FLEXISPOT QS2L Dual Motor L-Shaped Standing Desk Instruction Manual

പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

അസംബ്ലി ചെയ്യുന്നതിനും ഉപയോഗിക്കുന്നതിനും മുമ്പ് ദയവായി എല്ലാ നിർദ്ദേശങ്ങളും ശ്രദ്ധാപൂർവ്വം വായിക്കുക. ഈ നിർദ്ദേശങ്ങൾ പാലിക്കുന്നതിൽ പരാജയപ്പെടുന്നത് ഉൽപ്പന്നത്തിന് പരിക്കോ കേടുപാടുകളോ ഉണ്ടാക്കാം.

• Ensure the desk is securely assembled according to instructions.
• ശുപാർശ ചെയ്യുന്ന പരമാവധി ഭാരം കവിയരുത് 176 പൗണ്ട്.
• Improper use may result in injury or desk instability.
• ജോലി സമയത്ത് കുട്ടികളെയും വളർത്തുമൃഗങ്ങളെയും മേശയിൽ നിന്ന് അകറ്റി നിർത്തുക.
• Ensure no obstacles are in the path of the desk during height adjustments.

ഉൽപ്പന്നം കഴിഞ്ഞുview

The FLEXISPOT QS2L Dual Motor L-Shaped Standing Desk is designed to provide a versatile and ergonomic workspace. This electric height-adjustable desk allows seamless transitions between sitting and standing positions, promoting better posture and comfort throughout your workday.

പ്രധാന സവിശേഷതകൾ:

• ഡ്യുവൽ മോട്ടോർ സിസ്റ്റം: Ensures stable and smooth height adjustments.
• എൽ-ആകൃതിയിലുള്ള ഡെസ്ക്ടോപ്പ്: Provides an expansive work surface (63x43.3 inches) for multiple monitors and accessories.
• ഉയരം ക്രമീകരിക്കാവുന്ന: Continuous height adjustment from 28.3 to 46 inches.
• Intelligent Controller: Features up/down buttons, a reset function, and memory presets for sitting and standing positions.
• കരുത്തുറ്റ നിർമ്മാണം: Made with industrial-grade alloy steel frame and a durable splice board desktop.
• ഭാരം ശേഷി: Supports up to 176 pounds.

Figure 1: FLEXISPOT QS2L L-Shaped Standing Desk in a modern office setup, showcasing its spacious design and integrated control panel.

Figure 2: The FLEXISPOT QS2L desk integrated into a home office environment, providing ample space for work and accessories.

സ്പെസിഫിക്കേഷനുകൾ

Figure 3: Detailed dimensions of the FLEXISPOT QS2L L-Shaped Standing Desk, showing a width of 63 inches, depth of 43.3 inches, and maximum height of 46 inches.

Figure 4: Diagram illustrating the desktop size (63x43.3 inches) and adjustable height range of the desk frame (28.3-46 inches).

സജ്ജീകരണവും അസംബ്ലിയും

Assembly of the FLEXISPOT QS2L desk requires attention to detail. It is recommended that two people assemble the desk to ensure stability and ease of construction. All necessary hardware and pieces are included.

പൊതുസമ്മേളന ഘട്ടങ്ങൾ:

1. എല്ലാ ഘടകങ്ങളും അൺപാക്ക് ചെയ്ത് നിങ്ങളുടെ ഉൾപ്പെടുത്തിയിരിക്കുന്ന മാനുവലിൽ പാർട്സ് ലിസ്റ്റ് പരിശോധിച്ചുറപ്പിക്കുക.
2. Assemble the desk frame, ensuring all screws are tightened securely.
3. Attach the splice board desktop to the assembled frame.
4. Connect the control panel and motor cables as per the detailed instructions in your manual.
5. Perform an initial reset of the desk (refer to the Operating Instructions section).

Figure 5: The robust 4-leg solid structure and frame of the FLEXISPOT desk, designed for stability and safety, having undergone over 20,000 cycle tests.

Figure 6: Close-up of the dual-stage legs, highlighting the continuous height adjustment capability from 28.3 to 46 inches.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The FLEXISPOT QS2L desk features an intelligent control panel for easy height adjustment and memory functions.

നിയന്ത്രണ പാനൽ പ്രവർത്തനങ്ങൾ:

Figure 7: The intelligent control panel, featuring Up/Down arrows for height adjustment, a Reset button, and memory presets for sitting and standing positions.

• മുകളിലേക്കും താഴേക്കുമുള്ള അമ്പടയാളങ്ങൾ: Press and hold to adjust the desk height upwards or downwards.
• റീസെറ്റ് ബട്ടൺ (R): Used to reset the desk to its lowest position and clear error codes.
• മെമ്മറി പ്രീസെറ്റുകൾ (1, 2, 3, 4):
  1. നിങ്ങൾക്ക് ആവശ്യമുള്ള ഉയരത്തിലേക്ക് ഡെസ്ക് ക്രമീകരിക്കുക.
  2. Press the 'M' button, then press the desired number (1-4) to save the current height.
  3. To recall a saved height, simply press the corresponding number button.
• Sit/Stand Reminders: Some models may include programmable reminders to switch between sitting and standing. Refer to your specific manual for details.

മെയിൻ്റനൻസ്

Proper maintenance ensures the longevity and optimal performance of your FLEXISPOT QS2L desk.

• വൃത്തിയാക്കൽ: Wipe the desk surfaces with a dry cloth. Avoid abrasive cleaners or harsh chemicals.
• സ്ക്രൂവിന്റെ ഇറുകിയത: Periodically check and tighten all screws on the frame, legs, and desktop to maintain stability.
• കേബിൾ മാനേജുമെന്റ്: Ensure all cables are neatly managed and not pinched or tangled, especially during height adjustments. The included cable management tray can assist with this.
• ഭാര പരിധി: Always adhere to the maximum weight recommendation of 176 pounds to prevent damage to the motors and frame.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter any issues with your FLEXISPOT QS2L desk, refer to the solutions below. For complex problems, contact customer support.

പൊതുവായ പ്രശ്നങ്ങളും പരിഹാരങ്ങളും:

1. E10 Error (During manual controller use):
   • Method 1 (Reset): Hold down the down button for three seconds until "RES" is displayed. Release the button. The table will run down to its lowest point and bounce back slightly to show the lowest height. This should resolve the E10 error.
   • Method 2 (Wait): If Method 1 doesn't work, wait 8 minutes for the manual to naturally cool down, then repeat Method 1.
   • Method 3 (Motor Problem): If the above methods fail, there might be a problem with the motor. Disassemble the frame and replace the motor.
2. E20 Error (During manual controller use, often due to overload):
   • ലോഡ് കുറയ്ക്കുക: Ensure the weight on the desk is less than the rated load range (176 lbs). Remove any excess weight.
   • പുന et സജ്ജമാക്കുക: Hold down the down button for three seconds until "RES" is displayed. Release the button. The table will run down to its lowest point and bounce back slightly to show the lowest height. This should resolve the E20 error.
3. അസാധാരണമായ ശബ്ദം:
   • Check Motor Screws: Verify that the two mounting screws of the motor are tight. If not, tighten them.
   • Check Frame Screws: Ensure that the screws on the beam and column are tight. If not, tighten them.
4. Instability / Wobbling:
   • Check Footing and Column Screws: Verify that the screws on the footing and column are tight. If not, tighten them.
   • Check Beam and Column Screws: Ensure that the screws on the beam and column are tight. If not, tighten them.
5. Integral Inability to Rise and Fall / Single Side Lift:
   • Check Hand Controller Wires: Ensure the wires behind the hand controller are properly connected. Reinsert and install if improperly connected.
   • പവർ സപ്ലൈ പരിശോധിക്കുക: Verify that the power supply is properly connected and reinsert it if necessary.
   • പുന et സജ്ജമാക്കുക: Hold down the down button for three seconds until "RES" is displayed. Release the button. The table will run down to its lowest point and bounce back slightly to show the lowest height.
   • Check Hex Bar Installation: Ensure the hex bar is not inverted. The long side with the card slot should be tightened with the motor, and the side with the hole spacer faces up. The hexagon bar with the motor side is mounted on the No. 1 leg, and the short side clamp slot is installed on the No. 2 leg.

വാറൻ്റിയും പിന്തുണയും

The FLEXISPOT QS2L Dual Motor L-Shaped Standing Desk comes with a പരിമിത വാറൻ്റി. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official FLEXISPOT webസൈറ്റ്.

For customer support, technical assistance, or to inquire about replacement parts, please contact FLEXISPOT customer service. Contact information can typically be found on the manufacturer's webസൈറ്റിലോ നിങ്ങളുടെ ഉൽപ്പന്ന പാക്കേജിംഗിലോ.