Hobbywing Skywalker V2 50A Brushless Flight Controller User Manual

ആമുഖം

Thank you for choosing the Hobbywing Skywalker V2 50A Brushless Flight Controller (ESC). This ESC is designed for RC aircraft, offering reliable performance and advanced features. This manual provides essential information for proper installation, operation, and maintenance to ensure safe and optimal use of your product.

സുരക്ഷാ മാർഗ്ഗനിർദ്ദേശങ്ങൾ

Please read and understand all safety instructions before operating the ESC. Failure to do so may result in damage to the product, property, or personal injury.

• Always connect the ESC to the motor and battery correctly, observing polarity.
• ഷോർട്ട് സർക്യൂട്ടുകൾ തടയാൻ എല്ലാ കണക്ഷനുകളും സുരക്ഷിതമാണെന്ന് ഉറപ്പാക്കുക.
• Keep the ESC away from moisture, dust, and extreme temperatures.
• നിർദ്ദിഷ്ട കറന്റും വോള്യവും കവിയരുത്tagഇ റേറ്റിംഗുകൾ.
• Always disconnect the battery after use.
• Perform initial setup and throttle calibration with the propeller removed for safety.

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Hobbywing Skywalker V2 50A ESC is an advanced brushless flight controller featuring a 32-bit microprocessor for enhanced throttle response and reduced operating temperature. It supports 3-4S LiPo batteries and includes a 5V@5A SBEC. The ESC is equipped with DEO (Driving Efficiency Optimization) technology and offers various programmable braking modes and protection mechanisms.

This image displays the Hobbywing Skywalker V2 50A Brushless Flight Controller. It is a compact, black-sleeved electronic speed controller with various wires extending from both ends. The label on the ESC clearly indicates 'HOBBYWING SKYWALKER 50A V2-UBEC', '3-4S Lipo SBEC 5V@5A', and regulatory marks like 'RoHS FC CE'. The wires are color-coded for different connections, including thicker black wires for motor connections and thinner red, yellow, and white wires for signal and power input.

സാങ്കേതിക സവിശേഷതകൾ

പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ സാധാരണയായി ഇനിപ്പറയുന്ന ഇനങ്ങൾ ഉൾപ്പെടുന്നു:

• Hobbywing Skywalker V2 50A Brushless Flight Controller
• LED Program Box (H.W30501003) or compatible transmitter for programming (may be sold separately)

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

വയറിംഗ്

Proper wiring is crucial for the safe and correct operation of your ESC. Refer to the diagram below for typical connections. Always ensure correct polarity.

• മോട്ടോർ കണക്ഷൻ: Connect the three thicker black wires from the ESC to the three motor wires. The order may affect motor rotation direction; swap any two wires if the motor spins in the wrong direction.
• ബാറ്ററി കണക്ഷൻ: Connect the red (+) and black (-) wires from the ESC to your LiPo battery, ensuring correct polarity.
• റിസീവർ കണക്ഷൻ: Connect the signal cable (usually a three-wire servo connector) from the ESC to the throttle channel of your RC receiver.

പ്രാരംഭ കോൺഫിഗറേഷൻ

Before first flight, it is recommended to perform throttle range calibration and configure any desired programmable parameters.

ഓപ്പറേഷൻ

ത്രോട്ടിൽ റേഞ്ച് കാലിബ്രേഷൻ

This procedure ensures that the ESC correctly recognizes the full throttle range from your transmitter.

1. നിങ്ങളുടെ ട്രാൻസ്മിറ്റർ ഓണാക്കി ത്രോട്ടിൽ സ്റ്റിക്ക് അതിന്റെ പരമാവധി സ്ഥാനത്തേക്ക് സജ്ജമാക്കുക.
2. Connect the battery to the ESC. The motor will emit a series of beeps.
3. When you hear a specific tone (usually two short beeps), move the throttle stick to its minimum position.
4. The ESC will emit another series of beeps, confirming the throttle range has been learned.
5. Disconnect the battery. The calibration is complete.

ESC പ്രോഗ്രാമിംഗ്

The Skywalker V2 50A ESC offers various programmable parameters to fine-tune its performance. These can be adjusted using a Hobbywing LED Program Box (H.W30501003) or through your transmitter.

Programmable features include:

• Brake Type and Brake Force
• കട്ട്ഓഫ് വോളിയംtage (for LiPo cell protection)
• LiPo Cell Count Setting
• സ്റ്റാർട്ടപ്പ് മോഡ്
• തിരയൽ മോഡ്
• സമയക്രമീകരണം
• Active Freewheel

Refer to the specific instructions provided with your LED Program Box or transmitter for detailed programming steps.

മെയിൻ്റനൻസ്

Regular maintenance helps prolong the life and ensure the reliability of your ESC.

• Keep the ESC clean and free from dirt, dust, and debris.
• Inspect all wires and connectors periodically for signs of wear, damage, or corrosion.
• Ensure adequate airflow around the ESC during operation to prevent overheating.
• Store the ESC in a dry, cool place when not in use.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues with your ESC, refer to the table below for common problems and solutions.

വാറൻ്റിയും പിന്തുണയും

Hobbywing products are manufactured to high-quality standards. This product typically comes with a 1-year availability for spare parts. For warranty claims or technical support, please contact your retailer or visit the official Hobbywing webസഹായത്തിനുള്ള സൈറ്റ്.