KEMIMOTO Motorcycle Speaker MU-B0117 User Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The KEMIMOTO Motorcycle Speaker MU-B0117 is a waterproof stereo sound bar designed for motorcycles and ATVs. It features a built-in amplifier, Bluetooth connectivity, FM radio, AUX input, and USB playback. This speaker is engineered to provide clear audio even at highway speeds.

Image: KEMIMOTO Motorcycle Speaker providing clear audio at highway speeds.

Image: Internal components of the speaker, illustrating the high-performance audio amplifier for clear sound.

2. ബോക്സിൽ എന്താണുള്ളത്?

ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക.

Image: All items included in the KEMIMOTO Motorcycle Speaker package.

• സ്പീക്കർ x 1
• പവർ കോർഡ് x 1
• Controller Extension Cable x 1
• Spare fuse x 2
• Controller Power Cord x 1
• മൗണ്ട് clamp anti-slip pad x 4
• കേബിൾ ബന്ധങ്ങൾ x 5
• Controller stand x 1
• കൺട്രോളർ x 1
• ഹെക്സ് റെഞ്ച് x 1
• ഷഡ്ഭുജ സോക്കറ്റ് ഹെഡ് സ്ക്രൂ x 4
• Relax washer x 4
• നട്ട് x 2
• Extension bracket x 2
• മൗണ്ട് clamp x 2
• മാനുവൽ x 1

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

3.1 സ്പീക്കർ മൗണ്ട് ചെയ്യുന്നു

The speaker features a universal mount clamp designed for 0.75-1 inch round rods. Ensure the mounting location is secure and does not obstruct vehicle controls or visibility.

Image: Step-by-step installation of the mounting clamp and speaker onto a handlebar.

1. മൗണ്ടിംഗ് cl അറ്റാച്ചുചെയ്യുകamps to your desired location on the handlebar or round rod.
2. Secure the extension brackets to the clamps.
3. Position the speaker onto the extension brackets and fasten it using the provided screws and washers.
4. Mount the controller using its stand in an easily accessible location.

3.2 വയറിംഗ് നിർദ്ദേശങ്ങൾ

The speaker system requires a standard 12V power connection. Use the provided long power cord with ring terminal connectors for a secure connection to your vehicle's battery.

Image: Detailed wiring diagram for the speaker system.

• Connect the red wire to the positive (+) pole of the 12V power supply.
• Connect the black wire to the negative (-) pole of the 12V power supply.
• Ensure the 3A fuse is properly installed in the power line.
• Connect the controller interface cable to the main unit.
• The Bluetooth signal cable is integrated within the wire harness protection net.
• The USB input port is for inserting a USB flash disk for media playback.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1 പവർ ഓൺ/ഓഫ്

Press and hold the power button on the controller to turn the speaker system on or off.

4.2 മോഡ് തിരഞ്ഞെടുക്കൽ

Press the 'MODE' button on the controller to switch between available playback modes: Bluetooth, FM Radio, AUX, and USB.

4.3 ബ്ലൂടൂത്ത് കണക്ഷൻ

To connect a Bluetooth-compatible device:

1. സ്പീക്കർ ബ്ലൂടൂത്ത് മോഡിലേക്ക് മാറ്റുക.
2. Enable Bluetooth on your mobile device (phone, tablet, etc.).
3. ഇതിനായി തിരയുക available devices and select 'KEMIMOTO Speaker' (or similar name) to pair.
4. Once paired, audio from your device will play through the speaker.

Image: Wireless connection via Bluetooth, showing a phone paired with the speaker.

4.4 എഫ്എം റേഡിയോ പ്രവർത്തനം

In FM Radio mode, use the controller buttons to scan for stations, change frequencies, and adjust volume.

4.5 AUX ഇൻപുട്ട്

Connect an external audio device using a 3.5mm AUX cable to the AUX input port on the speaker system.

4.6 യുഎസ്ബി പ്ലേബാക്ക്

ഓഡിയോ അടങ്ങിയ യുഎസ്ബി ഫ്ലാഷ് ഡ്രൈവ് ചേർക്കുക files into the USB input port for direct playback.

5. പരിപാലനം

5.1 വാട്ടർപ്രൂഫ് ഡിസൈൻ

The KEMIMOTO Motorcycle Speaker features a double waterproof aluminum enclosure. This design protects the speaker from water damage, making it suitable for use in various weather conditions. Ensure all connections are secure to maintain water resistance.

5.2 വൃത്തിയാക്കൽ

Clean the speaker and controller with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners that could damage the finish or electronic components.

5.3 ഫ്യൂസ് മാറ്റിസ്ഥാപിക്കൽ

If the speaker system loses power, check the 3A fuse in the power line. Replace it with a spare fuse of the same rating if necessary. Incorrect fuse replacement can cause damage to the unit or vehicle electrical system.

6. പ്രശ്‌നപരിഹാരം

• ശക്തിയില്ല: Check the power connections to the 12V supply. Ensure the fuse is intact and properly seated. Verify the vehicle's battery has sufficient charge.
• ശബ്ദമില്ല: Confirm the speaker is powered on and the volume is turned up. Check the audio source (Bluetooth, FM, AUX, USB) and ensure it is playing. For Bluetooth, verify the device is paired and connected.
• കുറഞ്ഞ ശബ്‌ദം/മോശം ശബ്‌ദ നിലവാരം: Adjust the volume on both the speaker and your connected device. Ensure the audio source is of good quality. Check for any obstructions around the speaker. Note that environmental factors like wind noise at high speeds can affect perceived loudness.
• ബ്ലൂടൂത്ത് വിച്ഛേദിക്കൽ: Ensure your device is within the 10-meter Bluetooth range. Avoid obstacles that may interfere with the signal. Try re-pairing the device.
• എഫ്എം റേഡിയോ സ്റ്റാറ്റിക്: Ensure the FM antenna is properly connected. Move to an area with better signal reception.
• ഫ്യൂസ് ആവർത്തിച്ച് ഊതുന്നു: This may indicate a short circuit or an electrical issue. Disconnect the speaker and consult a qualified technician. Do not repeatedly replace fuses without addressing the underlying cause.

7 സ്പെസിഫിക്കേഷനുകൾ

Image: Product dimensions and mounting component measurements.

8. വാറൻ്റിയും പിന്തുണയും

This KEMIMOTO product comes with a Limited Warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact KEMIMOTO customer support.

For technical assistance, troubleshooting, or replacement parts, please visit the official KEMIMOTO webസൈറ്റ് അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുക.