട്ട് സർക്യൂട്ട് സംരക്ഷണം: Detects electrical faults, skipping only affected stations to allow others to water normally.
• QuickCheck: Displays an "ERR" message when a field wiring short is detected on a specific station number, aiding in troubleshooting.
• സീസണൽ ക്രമീകരണം: Allows quick adjustment to irrigation run times based on current weather conditions. Can be global or automatic with Solar Sync.
• സ്റ്റേഷനുകൾക്കിടയിലുള്ള കാലതാമസം: Programmable delay between stations (from seconds to longer periods) to allow for valve closing or pressure tank recharge.
• Sensor Programmability: Ability to specify which programs are shut down in response to a sensor alarm, allowing unaffected programs to continue.
• Non-Water Days: Program specific days of the week as OFF to prevent watering, regardless of interval schedules.
• Large, Backlit Display: Ensures simple programming and manual operation in various lighting conditions.
• Dual Sensor Inputs: Standard inputs for use with Hunter Clik or Solar Sync Sensors.
• വഴക്കമുള്ള ശക്തി: Pre-wired with a power cord and plug for easy indoor/outdoor installation. The power cord can be removed for hardwired setups.
• SmartPort Wiring Harness: Facilitates quick connection to ROAM and ROAM XL Remotes.
• ഒന്നിലധികം പ്രോഗ്രാമുകൾ: Three independent irrigation programs, each with four start times, for customized scheduling.
• Hybrid EZ Decoder Option: Supports up to 32 total stations (28 maximum if two-wire only) with a separately sold decoder.

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

3.1 കൺട്രോളർ മൌണ്ട് ചെയ്യുന്നു

The Hunter Pro-C P2C-400 controller is designed for both indoor and outdoor use. Select a suitable location that is protected from direct sunlight and extreme weather conditions if possible. Ensure easy access for programming and maintenance.

3.2 പവർ കണക്ഷൻ

The controller comes pre-wired with a power cord and plug for convenient installation. For hardwired installations, the power cord can be removed. Always ensure power is disconnected before performing any wiring.

3.3 Wiring Stations and Sensors

Connect your irrigation valves to the appropriate station terminals. The controller supports conventional wiring from 4 to 23 stations. Utilize the two standard sensor inputs for Hunter Clik or Solar Sync Sensors as needed. Refer to the wiring diagram inside the controller's cover for detailed connections.

For modular expansion, insert additional station modules into the designated slots. Ensure modules are securely seated.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Hunter Pro-C P2C-400 features a user-friendly dial and button interface for programming and manual operation.

4.1 Setting Current Date and Time

1. Turn the dial to "SET CURRENT DATE / TIME".
2. അമ്പടയാള ബട്ടണുകൾ ഉപയോഗിക്കുക (+ / -) to adjust the values (year, month, day, hour, minute).
3. Use the right arrow button to move between settings.

4.2 Programming Irrigation Schedules

The controller supports three independent programs (A, B, C). Each program can have up to four start times.

1. Turn the dial to "SET PROGRAM START TIMES". Select the program (A, B, or C) using the PRG button. Adjust start times using the arrow buttons.
2. Turn the dial to "SET STATION RUN TIMES". Select the program and station. Adjust the run time for each station using the arrow buttons.
3. Turn the dial to "SET DAYS TO WATER". Select the program. Choose your watering days (e.g., specific days of the week, odd/even days, or interval watering) using the arrow buttons.

4.3 മാനുവൽ പ്രവർത്തനം

For immediate watering or testing:

• Manual - All Stations: Turn the dial to "MANUAL - ALL STATIONS" to manually run all programmed stations.
• Manual - Single Station: Turn the dial to "MANUAL - SINGLE STATION" to select and run a specific station.
• Press the "MANUAL START / PRESS & HOLD" button to initiate manual watering.

4.4 System Off

To halt all automatic irrigation, turn the dial to "SYSTEM OFF". The green indicator light will turn off.

4.5 പമ്പ് പ്രവർത്തനം

If your system includes a pump, turn the dial to "SET PUMP OPERATION" to configure its activation with irrigation cycles.

4.6 Seasonal Adjustment

Adjust the overall watering duration by turning the dial to "SEASONAL ADJUST". Use the arrow buttons to increase or decrease the percentage of programmed run times. This feature helps conserve water during cooler months or increase watering during hotter periods.

5. പരിപാലനം

Regular maintenance ensures the longevity and optimal performance of your Hunter Pro-C controller.

• വൃത്തിയാക്കൽ: Periodically wipe the controller's exterior with a soft, damp തുണി. ഉരച്ചിലുകൾ ഉണ്ടാക്കുന്ന ക്ലീനറുകളോ ലായകങ്ങളോ ഒഴിവാക്കുക.
• പരിശോധന: Check wiring connections annually for corrosion or loose terminals. Ensure the enclosure is sealed to prevent moisture ingress.
• ബാറ്ററി ബാക്കപ്പ്: While the controller has Easy Retrieve Memory, ensure any internal backup batteries (if applicable to your specific model revision) are checked and replaced as per manufacturer recommendations to maintain time and date during power outages.
• സെൻസർ പരിശോധന: If using rain or soil sensors, periodically check their functionality and cleanliness.

6. പ്രശ്‌നപരിഹാരം

ഈ വിഭാഗം പൊതുവായ പ്രശ്നങ്ങളും അവയുടെ പരിഹാരങ്ങളും അഭിസംബോധന ചെയ്യുന്നു.

7 സ്പെസിഫിക്കേഷനുകൾ

• മോഡൽ: P2C-400 With 16 Zones (Base 4 Station Plus one 3 Station & 9 Station Module)
• ബ്രാൻഡ്: SPW (Hunter)
• വിപുലീകരണക്ഷമത: Conventional wiring from 4 to 23 stations; Hybrid EZ Decoder option up to 32 total stations (28 max if two-wire only).
• പ്രോഗ്രാമുകൾ: 3 independent irrigation programs (A, B, C)
• ആരംഭ സമയം: ഓരോ പ്രോഗ്രാമിനും 4 ആരംഭ സമയം
• സെൻസർ ഇൻപുട്ടുകൾ: 2 (compatible with Hunter Clik or Solar Sync Sensors)
• മാസ്റ്റർ വാൽവ്/പമ്പ് സ്റ്റാർട്ട്: 1 P/MV output
• ഡിസ്പ്ലേ തരം: എൽസിഡി, ബാക്ക്‌ലിറ്റ്
• ശക്തി: Pre-wired with power cord and plug (removable for hardwired installation)
• വാല്യംtage: 12 വോൾട്ട് (DC)
• ഇനത്തിൻ്റെ ഭാരം: 7.41 പൗണ്ട്
• പാക്കേജ് അളവുകൾ: 10.67 x 10.35 x 4.69 ഇഞ്ച്
• UPC: 746178856260

8. വാറൻ്റിയും പിന്തുണയും

For specific warranty information and technical support, please refer to the documentation included with your product or visit the official Hunter Industries website. Ensure you have your product model number (P2C-400) and serial number (if applicable) ready when contacting support.

For additional resources and frequently asked questions, you may also visit the ആമസോണിലെ ഉൽപ്പന്ന പേജ്.