MICTUNING 140PCS P1S Switch Panel Sticker User Manual

ആമുഖം

This manual provides detailed instructions for the proper use, installation, and maintenance of your MICTUNING 140PCS P1S Switch Panel Stickers. These high-quality, waterproof, and flame-retardant labels are designed to enhance the functionality and appearance of your switch panels in various vehicles, including boats, marine vessels, trucks, RVs, and off-road vehicles. The stickers are specifically designed to allow the RGB backlight of compatible switch panels to shine through, illuminating the icons for clear visibility.

ഉൽപ്പന്നം കഴിഞ്ഞുview

The MICTUNING 140PCS P1S Switch Panel Sticker set includes a comprehensive collection of pre-cut, black stickers with white patterns, offering a wide range of icons for various functions. Blank stickers are also included for custom labeling. The strong adhesive ensures permanent application, and the durable PBC plastic material is suitable for multiple environments.

ചിത്രം 1: A full sheet displaying the 140 individual MICTUNING P1S Switch Panel Stickers. The stickers feature a black background with white icons and text, designed to be backlit. Icons include common vehicle functions such as STROBE, SIDE, RUNNING, DUAL, AFT LIGHTS, HALO, HAZARD, TRAY LIGHTS, BEACON, EMERGENCY, CHASE LIGHT, DRL, INTERIOR, INT LIGHTS, WATER, SIREN, FRIDGE, A/C, FUEL PUMP, IDLE UP, BATT ISO, STEREO, REAR, FRONT, HEATER, FUEL TANK, WIPERS, WINCH IN, WATER PUMP, AIR COMP, OFF ROAD, RAISE, LOWER, WINCH, FISHBOX PUMP, FISH BOX, SHOWER, HOT WATER, CAMERA, PTO, ZOMBIE, SPEAKER, BEEP, LOCK, UNLOCK, ACC, START/STOP, FUEL, and numbered buttons 1-8. Additional icons for marine and off-road applications are also visible, such as NAV LIGHTS, ANCHOR LIGHT, SPOT LIGHT, BILGE PUMP, LIVEWELL, DEPTH FINDER, DECK LIGHTS, VOLT METER, OUTLETS, USB OUTLETS, FAN, FLOOD, SWAYBAR, WHIP, LIGHT BAR, HORN, FOG, HOOD, GRILLE, WINDSHIELD, FOG LIGHTS, ROOF, AMBER, BUMPER, UNDER GLOW, AUX, PASS, DRIVER, LIGHT CUBES, RACK, AMBER, BUMPER, UNDER GLOW, AUX, PASS, DRIVER, LIGHT CUBES, RACK, FUEL 1, FUEL 2, FAN OFF, GPS, PA SYSTEM, AUX, WINDSHIELD LIGHT, CARGO, BACKUP, ROCK, HUBS, LOCKER ENABLE, RADIO, FRIDGE, CAMERA, WELDER, POWER, AUX1, AUX2, LIGHT BAR, LIGHT CUBES, DRIVING, WHIP, BUMPER, WHEEL RING, CARGO, DUST LIGHT, and ROOF LIGHT. Blank stickers are also present for user customization.

സജ്ജീകരണവും പ്രയോഗവും

1. ഉപരിതലം തയ്യാറാക്കുക: Ensure the surface of your switch panel is clean, dry, and free from dust, grease, or any other contaminants. Use a mild cleaner if necessary, and allow it to dry completely.
2. Select the Sticker: Identify the appropriate sticker for each switch function. The set includes a wide variety of icons and text labels. If a specific label is not available, use one of the provided blank stickers for DIY customization.
3. Peel and Align: Carefully peel the chosen sticker from its backing sheet. Align the sticker precisely over the designated switch button on your panel. Take care to center it for optimal appearance and backlight illumination.
4. ഉറച്ചു പ്രയോഗിക്കുക: Once aligned, gently press the sticker onto the switch button, working from the center outwards to remove any air bubbles. Apply firm, even pressure across the entire sticker to ensure strong adhesion.
5. Verify Adhesion: After application, lightly run your finger over the sticker edges to confirm it is securely attached. The strong adhesive is designed for permanent use.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

These stickers are designed to be used with switch panels that feature RGB backlighting, such as the MICTUNING P1S series. When the switch panel's backlight is active, the white patterns on the black stickers will illuminate, making the switch functions clearly visible in various lighting conditions, including low light or darkness. The illumination enhances readability and provides a professional, organized look to your vehicle's control panel.

മെയിൻ്റനൻസ്

• വൃത്തിയാക്കൽ: To clean the stickers, use a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, as these may damage the sticker material or affect its adhesion.
• ഈട്: The stickers are made from durable PBC plastic and are waterproof and flame-retardant, designed to withstand various environmental conditions. However, prolonged exposure to extreme temperatures or direct sunlight may eventually affect their appearance.
• മാറ്റിസ്ഥാപിക്കൽ: If a sticker becomes damaged or you wish to change a label, carefully peel off the old sticker. Clean the surface thoroughly before applying a new one from your spare collection.

ട്രബിൾഷൂട്ടിംഗ്

• Sticker Not Adhering Properly:
  പരിഹാരം: Ensure the switch panel surface was thoroughly cleaned and dry before application. Re-apply pressure to the sticker, or if necessary, replace with a new sticker after proper surface preparation.
• Backlight Not Shining Through:
  പരിഹാരം: Verify that your switch panel has an active backlight function. Ensure the sticker is correctly aligned over the switch button's illuminated area. These stickers are specifically designed for backlit panels.
• Air Bubbles Under Sticker:
  പരിഹാരം: During application, press firmly from the center outwards to push out any air bubbles. If bubbles appear after application, gently try to smooth them out towards the edges with a soft cloth.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

MICTUNING products are manufactured to high-quality standards. For specific warranty information or technical support regarding your switch panel stickers, please refer to the official MICTUNING webസൈറ്റിൽ ബന്ധപ്പെടുകയോ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി നേരിട്ട് ബന്ധപ്പെടുകയോ ചെയ്യുക. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾ:
പിന്തുണയ്ക്കായി, സന്ദർശിക്കുക MICTUNING Store on Amazon or the official MICTUNING webസൈറ്റ്.