Fosmon C-10681 24-Hour Dual Outlet Mechanical Timer Instruction Manual

1. ആമുഖം

This manual provides instructions for the safe and efficient operation of your Fosmon C-10681 24-Hour Dual Outlet Mechanical Timer. This device is designed to automate the on/off cycles of connected electrical appliances, offering convenience and potential energy savings. Please read this manual thoroughly before use and retain it for future reference.

2 സുരക്ഷാ വിവരങ്ങൾ

• ഇൻഡോർ ഉപയോഗത്തിന് മാത്രം. വെള്ളത്തിനോ ഈർപ്പത്തിനോ വിധേയമാകരുത്.
• Do not exceed the electrical ratings: 125VAC, 15A, 1875W, 10A Tungsten, 3/4HP.
• ഗ്രൗണ്ടഡ് 3-പ്രോങ് ഔട്ട്‌ലെറ്റിൽ ടൈമർ സുരക്ഷിതമായി പ്ലഗ് ചെയ്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
• Do not use with appliances that could cause hazardous conditions if left unattended (e.g., heating appliances, power tools).
• കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
• ഉപകരണം ഡിസ്അസംബ്ലിംഗ് ചെയ്യുകയോ പരിഷ്കരിക്കുകയോ ചെയ്യരുത്.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Fosmon C-10681 is a mechanical timer featuring a 24-hour dial with multiple push pins for programming. It includes dual outlets to control two devices simultaneously.

ചിത്രം 1: മുൻവശവും വശവും view of the Fosmon C-10681 timer.

Figure 2: The timer features dual outlets for connecting two devices.

4. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

1. Reset Pins: When new, all pins around the dial are typically pressed down. Pull all pins UP to the OFF position before programming.
2. നിലവിലെ സമയം സജ്ജമാക്കുക: Rotate the entire dial clockwise until the arrow labeled "TIME NOW" points to the current time. The dial is marked with AM (white section) and PM (black section) hours.
3. പ്രോഗ്രാം ഓൺ/ഓഫ് സമയങ്ങൾ: Push the pins താഴേക്ക് for the periods you want the connected device(s) to be ON. Each pin represents a 30-minute interval. For example, to turn a device on from 6:00 PM to 11:00 PM, push down all pins between 6 PM and 11 PM.
4. ടൈമർ മോഡ് സജീവമാക്കുക: Locate the slide switch on the side of the timer. Slide it to the ടൈമർ (clock icon) position to enable programmed operation. If you want the device to be continuously ON, slide the switch to the ON സ്ഥാനം.
5. പ്ലഗ് ഇൻ: Plug the timer into a grounded 3-prong wall outlet. Then, plug your appliance(s) into the dual outlets on the timer.

Figure 3: The timer dial with 30-minute interval pins for programming.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once programmed and plugged in, the timer's dial will continuously rotate. When the current time aligns with a section where pins are pushed താഴേക്ക്, power will be supplied to the connected devices. When the current time aligns with a section where pins are pulled UP, power will be cut off. The settings will repeat daily.

6. ആപ്ലിക്കേഷനുകളും ഉപയോഗവും

This timer is suitable for a variety of indoor applications to automate electrical devices:

• ലൈറ്റിംഗ്: Lamps, indoor lights, Christmas lights, holiday decorations.
• വീട്ടുപകരണങ്ങൾ: Small appliances, fans, humidifiers, coffee machines.
• പ്രത്യേകത: Reptile lights, grow lights, aquarium fish tanks.

Figure 4: The timer is compatible with a wide range of household devices.

Figure 5: Automating devices with the timer can help reduce energy consumption.

Figure 6: The timer supports various bulb types including CFL, Incandescent, and LED.

7. പരിപാലനം

• Wipe the timer with a dry, soft cloth to clean. Do not use liquid cleaners.
• Ensure the timer is unplugged before cleaning.
• ഉപയോഗത്തിലില്ലാത്തപ്പോൾ തണുത്തതും ഉണങ്ങിയതുമായ സ്ഥലത്ത് സൂക്ഷിക്കുക.

8. പ്രശ്‌നപരിഹാരം

• Device not turning ON/OFF at programmed times:
  • Check if the slide switch is set to the ടൈമർ സ്ഥാനം.
  • Verify that the current time on the dial is correctly aligned with the "TIME NOW" arrow.
  • Ensure the pins for the desired ON/OFF periods are correctly pushed down (ON) or pulled up (OFF).
  • Confirm the timer is securely plugged into a live wall outlet and the appliance(s) are properly connected to the timer.
• Timer not keeping accurate time after a power outage:
  • Mechanical timers typically do not have a battery backup. After a power interruption, you will need to manually reset the current time on the dial to ensure accurate future operation.

9 സ്പെസിഫിക്കേഷനുകൾ

Figure 7: The Fosmon C-10681 timer is ETL Listed for safety and quality.

10. വാറൻ്റിയും പിന്തുണയും

Fosmon products are designed with quality and safety in mind. For any questions or assistance, please contact Fosmon customer support. Information regarding warranty coverage can typically be found on the manufacturer's webസൈറ്റ് അല്ലെങ്കിൽ ഉൽപ്പന്ന പാക്കേജിംഗ്.