Galax Revolution 06 (Rev-06) Mid Tower ATX Gaming Cabinet

ആമുഖം

Welcome to the instruction manual for your Galax Revolution 06 (Rev-06) Mid Tower ATX Gaming Cabinet. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your new computer case. Please read this manual thoroughly before installation and retain it for future reference.

ചിത്രം: മുൻഭാഗം view of the Galax Revolution 06 gaming cabinet.

സുരക്ഷാ വിവരങ്ങൾ

• Always disconnect power from the power supply unit (PSU) before installing or servicing any components inside the cabinet.
• Handle tempered glass panels with extreme care to prevent breakage. Avoid impacts or dropping the panel.
• Avoid exposing the cabinet to extreme temperatures, direct sunlight, or high humidity.
• Keep small parts, such as screws and accessories, out of reach of children.
• Ensure proper grounding of your computer system to prevent electrical hazards.

പാക്കേജ് ഉള്ളടക്കം

നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:

• Galax Revolution 06 Mid Tower ATX Gaming Cabinet
• 4 Pre-installed RGB Cooling Fans
• Accessory Kit (includes various screws, standoffs, and cable ties)
• ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Galax Revolution 06 is a mid-tower ATX gaming cabinet engineered for optimal airflow and component visibility. It features a mesh front panel for superior cooling performance and a hinged magnetic tempered glass side panel for easy access and a clear view നിങ്ങളുടെ ആന്തരിക ഘടകങ്ങളുടെ.

പ്രധാന സവിശേഷതകൾ:

• Superior Cooling: Equipped with 4 pre-installed RGB cooling fans and a mesh front panel to ensure peak airflow.
• ക്ലിയർ View: Hinged magnetic tempered glass door provides a crystal-clear view of your PC system's interior.
• ഫ്രണ്ട് പാനൽ കണക്റ്റിവിറ്റി: Includes 1x USB 3.0, 2x USB 2.0, 3.5mm Microphone port, 3.5mm Headphone port, Reset Button, and Power Button.
• ലിക്വിഡ് കൂളിംഗ് സപ്പോർട്ട്: Versatile radiator mounting options for Front (240mm/280mm/360mm), Top (240mm/280mm), and Rear (120mm).
• ഗ്രാഫിക്സ് കാർഡ് പിന്തുണ: Accommodates graphics cards up to 330mm in length.

ഫ്രണ്ട് പാനൽ I/O പോർട്ടുകൾ:

ചിത്രം: വിശദമായത് view of the front panel connectivity, including USB 3.0, USB 2.0, microphone, headphone, reset, and power buttons.

സജ്ജമാക്കുക

1. കേസ് തയ്യാറാക്കൽ

• Place the cabinet on a stable, flat surface.
• Gently pull the handle to open the hinged tempered glass side panel.
• Remove any protective films from the glass and other surfaces.

2. മദർബോർഡ് ഇൻസ്റ്റാളേഷൻ

• Identify the correct standoff positions for your motherboard (ATX, Micro-ATX, Mini-ITX).
• Install the necessary standoffs from the accessory kit into the corresponding holes on the motherboard tray.
• Carefully place your motherboard into the cabinet, aligning it with the installed standoffs and the rear I/O shield opening.
• Secure the motherboard with screws provided in the accessory kit.

Image: Empty internal view of the case, illustrating motherboard mounting points and cable routing options.

3. പവർ സപ്ലൈ യൂണിറ്റ് (പി‌എസ്‌യു) ഇൻസ്റ്റാളേഷൻ

• Install the PSU into its designated compartment at the bottom rear of the cabinet.
• Secure the PSU with screws from the rear of the cabinet.

4. ഗ്രാഫിക്സ് കാർഡ് (GPU) ഇൻസ്റ്റലേഷൻ

• Remove the necessary PCIe slot covers from the rear of the cabinet.
• മദർബോർഡിലെ ഉചിതമായ PCIe സ്ലോട്ടിൽ നിങ്ങളുടെ ഗ്രാഫിക്സ് കാർഡ് ചേർക്കുക.
• Secure the GPU with screws. The cabinet supports GPUs up to 330mm in length.

5. സ്റ്റോറേജ് ഡ്രൈവ് ഇൻസ്റ്റാളേഷൻ

• Install 2.5-inch SSDs or 3.5-inch HDDs into the available drive bays. Refer to the cabinet's internal layout for specific mounting points and methods.

6. കേബിൾ മാനേജ്മെന്റ്

• Utilize the cable routing holes and tie-down points behind the motherboard tray to manage cables neatly. This practice improves airflow and enhances the aesthetic appeal of your build.

ചിത്രം: ഉദാample of internal component installation and organized cable routing within the cabinet.

7. Fan and Radiator Installation (Optional)

• The cabinet comes with 4 pre-installed RGB fans. Additional fans or liquid cooling radiators can be installed in the following locations:
• മുൻഭാഗം: Supports 240mm, 280mm, or 360mm radiators.
• മുകളിൽ: Supports 240mm or 280mm radiators.
• പിൻഭാഗം: Supports a 120mm radiator.

പ്രവർത്തിക്കുന്നു

• Once all internal components are installed and cables are securely connected, close the tempered glass side panel.
• Connect your monitor, keyboard, mouse, and other peripherals to your system.
• Connect the power cable to the power supply unit (PSU) and then to a wall outlet.
• Press the power button located on the front panel of the cabinet to start your system.
• The pre-installed RGB fans will illuminate upon power-on, providing visual effects and cooling.

മെയിൻ്റനൻസ്

പൊടി ഫിൽട്ടർ വൃത്തിയാക്കൽ

• The cabinet features a magnetic dust filter on the top panel. Regularly remove and clean this filter to maintain optimal airflow and prevent dust buildup inside the system.
• To clean, simply lift the magnetic filter, gently brush off accumulated dust, or rinse with water if necessary. Ensure it is completely dry before reattaching.

Tempered Glass Care

• Clean the tempered glass panel with a soft, lint-free cloth and a non-abrasive glass cleaner.
• Avoid using harsh chemicals, abrasive materials, or excessive force, as these can scratch or damage the glass.

ജനറൽ ക്ലീനിംഗ്

• Periodically use compressed air to remove dust from internal components, fan blades, and mesh panels to ensure efficient cooling.

ട്രബിൾഷൂട്ടിംഗ്

സിസ്റ്റം ഓണാക്കുന്നില്ല

• Check all power connections: ensure the PSU is connected to the wall outlet, the 24-pin ATX power cable and 8-pin CPU power cable are securely connected to the motherboard, and the front panel power switch cable is correctly connected to the motherboard's front panel header.
• Verify that the power switch on the back of the PSU is in the "ON" (I) position.

ഫാനുകൾ കറങ്ങുന്നില്ല / RGB പ്രകാശിക്കുന്നില്ല

• Ensure that all fan power cables and RGB cables are correctly connected to the motherboard or any included fan/RGB controller.
• അയഞ്ഞ കണക്ഷനുകൾക്കായി പരിശോധിക്കുക.

ഡിസ്പ്ലേ ഔട്ട്പുട്ട് ഇല്ല

• Confirm that your monitor is connected to the graphics card (or motherboard integrated graphics, if applicable) and is powered on.
• Reseat the graphics card and RAM modules to ensure they are properly seated in their slots.

For further assistance, refer to your motherboard manual or contact Galax support.

സ്പെസിഫിക്കേഷനുകൾ

Image: Dimensions and internal layout diagram with key specifications.

വാറൻ്റിയും പിന്തുണയും

വാറൻ്റി വിവരങ്ങൾ

This Galax Revolution 06 Gaming Cabinet comes with a 1 വർഷത്തെ വാറൻ്റി from the date of purchase. Please retain your proof of purchase for all warranty claims. The warranty covers manufacturing defects under normal use. Damage resulting from improper installation, misuse, unauthorized modifications, or accidents is not covered.

നിർമ്മാതാവിന്റെ വിശദാംശങ്ങൾ

നിർമ്മാതാവ്: Galaxy Microsystems Ltd., Hong Kong, Kowloon Bay, Wang Chiu Rd, 33, Exchange Tower, Room 1601, 16th Floor.

ഇറക്കുമതിക്കാരൻ (ഇന്ത്യ): Technology And Gadgets, Gala no.142/143, 1st Floor, Building no.6, Mittal Industrial Estate, Marol, Andheri (East), Mumbai - 400059., Mumbai, India, Maharashtra.

സാങ്കേതിക സഹായം

For technical support, warranty inquiries, or further assistance, please contact your local retailer or refer to the official Galax support channels available on their webസൈറ്റ്.