ആമുഖം
This manual provides detailed instructions for the New bee WJ21 Wireless Guitar System. This system is designed to offer stable and high-quality audio transmission for various electric instruments, including guitars, basses, and other devices with a 6.35mm jack. It features low noise, minimal latency, and a transmission range of over 20 meters, ensuring a reliable wireless experience.
പാക്കേജ് ഉള്ളടക്കം
താഴെ ലിസ്റ്റ് ചെയ്തിരിക്കുന്ന എല്ലാ ഇനങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉൾപ്പെടുത്തിയിട്ടുണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:
- 1 x Wireless Guitar Transmitter
- 1 x Wireless Guitar Receiver
- 1 x Carry Case for Wireless Guitar System
- 1 x Dual-ended USB C Charging Cable
- 3 x Guitar Picks
Image: The package contents laid out, showing the transmitter, receiver, USB-C cable, user manual, protective bag, and the product box.
ഉൽപ്പന്നം കഴിഞ്ഞുview
The New bee WJ21 Wireless Guitar System consists of a transmitter and a receiver, both designed for ease of use and compatibility.
പ്രധാന സവിശേഷതകൾ:
- 2.4 GHz വയർലെസ് ട്രാൻസ്മിഷൻ: Provides a stable and clear audio signal.
- 280° Rotatable 1/4" Plug: Ensures compatibility with various instrument jack locations.
- റീചാർജ് ചെയ്യാവുന്ന ബാറ്ററി: Built-in battery offers approximately 6 hours of working time on a full charge.
- LED ബാറ്ററി സൂചകം: Four blue LEDs indicate the remaining battery level (20%, 50%, 75%, 100%).
- ജോടിയാക്കൽ ബട്ടൺ: For easy and quick connection between the transmitter and receiver.
- USB-C ചാർജിംഗ് പോർട്ട്: For convenient recharging using the included dual-ended USB-C cable.
Image: A close-up of the wireless unit highlighting the 280-degree rotatable 1/4-inch plug, demonstrating its flexibility for various instrument designs.
Image: An illustration showing the wireless transmitter and receiver, emphasizing the 6-hour working time and the LED battery indicators (20%, 50%, 75%, 100%) and the USB-C charging cable.
സജ്ജമാക്കുക
1. ഉപകരണങ്ങൾ ചാർജ് ചെയ്യുന്നു
- Connect the dual-ended USB-C charging cable to both the transmitter and the receiver.
- USB-C കേബിളിന്റെ മറ്റേ അറ്റം അനുയോജ്യമായ ഒരു USB പവർ അഡാപ്റ്ററിലേക്ക് പ്ലഗ് ചെയ്യുക (ഉൾപ്പെടുത്തിയിട്ടില്ല).
- The LED battery indicators will illuminate during charging. A full charge typically takes about 2 hours.
- Once fully charged, all four LED indicators will remain solid. Disconnect the charging cable.
2. ട്രാൻസ്മിറ്ററും റിസീവറും ജോടിയാക്കൽ
The devices are designed for automatic pairing after the initial setup.
- Ensure both the transmitter and receiver are fully charged and powered off.
- Turn on the receiver by pressing and holding its power button.
- Press the pairing button on the receiver. The pairing indicator light will flash.
- Turn on the transmitter by pressing and holding its power button.
- Press and hold the pairing button on the transmitter for 3 seconds.
- The devices will pair automatically. The pairing indicator lights on both units will turn solid, indicating a successful connection.
- For subsequent uses, the devices will automatically pair when powered on.
3. ഉപകരണങ്ങളുമായി ബന്ധിപ്പിക്കുന്നു കൂടാതെ Ampജീവപര്യന്തം
- Plug the transmitter into the 6.35mm output jack of your instrument (e.g., guitar, bass). Adjust the rotatable plug for optimal fit.
- Plug the receiver into the 6.35mm input jack of your amplifier, mixer, or other audio device.
- Ensure both units are powered on and successfully paired.
Image: The wireless transmitter connected to a guitar and the receiver connected to an amplifier, illustrating the system's compatibility with various instruments and audio equipment.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
പവർ ഓൺ/ഓഫ്
- To power on, press and hold the power button on both the transmitter and receiver until the indicator lights illuminate.
- To power off, press and hold the power button on both units until the indicator lights turn off.
ബാറ്ററി നില
The four blue LED lights on both the transmitter and receiver indicate the battery level:
- One LED: Approximately 20% battery remaining (low battery).
- Two LEDs: Approximately 50% battery remaining.
- Three LEDs: Approximately 75% battery remaining.
- Four LEDs: 100% battery remaining (full charge).
Multi-Device Operation (6 Channels)
The system supports up to 6 pairs of wireless systems operating simultaneously in the same environment without interference. Additionally, one transmitter can broadcast its signal to up to 6 receivers of the same model. This allows for flexible setups in various performance or practice scenarios.
Image: A musician playing a bass guitar with the wireless transmitter, while the signal is received by six separate amplifiers, demonstrating the multi-receiver capability.
മെയിൻ്റനൻസ്
- വൃത്തിയാക്കൽ: ഉപകരണങ്ങൾ വൃത്തിയാക്കാൻ മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിക്കുക. കഠിനമായ രാസവസ്തുക്കളോ ഉരച്ചിലുകളോ ഉള്ള വസ്തുക്കൾ ഉപയോഗിക്കുന്നത് ഒഴിവാക്കുക.
- സംഭരണം: When not in use, store the wireless system in its protective carry case in a cool, dry place, away from direct sunlight and extreme temperatures.
- ബാറ്ററി കെയർ: To prolong battery life, avoid fully discharging the devices frequently. Recharge them regularly, even if not in constant use.
- കൈകാര്യം ചെയ്യൽ: Handle the devices with care to prevent damage to the plugs and internal components.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ശബ്ദമോ ഇടയ്ക്കിടെയുള്ള ശബ്ദമോ ഇല്ല | Low battery on transmitter or receiver; Devices not paired; Out of range; Interference; Incorrect connection. | Charge both units fully. Re-pair the transmitter and receiver. Ensure devices are within 20 meters (65 feet) of each other. Move away from other 2.4 GHz devices. Check that the transmitter is in the instrument and receiver in the ampജീവൻ. |
| ഉപകരണങ്ങൾ ജോടിയാക്കുന്നില്ല | Incorrect pairing procedure; Low battery. | Follow the pairing instructions carefully. Ensure both units are sufficiently charged. |
| ചെറിയ ബാറ്ററി ലൈഫ് | Partial charge; Old battery. | Ensure devices are charged for the full 2 hours. Battery performance may degrade over time. |
| Sound crackling or dropping out (especially with bass) | Interference; Compatibility with specific low frequencies. | Try adjusting the input gain on your amplifier. Ensure no other strong wireless signals are nearby. While designed for bass, some specific bass setups might experience unique frequency response characteristics. |
| ചാർജിംഗ് പ്രവർത്തിക്കുന്നില്ല | Faulty cable or power adapter; Damaged charging port. | Try a different USB-C cable and power adapter. Inspect the charging ports for any visible damage. |
സ്പെസിഫിക്കേഷനുകൾ
- മോഡൽ നമ്പർ: WJ21
- ട്രാൻസ്മിഷൻ ഫ്രീക്വൻസി: 2.4 GHz
- ട്രാൻസ്മിഷൻ ദൂരം: Over 20 meters (65 feet)
- ലേറ്റൻസി: <12മി.സെ
- ബാറ്ററി തരം: ലിഥിയം പോളിമർ
- ചാർജിംഗ് സമയം: ഏകദേശം 2 മണിക്കൂർ
- ജോലി സമയം: ഏകദേശം 6 മണിക്കൂർ
- ഊർജ്ജ സ്രോതസ്സ്: ബാറ്ററി പവർ
- വാല്യംtage: 9 വോൾട്ട്
- ഹാർഡ്വെയർ ഇന്റർഫേസ്: 6.35mm (1/4") Jack
- ഉൽപ്പന്ന അളവുകൾ: 5.91 x 5.91 x 1.97 ഇഞ്ച്
- ഇനത്തിൻ്റെ ഭാരം: 7.7 ഔൺസ്
വാറൻ്റി വിവരങ്ങൾ
For detailed warranty information, please refer to the warranty card included with your product or visit the official New bee webസൈറ്റ്. വാറന്റി നിബന്ധനകളും വ്യവസ്ഥകളും പ്രദേശത്തിനും വാങ്ങൽ തീയതിക്കും അനുസരിച്ച് വ്യത്യാസപ്പെടാം.
ഉപഭോക്തൃ പിന്തുണ
If you encounter any issues or have questions regarding your New bee WJ21 Wireless Guitar System, please contact New bee customer support through their official website or the retailer from whom you purchased the product. Please have your model number (WJ21) and purchase details ready when contacting support.
