TOPXCDZ LED Constant Current Driver (3-5W, 300mA) Instruction Manual

1. ആമുഖം

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your TOPXCDZ LED Constant Current Driver, specifically the 3-5W, 300mA model. Please read these instructions thoroughly before use to ensure proper functionality and to prevent damage or injury.

2 സുരക്ഷാ വിവരങ്ങൾ

Adherence to the following safety guidelines is crucial for preventing electrical hazards and ensuring the longevity of the product.

Danger! No-load testing is strictly forbidden. Testing the driver without a connected LED load can result in inaccurate data and potential damage to the unit. Always connect to a suitable LED bulb or array for testing.
ഇൻപുട്ട് വോളിയം ഉറപ്പാക്കുകtage (AC85-265V) matches your power supply.
Do not exceed the specified output wattage (3-5W) or current (300mA) for the connected LED load.
Installation should be performed by qualified personnel to avoid electrical shock or fire hazards.
Disconnect power before installation, maintenance, or troubleshooting.
This driver features overvoltage protection, overload protection, overheat protection, and short circuit protection. However, proper installation and usage are still required.
Keep the driver away from moisture and extreme temperatures.

3. ഉൽപ്പന്ന സവിശേഷതകൾ

The TOPXCDZ LED Constant Current Driver (3-5W, 300mA) is designed to provide stable power to compatible LED lighting. Key specifications are detailed below:

TOPXCDZ 3-5W 300mA LED Driver front view with specifications printed on label

ചിത്രം 1: മുൻഭാഗം view of the TOPXCDZ 3-5W 300mA LED Driver, showing input/output labels and model information.

Model: 3-5W 300mA LED Driver
പരാമീറ്റർ	മൂല്യം
ഇൻപുട്ട് വോളിയംtage	എസി 85-265V
Putട്ട്പുട്ട് വോളിയംtage (AC230V load test)	ഡിസി ക്സനുമ്ക്സ-ക്സനുമ്ക്സവ്
ഔട്ട്പുട്ട് കറൻ്റ്	300mA
ഔട്ട്പുട്ട് പവർ	3-5W
അളവുകൾ (LWH)	64 മിമി * 30 മിമി * 20 മിമി
സംരക്ഷണ സവിശേഷതകൾ	ഓവർ വോൾtage, Overload, Overheat, Short Circuit
ഫ്ലിക്കർ	ഫ്ലിക്കർ ഇല്ല

4. ഇൻസ്റ്റാളേഷൻ ഗൈഡ്

Proper installation is critical for the safe and effective operation of the LED driver. Ensure power is disconnected before beginning installation.

TOPXCDZ LED Driver with AC input and DC output wires clearly visible

ചിത്രം 2: വശം view of the LED Driver showing the AC input wires (AC-L, AC-N) and DC output wires (LED+, LED-).

വൈദ്യുതി വിച്ഛേദിക്കൽ: Turn off the main power supply to the circuit where the LED driver will be installed. Verify power is off using a voltagഇ ടെസ്റ്റർ.
വയറുകൾ തിരിച്ചറിയുക: The LED driver has two sets of wires:
- Input Wires (AC): Typically marked AC-L (Live) and AC-N (Neutral). These connect to your main AC power supply (85-265V).
- Output Wires (DC): Typically marked LED+ (Positive) and LED- (Negative). These connect to your LED light fixture.
Connect AC Input: Connect the AC-L wire from the driver to the Live wire of your AC power supply. Connect the AC-N wire from the driver to the Neutral wire of your AC power supply. Ensure connections are secure and insulated.
Connect DC Output: Connect the LED+ wire from the driver to the positive terminal of your LED light fixture. Connect the LED- wire from the driver to the negative terminal of your LED light fixture. Observe correct polarity.
സുരക്ഷിത ഇൻസ്റ്റാളേഷൻ: Mount the LED driver in a suitable, well-ventilated location, away from direct heat or moisture. Ensure it is securely fastened and that all wiring is protected.
വൈദ്യുതി പുനഃസ്ഥാപിക്കൽ: Once all connections are secure and verified, restore power to the circuit.

5. ഓപ്പറേഷൻ

The TOPXCDZ LED Constant Current Driver operates automatically once properly installed and powered. It is designed to provide a stable 300mA current to the connected LED load within its specified voltage range (9-18V DC for 3-5W models).

The driver will automatically adjust its output voltage to maintain the constant current required by the LED lamp പ്രകടനം.
No user intervention is required for normal operation.

6. പരിപാലനം

The LED driver is designed for minimal maintenance. Regular checks can help ensure optimal performance and longevity.

വൃത്തിയാക്കൽ: Periodically inspect the driver for dust accumulation. If necessary, gently clean the exterior with a dry, soft cloth. Ensure power is disconnected before cleaning.
പരിശോധന: Annually inspect wiring for any signs of wear, damage, or loose connections. Address any issues promptly.
പരിസ്ഥിതി: പ്രവർത്തന അന്തരീക്ഷം നിശ്ചിത താപനിലയിലും ഈർപ്പത്തിലും പരിധിക്കുള്ളിൽ തുടരുന്നുവെന്ന് ഉറപ്പാക്കുക.

7. പ്രശ്‌നപരിഹാരം

If you encounter issues with your LED driver, refer to the following troubleshooting steps:

പ്രശ്നം	സാധ്യമായ കാരണം	പരിഹാരം
LED- കൾ പ്രകാശിക്കുന്നില്ല	No power to the driver. Incorrect wiring (AC input or DC output). LED load is faulty or incompatible. Driver is faulty.	പവർ സപ്ലൈയും സർക്യൂട്ട് ബ്രേക്കറും പരിശോധിക്കുക. Verify all wiring connections (AC-L, AC-N, LED+, LED-). Ensure correct polarity. Test the LED fixture with a known good driver or power supply. If all else fails, the driver may need replacement.
LED-കൾ മിന്നുന്നു അല്ലെങ്കിൽ മങ്ങുന്നു	അയഞ്ഞ കണക്ഷനുകൾ. Incompatible LED load (e.g., wattage too high/low). ഇൻപുട്ട് വോളിയംtagഇ ഏറ്റക്കുറച്ചിലുകൾ.	എല്ലാ വയറിംഗ് കണക്ഷനുകളും പരിശോധിച്ച് സുരക്ഷിതമാക്കുക. Ensure the LED load is within the 3-5W range and requires 300mA. Verify stable AC input voltage.
Driver is hot to touch	മോശം വെന്റിലേഷൻ. Overloaded LED fixture. Operating in high ambient temperature.	Ensure adequate airflow around the driver. Verify the LED load does not exceed 5W. Relocate the driver to a cooler environment if possible.

പ്രധാന കുറിപ്പ്: Remember that no-load testing is forbidden. Always connect a compatible LED load before applying power to the driver for testing or operation.

8. വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please contact TOPXCDZ customer service through the retailer where the product was purchased. Please have your purchase details and product model number (3-5W 300mA) available when contacting support.

While specific warranty terms are not detailed here, TOPXCDZ products are generally covered against manufacturing defects. Misuse, improper installation, or unauthorized modifications will void any applicable warranty.

	LTSYS SE-20-300-650-G1T Intelligent LED Driver: Features, Specs, and Installation Detailed technical specifications, features, wiring diagrams, installation guide, and warranty information for the LTSYS SE-20-300-650-G1T Constant Current Intelligent LED Driver with Triac/ELV dimming.
	MEAN WELL LPF-25D Series: 25W Constant Current LED Driver \| IP67, 3-in-1 Dimming Explore the MEAN WELL LPF-25D series, a 25W AC/DC constant current LED driver designed for efficient and reliable LED lighting. Features include IP67 ingress protection, 3-in-1 dimming, wide input voltage range (90-305VAC), and operation across a broad temperature range (-35°C to +70°C case temperature). Ideal for LED panel lighting, downlights, and moving signs.
	MEAN WELL HBG-240 Series 240W Constant Voltage + കോൺസ്റ്റന്റ് കറന്റ് LED ഡ്രൈവർ ഡാറ്റാഷീറ്റ് Comprehensive technical datasheet for the MEAN WELL HBG-240 series 240W LED driver. Details include specifications, features, dimming options (3-in-1, DALI), performance graphs, mechanical dimensions, and installation guidance for indoor and outdoor applications.
	PE294R സീരീസ് ട്രയാക് ഡിമ്മിംഗ് LED ഡ്രൈവർ ഡാറ്റാഷീറ്റ് \| സ്ഥിരമായ കറന്റ്, 3-12W ഷെൻ‌ഷെൻ സ്റ്റാർ‌വെൽ ടെക്നോളജിയുടെ PE294R സീരീസ് കോൺസ്റ്റന്റ് കറന്റ് ട്രയാക്ക് ഡിമ്മബിൾ LED ഡ്രൈവറുകൾക്കായുള്ള വിശദമായ ഡാറ്റാഷീറ്റ്. സവിശേഷതകളിൽ 2-100% ഡിമ്മിംഗ് റേഞ്ച്, ആക്റ്റീവ് PFC, മൾട്ടിപ്പിൾ പ്രൊട്ടക്ഷൻ സർക്യൂട്ടുകൾ എന്നിവ ഉൾപ്പെടുന്നു. സ്പെസിഫിക്കേഷനുകൾ, വയറിംഗ് ഡയഗ്രമുകൾ, അനുയോജ്യതാ വിവരങ്ങൾ എന്നിവ ഉൾപ്പെടുത്തിയിട്ടുണ്ട്.
	Small Transformer User Manual - Safety, Specifications, and Standards User manual for a small transformer, detailing product description, limitations, applicable standards (EN 61558), and critical safety warnings regarding electric shock and fire hazards.
	Inventronics NES-1K8TxxxBC: 1800W 3-Channel Programmable IP66 LED Driver Datasheet Datasheet for the Inventronics NES-1K8TxxxBC, an 1800W, 3-channel, programmable IP66 LED driver with DALI-2 and DMX-RDM dimming, high efficiency, and comprehensive protection features for various lighting applications.

TOPXCDZ 3-5W 300mA