ബെഹ്രിംഗർ സെനിക്സ് X1003B പ്രീമിയം അനലോഗ് മിക്സർ യൂസർ മാനുവൽ

1. ആമുഖം

The Behringer Xenyx X1003B is a compact and comprehensive 10-channel analog mixer designed for various audio applications, including podcasting, streaming, and home studio use. It features five phantom-power-enabled XLR inputs with XENYX preamps and a dedicated stereo line input channel with streaming outputs. This mixer offers versatile power options, including 9-volt battery operation for portable use.

ചിത്രം 1: മുൻഭാഗം view of the Behringer Xenyx X1003B Premium Analog Mixer, showcasing its input section, channel strips with gain, EQ, and fader controls, and master section.

2. സജ്ജീകരണം

2.1 Powering the Mixer

The Xenyx X1003B mixer can be powered via a standard 110V AC wall outlet or through 9-volt batteries for portable operation.

2.1.1 എസി പവർ കണക്ഷൻ

Connect the provided power adapter to the mixer's power input and then to a suitable AC power outlet. Ensure the power supply matches the voltage requirements of your region.

2.1.2 ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

For battery operation, the mixer requires three 9-volt batteries. Access the battery compartment, typically located on the underside of the unit. You may need a small Phillips head screwdriver to open the compartment. Insert the batteries, ensuring correct polarity, and secure the cover. Two of the 9-volt batteries provide the main power, while the third is stepped up to enable 48V phantom power.

Figure 2: Underside of the mixer, indicating the battery compartment for 9-volt battery installation.

2.2 ഇൻപുട്ട് കണക്ഷനുകൾ

The X1003B offers various input options:

• XLR Inputs (Mic 1-8): Connect microphones using XLR cables. These inputs feature XENYX preamps and can supply 48V phantom power for condenser microphones.
• ലൈൻ ഇൻപുട്ടുകൾ (1/4" ടിആർഎസ്): Connect line-level instruments or devices. Channels 1-2 have dedicated line inputs, while channels 3/4, 5/6, and 7/8 share inputs with the XLR channels.
• Stereo Line Input (IN 9/10 - RCA): A dedicated stereo RCA input for connecting devices like media players or streaming sources.

3. മിക്സർ പ്രവർത്തിപ്പിക്കുക

3.1 ചാനൽ നിയന്ത്രണങ്ങൾ

Each channel strip provides controls for adjusting the audio signal:

• ഗെയിൻ: മൈക്രോഫോണുകൾക്കോ ​​ലൈൻ-ലെവൽ സിഗ്നലുകൾക്കോ ​​വേണ്ടിയുള്ള ഇൻപുട്ട് സെൻസിറ്റിവിറ്റി ക്രമീകരിക്കുന്നു.
• EQ (ഉയർന്ന, മിഡ്, ലോ): Three-band equalizer for tone shaping. Adjust these knobs to boost or cut frequencies in the high, mid, and low ranges.
• MON SEND: Controls the level of the signal sent to the monitor output.
• FX അയയ്ക്കുക: Controls the level of the signal sent to the effects processor (if connected).
• പാൻ/ബാൽ: Adjusts the stereo position (pan for mono channels, balance for stereo channels).
• ചാനൽ ഫേഡർ: Controls the overall output level of the individual channel.

3.2 മാസ്റ്റർ വിഭാഗം

The master section provides overall control and output options:

• മെയിൻ ഔട്ട് (1/4" ടിആർഎസ്): പവറുമായി ബന്ധിപ്പിക്കുന്നതിനുള്ള പ്രധാന സ്റ്റീരിയോ ഔട്ട്പുട്ട് ampലൈഫറുകൾ അല്ലെങ്കിൽ പവർ സ്പീക്കറുകൾ.
• ഫോണുകൾ (1/4" ടിആർഎസ്): Headphone output with a dedicated level control.
• REC/STREAM OUT (RCA): Stereo RCA outputs for recording or streaming your mix.
• PHANTOM Power Switch: Activates 48V phantom power for condenser microphones connected to the XLR inputs. The LED indicator will illuminate when active.
• ലെവൽ മീറ്ററുകൾ: LED indicators display the output level of the main mix, helping to prevent clipping.

4. പരിപാലനം

To ensure the longevity and optimal performance of your Behringer Xenyx X1003B mixer, follow these general maintenance guidelines:

• വൃത്തിയാക്കൽ: Regularly wipe the mixer's surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or controls.
• വെൻ്റിലേഷൻ: Ensure proper airflow around the unit to prevent overheating. Do not block ventilation openings.
• സംഭരണം: When not in use, store the mixer in a cool, dry place away from direct sunlight, extreme temperatures, and excessive dust or moisture.
• കേബിൾ മാനേജുമെന്റ്: Use proper cable management to prevent strain on connectors and accidental disconnections.
• ബാറ്ററി കെയർ: If using batteries, remove them if the mixer will not be used for an extended period to prevent leakage and damage.

5. പ്രശ്‌നപരിഹാരം

If you encounter issues with your Xenyx X1003B mixer, consider the following common troubleshooting steps:

• ശക്തിയില്ല: Check the power adapter connection and the power outlet. If using batteries, ensure they are correctly installed and have sufficient charge.
• ശബ്ദമില്ല: Verify all cable connections (inputs, outputs, speakers). Check channel faders, master fader, and gain controls are set appropriately. Ensure phantom power is enabled for condenser microphones.
• വികലമായ ശബ്ദം: Reduce input gain or channel fader levels to prevent clipping (indicated by the CLIP LED). Check for impedance mismatches with connected devices.
• ഹം അല്ലെങ്കിൽ ശബ്ദം: Ensure all cables are properly shielded and connected. Check for ground loops and try using balanced cables where possible. Keep audio cables away from power cables.
• ഇടവിട്ടുള്ള ശബ്ദം: Inspect cables and connectors for damage. Ensure all connections are secure.

If the issue persists after these steps, consult a qualified technician or contact Behringer support.

6 സ്പെസിഫിക്കേഷനുകൾ

7. വാറൻ്റിയും പിന്തുണയും

വിശദമായ വാറന്റി വിവരങ്ങൾക്കും സാങ്കേതിക പിന്തുണയ്ക്കും, ദയവായി ഔദ്യോഗിക ബെഹ്രിംഗർ കാണുക. website or the documentation included with your product. Specific warranty terms may vary by region and retailer.