മാനുവലുകൾ+

ROBOTIME TG507, TGB02

ROBOTIME 3D Wooden Puzzle Big Ben TG507 & DIY Book Nook Kit Sunshine Town TGB02 Instruction Manual

Model Numbers: TG507 (Big Ben), TGB02 (Sunshine Town Book Nook)

1. ആമുഖം

This manual provides detailed instructions for the assembly, operation, and maintenance of your ROBOTIME 3D Wooden Puzzle Big Ben (TG507) and DIY Book Nook Kit Sunshine Town (TGB02). Please read all instructions carefully before beginning assembly to ensure a smooth and enjoyable building experience.

2 സുരക്ഷാ വിവരങ്ങൾ

  • ചെറിയ ഭാഗങ്ങൾ മുന്നറിയിപ്പ്: ഈ കിറ്റിൽ ചെറിയ ഭാഗങ്ങൾ അടങ്ങിയിരിക്കുന്നു, ശ്വാസംമുട്ടൽ അപകടങ്ങൾ കാരണം 3 വയസ്സിന് താഴെയുള്ള കുട്ടികൾക്ക് ഇത് അനുയോജ്യമല്ല.
  • മൂർച്ചയുള്ള അഗ്രങ്ങൾ: Wooden pieces may have sharp edges. Handle with care during removal from sheets and assembly. Sanding tools may be provided or recommended for smoothing edges.
  • പശ ഉപയോഗം: If adhesive is included or required, use in a well-ventilated area. Avoid contact with skin and eyes.
  • ഇലക്ട്രിക്കൽ ഘടകങ്ങൾ: The LED lighting components are low voltage. Do not attempt to modify or connect to external power sources not specified in the instructions.
  • മുതിർന്നവരുടെ മേൽനോട്ടം: പ്രായം കുറഞ്ഞ നിർമ്മാതാക്കൾക്ക് മുതിർന്നവരുടെ മേൽനോട്ടം ശുപാർശ ചെയ്യുന്നു.

3. പാക്കേജ് ഉള്ളടക്കം

Your ROBOTIME kit includes the following components:

  • ബിഗ് ബെൻ (TG507) നായി മുൻകൂട്ടി മുറിച്ച മര ഷീറ്റുകൾ
  • Pre-cut wooden sheets for Sunshine Town Book Nook (TGB02)
  • LED lighting components and wiring
  • Instruction booklets for each model
  • Small tools (e.g., sandpaper, tweezers, if applicable)

Note: Specific components may vary slightly. Please refer to the individual instruction booklets for a detailed list of parts for each model.

4. സജ്ജീകരണവും അസംബ്ലിയും

Assembly requires patience and attention to detail. Follow the numbered steps in the included instruction booklets for each model. The general process involves:

  1. തയ്യാറാക്കൽ: Carefully punch out all wooden pieces from their sheets. Use sandpaper to smooth any rough edges if necessary. Organize pieces by number or type.
  2. ബന്ധിപ്പിക്കുന്ന ഭാഗങ്ങൾ: Interlock pieces according to the diagrams. Some connections may require gentle force or a small amount of adhesive (not always included) for stability.
  3. LED ഇൻസ്റ്റാളേഷൻ: Integrate the LED wiring and components as instructed. Ensure proper connection and placement for illumination.
  4. അന്തിമ അസംബ്ലി: Complete the structural assembly and add decorative elements.

4.1. Big Ben (TG507) Assembly

The Big Ben model is a detailed replica of the iconic British landmark, featuring intricate architectural elements and LED lighting. Assembly size is approximately 3.9 x 4.2 x 7.5 inches.

Assembled ROBOTIME Big Ben 3D Wooden Puzzle with internal LED lights glowing

Image: The fully assembled Big Ben 3D wooden puzzle, illuminated by internal LED lights, showcasing its detailed structure.

Pay close attention to the clock tower section and the placement of the LED lights to ensure even illumination. The instruction booklet will guide you through each layer and component.

ക്ലോസ് അപ്പ് view of the Big Ben 3D wooden puzzle showing clock face and window details

ചിത്രം: വിശദമായ ഒരു ചിത്രം view of the Big Ben model, highlighting the intricate clock face and window designs, crucial for accurate assembly.

4.2. Sunshine Town Book Nook (TGB02) Assembly

The Sunshine Town Book Nook creates a miniature street scene designed to fit between books on a shelf, complete with LED lighting and various decorative elements. Assembly typically takes around 6 hours.

Assembled ROBOTIME Sunshine Town Book Nook Kit placed between books on a shelf

Image: The completed Sunshine Town Book Nook kit, illuminated and nestled between books, demonstrating its intended use as a decorative bookend.

This kit involves assembling small furniture, storefronts, and other miniature details. Ensure all decorative pieces are securely attached. The LED lights will bring the scene to life.

നിറഞ്ഞു view of the assembled ROBOTIME Sunshine Town Book Nook Kit with lights on

ചിത്രം: ഒരു സമഗ്രമായ view of the assembled Sunshine Town Book Nook, showcasing its vibrant details and warm LED illumination.

5. LED ലൈറ്റുകൾ പ്രവർത്തിപ്പിക്കൽ

Both the Big Ben and Sunshine Town models feature integrated LED lighting. For the Sunshine Town Book Nook (TGB02), a touch switch is typically located at the base of the model for easy operation.

Close-up of the Sunshine Town Book Nook showing the 'Touch Switch' for LED lights

Image: A close-up of the Sunshine Town Book Nook's base, indicating the 'Touch Switch' used to activate the internal LED lighting.

  • ഊർജ്ജ സ്രോതസ്സ്: Ensure batteries (not included) are correctly installed in the designated battery compartment. Refer to the specific instruction booklet for battery type and placement.
  • സജീവമാക്കൽ: For models with a touch switch, gently press the indicated area to turn the lights on or off. For other models, a small switch or connection point will be specified in the instructions.
  • ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: Replace batteries when the lights dim or cease to function. Follow the instructions for safe battery removal and insertion.

6. പരിപാലനം

  • വൃത്തിയാക്കൽ: Use a soft, dry cloth or a small brush to gently remove dust from the wooden surfaces. Avoid using water or chemical cleaners, as these can damage the wood or electrical components.
  • സംഭരണം: Store the assembled models in a dry environment, away from direct sunlight and extreme temperature fluctuations, to prevent warping or fading of the wood.
  • കൈകാര്യം ചെയ്യൽ: Handle the models with care to avoid breaking delicate parts.

7. പ്രശ്‌നപരിഹാരം

  • Missing or Broken Pieces: Carefully check all wooden sheets and packaging. If a piece is genuinely missing or broken upon arrival, contact customer support with your purchase details.
  • യോജിക്കാത്ത കഷണങ്ങൾ: Ensure you are using the correct pieces for each step. Some pieces may require gentle sanding or a slight adjustment to fit snugly. Do not force pieces, as this can cause breakage.
  • LED വിളക്കുകൾ പ്രവർത്തിക്കുന്നില്ല:
    • Check that batteries are inserted correctly with the correct polarity.
    • ബാറ്ററികൾ പുതിയതാണെന്നും പൂർണ്ണമായും ചാർജ്ജ് ചെയ്തിട്ടുണ്ടെന്നും ഉറപ്പാക്കുക.
    • Verify all wiring connections are secure and not damaged.
    • Confirm the switch (if applicable) is in the 'ON' position or has been properly activated.
  • മോഡൽ അസ്ഥിരത: Recheck all connections. If adhesive was recommended, ensure it has fully cured.

8 സ്പെസിഫിക്കേഷനുകൾ

8.1. Big Ben (TG507)

  • ഉൽപ്പന്ന തരം: 3D വുഡൻ പസിൽ
  • മോഡൽ: ബിഗ് ബെൻ (TG507)
  • അസംബ്ലി വലുപ്പം: ഏകദേശം 3.9 x 4.2 x 7.5 ഇഞ്ച് (10 x 10.7 x 19 സെ.മീ)
  • ഫീച്ചറുകൾ: LED lighting, detailed architectural design
Product information graphic for Big Ben showing dimensions

Image: A graphic displaying the product name 'Big Ben' and its approximate assembly dimensions: 4 inches (width), 4.2 inches (depth), and 7.5 inches (height).

8.2. Sunshine Town Book Nook (TGB02)

  • ഉൽപ്പന്ന തരം: DIY ബുക്ക് നൂക്ക് കിറ്റ്
  • മോഡൽ: Sunshine Town (TGB02)
  • അസംബ്ലി വലുപ്പം: ഏകദേശം 3.9 x 7.1 x 9.5 ഇഞ്ച് (10 x 18 x 24 സെ.മീ)
  • Assembly Hour: ഏകദേശം 6 മണിക്കൂർ
  • ഫീച്ചറുകൾ: LED lighting, touch switch, detailed miniature scene
Product information graphic for Book Nook showing dimensions and features

Image: A graphic detailing the 'Book Nook' product, including its DIY Craft nature, approximate 6-hour assembly time, stylish bookend function, luminous decor feature, and dimensions: 3.9 inches (width), 7.1 inches (depth), and 9.5 inches (height).

9. വാറൻ്റി

ROBOTIME products are manufactured with quality in mind. For specific warranty information regarding manufacturing defects or missing parts, please refer to the packaging or contact ROBOTIME customer support directly. Keep your proof of purchase for any warranty claims.

10. പിന്തുണ

For further assistance, questions, or to report issues, please visit the official ROBOTIME store or contact their customer service department.

ROBOTIME ഔദ്യോഗിക സ്റ്റോർ: Visit the ROBOTIME Store on Amazon