Bousnic Grey Replacement Remote for P-Collar 650 User Manual

ആമുഖം

This manual provides essential information for the proper use and maintenance of your Bousnic Grey Replacement Remote for P-Collar 650. Please read these instructions carefully before operating the device to ensure safe and effective use.

ഉൽപ്പന്നം കഴിഞ്ഞുview

Image: The Bousnic Grey Replacement Remote, featuring a digital display showing channel and battery level, along with three control buttons for Tone, Vibration, and Static Correction.

The Bousnic Grey Replacement Remote is designed to control compatible P-Collar 650 receiver collars. It features a clear digital display for channel selection and battery status, along with dedicated buttons for various training modes.

സജ്ജീകരണവും ജോടിയാക്കലും

To ensure your remote functions correctly with your receiver collar, follow these pairing steps:

1. Use the switch on the remote to select your preferred channel (e.g., Channel 1 or Channel 2).
2. With the Remote turned on and the Receiver Collar turned off, press and hold the ഓൺ/ഓഫ് ബട്ടൺ on the Receiver Collar for 4-5 seconds.
3. The Red & Green LED on the Receiver Collar will blink for approximately 10 seconds, indicating that it is ready for pairing.
4. While the Receiver Collar's LEDs are blinking, press and hold the ടോൺ ബട്ടൺ ഒപ്പം വൈബ്രേഷൻ ബട്ടൺ on the remote simultaneously for 2-3 seconds. The Green LED on the Receiver Collar will blink 5 times, indicating successful pairing.

If pairing is unsuccessful, repeat the steps from the beginning. Ensure both devices are fully charged before attempting to pair.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once paired, the remote allows you to control your P-Collar 650 receiver collar. The remote typically features buttons for:

• ടോൺ ബട്ടൺ: Activates an audible tone on the receiver collar.
• വൈബ്രേഷൻ ബട്ടൺ: Activates a vibration on the receiver collar.
• Static Correction Button: Activates static correction. It is recommended to use tone and vibration modes for training whenever possible.

The digital display shows the selected channel and the remote's battery level. Ensure the remote is within effective range of the receiver collar for proper operation.

മെയിൻ്റനൻസ്

To ensure the longevity and optimal performance of your Bousnic remote, follow these maintenance guidelines:

• വൃത്തിയാക്കൽ: Wipe the remote with a soft, damp തുണി. കഠിനമായ രാസവസ്തുക്കളോ ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ഉപയോഗിക്കരുത്.
• സംഭരണം: നേരിട്ടുള്ള സൂര്യപ്രകാശത്തിൽ നിന്നും കടുത്ത താപനിലയിൽ നിന്നും മാറി തണുത്തതും വരണ്ടതുമായ സ്ഥലത്ത് റിമോട്ട് സൂക്ഷിക്കുക.
• ബാറ്ററി കെയർ: Charge the remote regularly, even if not in frequent use, to maintain battery health. Avoid fully depleting the battery for extended periods.
• വാട്ടർ എക്സ്പോഷർ: While the remote may be splash-resistant, avoid submerging it in water.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues with your Bousnic remote, consider the following common solutions:

• റിമോട്ട് പ്രതികരിക്കുന്നില്ല:
  • Check the remote's battery level and charge if necessary.
  • റിമോട്ട് ഓണാണെന്ന് ഉറപ്പാക്കുക.
• Collar Not Responding to Remote:
  • Verify that the receiver collar is turned on and fully charged.
  • Confirm that the remote and collar are paired to the same channel.
  • Re-attempt the pairing process as described in the 'Setup and Pairing' section.
  • Ensure the remote and collar are within effective operating range.
• ഹ്രസ്വ ബാറ്ററി ലൈഫ്:
  • Ensure the remote is fully charged before use.
  • Battery life can vary based on usage frequency and intensity.

If problems persist after attempting these solutions, please refer to the support information provided below.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please contact BOUSNIC customer service. Refer to the product packaging or the official BOUSNIC webഏറ്റവും പുതിയ കോൺടാക്റ്റ് വിശദാംശങ്ങൾക്കായി സൈറ്റ്.