iFi GO Pod HD Bluetooth DAC & Headphone Ampലൈഫ്ഫയർ യൂസർ മാന്വൽ

ആമുഖം

The iFi GO Pod is a high-performance wearable Digital-to-Analog Converter (DAC) and headphone amplifier designed to enhance the audio quality of your In-Ear Monitors (IEMs). It features advanced Bluetooth capabilities, a fully balanced amplifier, and support for high-resolution audio up to 24bit/96kHz. This manual provides comprehensive instructions for setting up, operating, and maintaining your GO Pod.

ബോക്സിൽ എന്താണുള്ളത്

• GO Pod (Left & Right units)
• Interchangeable Ear Loops (MMCX & 0.78mm 2-pin connectors)
• ചാർജിംഗ് കേസ്
• USB-C മുതൽ USB-A കേബിൾ വരെ

Image: The iFi GO Pod units and their charging case, showing the complete package contents.

സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

1. Charge the GO Pod: Before first use, fully charge the GO Pod units and the charging case. Connect the provided USB-C cable to the charging case and a power source. The case also supports Qi wireless charging.
   

   Image: The iFi GO Pod charging case, highlighting the USB-C charging port.
2. Attach IEMs: Select the appropriate ear loops (MMCX or 0.78mm 2-pin) for your In-Ear Monitors. Carefully connect your IEMs to the GO Pod units. Ensure a secure connection.
   

   Image: The iFi GO Pod units with In-Ear Monitors (IEMs) connected, ready for use.

3. പവർ ഓൺ: The GO Pod units will typically power on automatically when removed from the charging case. If not, press and hold the touch control area on each unit until the indicator light illuminates.
4. ജോടിയാക്കൽ: The GO Pod units will enter pairing mode automatically when first powered on or when disconnected from a previously paired device. Open the Bluetooth settings on your source device (e.g., smartphone, tablet) and select "iFi GO Pod" from the list of available devices.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

ബ്ലൂടൂത്ത് കണക്റ്റിവിറ്റി

The GO Pod utilizes Qualcomm's QCC5144 Bluetooth 5.2 chipset, supporting various high-definition codecs including LDAC, LHDC/HWA, aptX Adaptive, aptX, AAC, and SBC for optimal audio transmission.

ടച്ച് നിയന്ത്രണങ്ങൾ

Each GO Pod unit features a touch-sensitive area for controlling playback and calls. Specific functions may vary slightly depending on your connected device and application.

• പ്ലേ/താൽക്കാലികമായി നിർത്തുക: Single tap on either unit.
• അടുത്ത ട്രാക്ക്: Double tap on the right unit.
• മുമ്പത്തെ ട്രാക്ക്: Double tap on the left unit.
• വോളിയം കൂട്ടുക: Triple tap on the right unit.
• വോളിയം താഴേക്ക്: Triple tap on the left unit.
• ഉത്തരം/അവസാന കോൾ: Single tap on either unit during an incoming call.
• കോൾ നിരസിക്കുക: Press and hold on either unit during an incoming call.
• വോയ്‌സ് അസിസ്റ്റന്റ്: Press and hold on either unit (when not on a call).
• Lock Touch Controls: Four quick presses on either unit. Repeat to unlock.

ബാറ്ററി ലൈഫ്

The GO Pod units provide approximately 7 hours of playback on a single charge. The smart charging case extends the total playtime to approximately 35 hours.

മെയിൻ്റനൻസ്

• വൃത്തിയാക്കൽ: Use a soft, dry cloth to clean the GO Pod units and charging case. Avoid using abrasive cleaners or solvents.
• ജല പ്രതിരോധം: The GO Pod units are IPX5 water and sweat resistant, making them suitable for exercise. However, they are not designed for submersion in water. Ensure the charging contacts are dry before placing them back in the case.
• സംഭരണം: When not in use, store the GO Pod units in their charging case to protect them and keep them charged.

Image: The underside of the iFi GO Pod units, showing the charging contacts.

ട്രബിൾഷൂട്ടിംഗ്

• ശബ്‌ദ/ഇടവിട്ടുള്ള കണക്ഷൻ ഇല്ല:
  • Ensure the GO Pod units are fully charged.
  • Verify that the GO Pod is correctly paired and connected to your source device.
  • Move closer to your source device to reduce potential interference.
  • Disconnect and re-pair the GO Pod with your device.
  • Check that your IEMs are securely attached to the GO Pod units.
• Units Not Charging:
  • Ensure the USB-C cable is properly connected to the charging case and power source.
  • Check that the charging contacts on both the GO Pod units and the case are clean and free of debris.
  • If using wireless charging, ensure the case is correctly positioned on a Qi-compatible charger.
• ടച്ച് നിയന്ത്രണങ്ങൾ പ്രതികരിക്കുന്നില്ല:
  • Ensure the touch controls are not locked (four quick presses to toggle).
  • Clean the touch-sensitive area.
  • Restart the GO Pod units by placing them back in the case and then removing them.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information, technical support, or further assistance, please visit the official iFi Audio webസൈറ്റ് അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുക.

Official iFi Audio Store: iFi Audio on Amazon