ഉൽപ്പന്നം കഴിഞ്ഞുview
The AnkerMake M5 Model Cooling Fan is designed to provide efficient and powerful cooling for 3D printing models. It features a dual 3010 cooling fan design, delivering high-speed performance with 16000 RPM and 2.26 CFM airflow, ensuring optimal print quality by rapidly cooling extruded material.
Image: Two AnkerMake M5 Model Cooling Fans, showcasing their compact design and wiring.
ബോക്സിൽ എന്താണുള്ളത്
Verify that all components are present upon unboxing. The package includes the following items:
- 1 x Left Model Cooling Fan
- 1 x Right Model Cooling Fan
Image: The AnkerMake M5 Model Cooling Fan retail packaging alongside the two cooling fan units.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
This section provides instructions for installing the AnkerMake M5 Model Cooling Fans into your compatible 3D printer. Ensure the printer is powered off and disconnected from the power source before beginning installation.
ആവശ്യമായ ഉപകരണങ്ങൾ:
- ചെറിയ ഫിലിപ്സ് ഹെഡ് സ്ക്രൂഡ്രൈവർ
- ആന്റി-സ്റ്റാറ്റിക് റിസ്റ്റ് സ്ട്രാപ്പ് (ശുപാർശ ചെയ്യുന്നത്)
ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ:
- പവർ ഓഫ്: Disconnect the 3D printer from the main power supply and ensure it is completely off.
- ഫാൻ കമ്പാർട്ടുമെന്റിലേക്കുള്ള പ്രവേശനം: Locate the existing model cooling fans on your AnkerMake M5 3D printer. This typically involves removing a cover or shroud around the print head assembly. Refer to your 3D printer's specific service manual for exact access procedures.
- Disconnect Old Fans: Carefully disconnect the wiring of the old cooling fans from their respective ports on the printer's circuit board. Note the orientation and connection points for reinstallation.
- Remove Old Fans: Unscrew and remove the old cooling fans from their mounting points.
- Install New Fans: Position the new AnkerMake M5 Model Cooling Fans (Left and Right) into their designated slots. Ensure the airflow direction matches the original fan setup (typically blowing towards the nozzle/print). Secure them with the appropriate screws.
- വയറിംഗ് ബന്ധിപ്പിക്കുക: Connect the wiring of the new fans to the corresponding ports on the printer's circuit board. Ensure a secure and correct connection to avoid damage.
- വീണ്ടും കൂട്ടിച്ചേർക്കുക: Reattach any covers or shrouds that were removed during the process.
- പവർ ഓണും ടെസ്റ്റും: Reconnect the 3D printer to the power supply and power it on. Initiate a test print or a fan test function (if available on your printer) to confirm proper operation of the new cooling fans.
If you encounter any difficulties during installation, consult the AnkerMake M5 3D printer's official documentation or contact AnkerMake support.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The AnkerMake M5 Model Cooling Fans operate in conjunction with your 3D printer's firmware and slicing software settings. Their primary function is to cool the freshly extruded filament, preventing warping, stringing, and improving overall print quality, especially for overhangs and bridges.
ഫാൻ നിയന്ത്രണം:
- സ്ലൈസർ സോഫ്റ്റ്വെയർ: Fan speed is typically controlled through your 3D printing slicer software (e.g., Cura, PrusaSlicer, AnkerMake Slicer). You can set fan speeds for different layers, print features (e.g., bridges), or specific filament types.
- Printer Interface: Some 3D printers allow for manual fan speed adjustment directly from the printer's control panel during a print. Refer to your printer's manual for this functionality.
ശുപാർശ ചെയ്യുന്ന ഉപയോഗം:
- PLA: Generally requires significant cooling. Start with 100% fan speed after the first few layers.
- PETG: Requires less cooling than PLA to prevent layer adhesion issues. Often 20-50% fan speed is sufficient.
- ABS/ASA: Typically requires minimal to no cooling to prevent warping and cracking due to rapid temperature changes.
- Other Filaments: Consult the filament manufacturer's recommendations for optimal cooling settings.
Experiment with fan settings to find the ideal balance for your specific filament, print speed, and model geometry to achieve the best print results.
മെയിൻ്റനൻസ്
Regular maintenance ensures the longevity and optimal performance of your AnkerMake M5 Model Cooling Fans.
വൃത്തിയാക്കൽ:
- ആവൃത്തി: Inspect the fans monthly or more frequently if operating in a dusty environment.
- നടപടിക്രമം:
- Power off and unplug the 3D printer.
- Gently use a soft brush, compressed air, or a vacuum cleaner with a narrow attachment to remove dust and filament debris from the fan blades and housing.
- Avoid touching the fan blades directly with your fingers to prevent damage.
പരിശോധന:
- Periodically check the fan wiring for any signs of wear, fraying, or loose connections.
- Ensure the fans are securely mounted and do not wobble or vibrate excessively during operation.
- Listen for unusual noises (e.g., grinding, rattling) which may indicate a failing bearing or obstruction.
ട്രബിൾഷൂട്ടിംഗ്
This section addresses common issues you might encounter with your AnkerMake M5 Model Cooling Fans.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ഫാൻ കറങ്ങുന്നില്ല | Loose connection, obstructed blades, faulty fan, incorrect slicer settings. | Check wiring connections. Remove any obstructions. Verify fan speed settings in slicer. If still not working, the fan may need replacement. |
| അമിതമായ ശബ്ദം/വൈബ്രേഷൻ | Dust/debris on blades, loose mounting screws, worn bearing. | Clean fan blades. Tighten mounting screws. If noise persists, the fan may be failing and require replacement. |
| Poor print quality (e.g., warping, stringing) | Insufficient or excessive cooling, fan not operating correctly. | Adjust fan speed settings in slicer. Ensure fans are spinning correctly. Check for obstructions. |
For issues not covered here, please refer to the AnkerMake M5 3D printer's comprehensive troubleshooting guide or contact customer support.
സ്പെസിഫിക്കേഷനുകൾ
Detailed technical specifications for the AnkerMake M5 Model Cooling Fan:
Image: A table detailing the technical specifications of the AnkerMake M5 Model Cooling Fan.
| ആട്രിബ്യൂട്ട് | മൂല്യം |
|---|---|
| ഉൽപ്പന്ന അളവുകൾ | 1.18 x 1.18 x 0.39 ഇഞ്ച് (30 x 30 x 10 മിമി) |
| ഇനം മോഡൽ നമ്പർ | V7114011 |
| ബ്രാൻഡ് | അങ്കർമേക്ക് |
| മെറ്റീരിയൽ | ചെമ്പ് |
| നിറം | കറുപ്പ് |
| ഇനത്തിൻ്റെ ഭാരം | 0.02 പൗണ്ട് (0.32 ഔൺസ്) |
| റേറ്റുചെയ്ത വോളിയംtage | 24V |
| റേറ്റുചെയ്ത പവർ | 1.92W |
| പരമാവധി വേഗത | 16000 ആർപിഎം |
| ശബ്ദ നില | 42dB (at 25°C, 1m distance, with 18dB background noise) |
| സേവന ജീവിതം | 70,000+ മണിക്കൂർ |
| യു.പി.സി | 194644151041 |
വാറൻ്റിയും പിന്തുണയും
AnkerMake products are backed by a limited warranty. For specific warranty terms and conditions, please refer to the official AnkerMake website or the warranty card included with your original 3D printer purchase.
ഉപഭോക്തൃ പിന്തുണ:
If you require technical assistance, have questions about installation, operation, or troubleshooting, please contact AnkerMake customer support through their official channels:
- Webസൈറ്റ്: Visit the official AnkerMake webപതിവുചോദ്യങ്ങൾ, പിന്തുണാ ലേഖനങ്ങൾ, ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾ എന്നിവയ്ക്കുള്ള സൈറ്റ്.
- ഇമെയിൽ: Refer to the AnkerMake website for their support email address.
- ഓൺലൈൻ കമ്മ്യൂണിറ്റി: Join the AnkerMake user community forums for peer support and shared knowledge.
When contacting support, please have your product model number (V7114011) and purchase information ready.
