Domus Line 2011619

Domus Line Recessed Housing for Call Me Remote Control

മോഡൽ: 2011619

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Domus Line Recessed Housing Kit is an essential accessory designed for the 'Call Me' remote control. This kit provides a clean and integrated solution for installing both round and square 'Call Me' remote controls flush with a surface, ensuring a seamless aesthetic. It is crafted from durable plastic with a stainless steel effect finish, blending well with various interior designs.

Domus Line Recessed Housing Kit, showing both round and square components.

This image displays the two components of the Domus Line recessed housing kit: one round housing and one square housing, both in a stainless steel effect finish.

ഫീച്ചറുകൾ

പാക്കേജ് ഉള്ളടക്കം

The Domus Line Recessed Housing Kit includes the following components:

സ്പെസിഫിക്കേഷനുകൾ

ബ്രാൻഡ്Domus Line
നിർമ്മാതാവ്ഡോമസ് ലൈൻ
മോഡൽ നമ്പർ2011619
ASINB0C4V26LTJ
ഉൽപ്പന്ന അളവുകൾ (L x W x H)4.5 x 3.2 x 1.8 cm (45L x 32W x 18H millimeters)
ഇനത്തിൻ്റെ ഭാരം2 കിലോഗ്രാം
നിറംസ്റ്റെയിൻലെസ്സ് സ്റ്റീൽ പ്രഭാവം
മെറ്റീരിയൽപ്ലാസ്റ്റിക്, സ്റ്റെയിൻലെസ്സ് സ്റ്റീൽ
ശൈലിസജ്ജമാക്കുക
ഇനങ്ങളുടെ എണ്ണം1 (kit containing two housings)
നിയന്ത്രണ രീതിRemote Control (for the device it houses)
പവർ ഉറവിടംElectric Cable (for the device it houses)
മാതൃരാജ്യംജർമ്മനി

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

This section provides instructions for properly installing the Domus Line Recessed Housing.

  1. ലൊക്കേഷൻ തിരഞ്ഞെടുക്കുക: Select a suitable flat surface for installation, ensuring there is sufficient depth behind the surface for the housing (minimum 14 mm recess depth).
  2. തുറക്കൽ തയ്യാറാക്കുക: Using appropriate tools, create a circular opening with a diameter of 40 മി.മീ (1.57 inches) in the chosen surface. Ensure the cut is clean and precise for a snug fit.
  3. ഹൗസിംഗ് ചേർക്കുക: Gently push the desired recessed housing (round or square) into the prepared opening until its outer flange sits flush with the surface. The housing is designed to be held in place by friction.
  4. Insert Remote Control: Once the housing is securely in place, insert your 'Call Me' remote control into the housing. Ensure it fits snugly and is oriented correctly.
Technical drawing of the square recessed housing with dimensions.

This technical drawing illustrates the dimensions of the square recessed housing. Key measurements include a 46mm side length for the outer frame and a 40mm mounting diameter for the circular opening.

Technical drawing of the round recessed housing with dimensions.

This technical drawing illustrates the dimensions of the round recessed housing. Key measurements include a 46mm outer diameter and a 40mm mounting diameter for the inner opening.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Domus Line Recessed Housing is a passive component designed to hold a 'Call Me' remote control. It does not require any active operation itself. Once the remote control is placed within the housing, operate the remote control as per its own manufacturer's instructions.

മെയിൻ്റനൻസ്

To ensure the longevity and appearance of your recessed housing:

ട്രബിൾഷൂട്ടിംഗ്

This section addresses common issues you might encounter during installation or use.

വാറൻ്റിയും പിന്തുണയും

For information regarding warranty coverage, technical support, or replacement parts, please contact Domus Line customer service directly. Refer to the product packaging or the official Domus Line webബന്ധപ്പെടാനുള്ള വിശദാംശങ്ങൾക്കുള്ള സൈറ്റ്.

You may also refer to the product listing on Amazon.com.be for additional support information or to contact the seller.

Online Resource: Product Page on Amazon.com.be

അനുബന്ധ രേഖകൾ - 2011619

പ്രീview Domus Line CALL-ME V17 TW RF Remote Control and Receiver Installation Guide
Comprehensive installation guide for the Domus Line CALL-ME V17 TW RF remote control and the associated RECEIVER CONTROLLER TW, covering setup, programming, operation, battery replacement, and safety precautions.
പ്രീview Domus Line CALL ME / CALL ME XD (XDM) Wireless Lighting Control System Instructions
Installation and pairing guide for the Domus Line CALL ME and CALL ME XD (XDM) wireless lighting control systems, including receiver modules and remote controls. Provides details on power requirements, connection, pairing procedures, and dimmer functionality.
പ്രീview ഡോമസ് ലൈൻ എക്സ്-ഡ്രൈവർ ഇൻസ്റ്റലേഷൻ മാനുവലും സ്പെസിഫിക്കേഷനുകളും
ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ, സാങ്കേതിക സവിശേഷതകൾ, ഓപ്ഷണൽ ആക്‌സസറികൾ എന്നിവയുൾപ്പെടെ ഡോമസ് ലൈൻ എക്സ്-ഡ്രൈവറിലേക്കുള്ള സമഗ്ര ഗൈഡ്. സവിശേഷതകൾ, പ്രവർത്തനം, അനുസരണ വിവരങ്ങൾ എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview ഡോമസ് ലൈൻ MIDI BK റീസെസ്ഡ് സ്പോട്ട്‌ലൈറ്റ് ഇൻസ്റ്റാളേഷനും മെയിന്റനൻസ് ഗൈഡും
ഡോമസ് ലൈൻ മിഡി ബികെ റീസെസ്ഡ് സ്പോട്ട്‌ലൈറ്റിനായുള്ള സമഗ്രമായ ഇൻസ്റ്റാളേഷനും ബൾബ് മാറ്റിസ്ഥാപിക്കൽ ഗൈഡും, സുരക്ഷാ നിർദ്ദേശങ്ങൾ, സാങ്കേതിക സവിശേഷതകൾ, ഡയഗ്രമുകൾ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു. 10W, 20W G4 12V ഹാലൊജൻ l എന്നിവയ്ക്ക് അനുയോജ്യം.amps.
പ്രീview DOMUS LINE O-LINE LED Lighting System Installation Guide
Comprehensive installation guide for the DOMUS LINE O-LINE and O-LINE (D-M) LED lighting systems, detailing mounting procedures, electrical connections, and safety information.
പ്രീview ഡോമസ് ലൈൻ RC3 മൾട്ടി-ചാനൽ റിമോട്ട് കൺട്രോൾ ഉപയോക്തൃ ഗൈഡ്
എൽഇഡി ലൈറ്റിംഗിനായി ഡോമസ് ലൈൻ ആർസി3 മൾട്ടി-ചാനൽ റിമോട്ട് കൺട്രോൾ ഉപയോഗിക്കുന്നതിനുള്ള സമഗ്രമായ ഗൈഡ്, സജ്ജീകരണം, എക്സ്-ഡ്രൈവർ, സിഎം2-എക്സ്ഡി, കോൾ മി റിസീവർ, മാജിക് ട്യൂൺ റിസീവർ എന്നിവയുമായി ജോടിയാക്കൽ, ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ എന്നിവ ഉൾപ്പെടുന്നു.