Danfoss 25T65 077B0025

Danfoss 25T65 Thermostat 077B0025 User Manual

Model: 25T65 077B0025

1. ആമുഖം

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Danfoss 25T65 Thermostat, model 077B0025. This thermostat is designed for use in freezer applications without an alarm function. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

2 സുരക്ഷാ വിവരങ്ങൾ

WARNING: Risk of electric shock. Installation and service should only be performed by qualified personnel.

3. ഉൽപ്പന്ന സവിശേഷതകൾ

The Danfoss 25T65 Thermostat 077B0025 offers reliable temperature control for freezer units. Key features include:

4 സ്പെസിഫിക്കേഷനുകൾ

പരാമീറ്റർമൂല്യം
ബ്രാൻഡ്ഡാൻഫോസ്
മോഡൽ നമ്പർ077B0025
തരം പദവിB0 Standard Thermostat
അപേക്ഷFreezers without alarm
Hot Turn-on Temperature-15.0 ഡിഗ്രി സെൽഷ്യസ്
Hot Turn-off Temperature-23.0 ഡിഗ്രി സെൽഷ്യസ്
Cold Turn-on Temperature-21.9 ഡിഗ്രി സെൽഷ്യസ്
Cold Turn-off Temperature-32.0 ഡിഗ്രി സെൽഷ്യസ്
Capillary Tube Length800 മി.മീ
കണക്റ്റർ തരം6.3 x 0.8 മി.മീ
അംഗീകാരങ്ങൾBEAB, CE, EAC, LLC, CDC, TYSK, CURus

5. ഇൻസ്റ്റലേഷനും സജ്ജീകരണവും

Installation of the Danfoss 25T65 Thermostat 077B0025 should be performed by a qualified technician. Incorrect installation can lead to appliance malfunction or safety hazards.

5.1 പ്രീ-ഇൻസ്റ്റലേഷൻ പരിശോധനകൾ

5.2 ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ

  1. പവർ വിച്ഛേദിക്കുക: Turn off the main power supply to the freezer at the circuit breaker.
  2. Access Thermostat: Locate and carefully remove the access panel or control housing where the thermostat is situated.
  3. പഴയ തെർമോസ്റ്റാറ്റ് നീക്കം ചെയ്യുക:
    • Note or photograph the wiring connections before disconnecting them.
    • Carefully detach the capillary tube from its mounting clips and remove it from the freezer compartment.
    • Unmount the old thermostat.
  4. പുതിയ തെർമോസ്റ്റാറ്റ് ഇൻസ്റ്റാൾ ചെയ്യുക:
    • Mount the new Danfoss 25T65 Thermostat in the same location as the old one.
    • Carefully route the new capillary tube into the freezer compartment, ensuring it is not kinked or damaged. Secure it with mounting clips if provided. The capillary tube tip should be placed in the same position as the original for accurate temperature sensing.
    • Connect the electrical wires to the thermostat terminals (6.3 x 0.8 mm connectors) according to the wiring diagram or your previous notes. Ensure connections are secure.
  5. സുരക്ഷിതവും പരിശോധനയും:
    • Replace any access panels or control housings.
    • Restore power to the freezer.
    • Monitor the freezer's temperature to ensure the thermostat is functioning correctly and maintaining the desired temperature range.
Danfoss 25T65 Thermostat 077B0025 front view

ചിത്രം 1: മുൻഭാഗം view of the Danfoss 25T65 Thermostat 077B0025, showing the model number and temperature markings.

Danfoss 25T65 Thermostat 077B0025 with coiled capillary tube

ചിത്രം 2: മുകളിൽ നിന്ന് താഴേക്ക് view of the Danfoss 25T65 Thermostat 077B0025, illustrating the coiled capillary tube and electrical terminals.

Close-up of Danfoss 25T65 Thermostat 077B0025 electrical terminals

ചിത്രം 3: വിശദമായി view of the electrical terminals on the Danfoss 25T65 Thermostat 077B0025, showing the 6.3 x 0.8 mm connectors.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Danfoss 25T65 Thermostat 077B0025 is an automatic temperature control device. Once properly installed, it regulates the freezer's temperature by cycling the compressor on and off based on the temperature sensed by its capillary tube.

7. പരിപാലനം

The Danfoss 25T65 Thermostat 077B0025 is designed for long-term, reliable operation with minimal maintenance. However, periodic checks can help ensure optimal performance.

No user-serviceable parts inside. For any issues beyond basic inspection, consult a qualified technician.

8. പ്രശ്‌നപരിഹാരം

If you experience issues with your freezer's temperature control, consider the following common troubleshooting steps. Always disconnect power before inspecting internal components.

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ഫ്രീസർ തണുപ്പിക്കുന്നില്ല
  • No power to the freezer.
  • Thermostat faulty.
  • Capillary tube damaged or improperly placed.
  • Other freezer component failure (e.g., compressor, fan).
  • പവർ സപ്ലൈയും സർക്യൂട്ട് ബ്രേക്കറും പരിശോധിക്കുക.
  • Test thermostat continuity with a multimeter (by a qualified technician).
  • Inspect capillary tube for kinks or dislodgement.
  • Consult a qualified appliance repair technician.
Freezer too cold / Freezing excessively
  • Thermostat faulty (stuck in 'on' position).
  • താപനില ക്രമീകരണം വളരെ കുറവാണ്.
  • Test thermostat continuity (by a qualified technician).
  • Adjust temperature setting to a warmer level.
Freezer cycles too frequently
  • Poor door seal.
  • Capillary tube not sensing temperature correctly.
  • Thermostat faulty.
  • Check and replace door seals if necessary.
  • Ensure capillary tube is correctly positioned.
  • Consult a qualified technician for thermostat diagnosis.

If these steps do not resolve the issue, it is recommended to contact a qualified appliance repair professional.

9. വാറൻ്റിയും പിന്തുണയും

Specific warranty information for the Danfoss 25T65 Thermostat 077B0025 is typically provided at the point of purchase or with the original appliance documentation. Please refer to your purchase receipt or contact the seller for details regarding warranty coverage.

For technical support or further assistance, please contact Danfoss customer service or a certified Danfoss service partner. Contact information can usually be found on the official Danfoss webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ ഉൽപ്പന്ന വിതരണക്കാരൻ വഴി.

അനുബന്ധ രേഖകൾ - 25T65 077B0025

പ്രീview ഹീറ്റിംഗ് നിയന്ത്രണത്തിനായുള്ള ഡാൻഫോസ് ലിങ്ക്™ & കണക്ട് തെർമോസ്റ്റാറ്റ് ആപ്ലിക്കേഷൻ ഗൈഡ്
ഡാൻഫോസിൽ നിന്നുള്ള ഈ ആപ്ലിക്കേഷൻ ഗൈഡ് ഡാൻഫോസ് ലിങ്ക്™, കണക്ട് തെർമോസ്റ്റാറ്റ്സ് തപീകരണ നിയന്ത്രണ സംവിധാനങ്ങളെക്കുറിച്ചുള്ള സമഗ്രമായ വിവരങ്ങൾ നൽകുന്നു. സിസ്റ്റം ഘടകങ്ങൾ, താപ വിതരണത്തിനും മുറി മാനേജ്മെന്റിനുമുള്ള പൊതു മാർഗ്ഗനിർദ്ദേശങ്ങൾ, ബോയിലറുകൾ, സെൻട്രൽ ബോയിലറുകൾ, ഡിസ്ട്രിക്റ്റ് ഹീറ്റിംഗ്, ഹീറ്റ് പമ്പുകൾ എന്നിവയ്ക്കുള്ള ആപ്ലിക്കേഷനുകൾ വിശദമായി ഉൾക്കൊള്ളുന്നു, റെസിഡൻഷ്യൽ ക്രമീകരണങ്ങളിൽ ഊർജ്ജ കാര്യക്ഷമതയും സുഖസൗകര്യങ്ങളും ഒപ്റ്റിമൈസ് ചെയ്യുന്നു.
പ്രീview Danfoss 077B7 സർവീസ് തെർമോസ്റ്റാറ്റ് ഇൻസ്റ്റലേഷൻ ഗൈഡ്
Installation guide for Danfoss 077B7 series service thermostats, covering models for ice-cream cabinets, commercial refrigerators, liquid coolers, and more. Includes technical specifications and application details.
പ്രീview ഡാൻഫോസ് അല്ലി™ സ്മാർട്ട് ഹീറ്റിംഗ് സിസ്റ്റം ഉപയോക്തൃ ഗൈഡ്
ഡാൻഫോസ് അല്ലി™ സ്മാർട്ട് ഹീറ്റിംഗ് സിസ്റ്റത്തിനായുള്ള സമഗ്രമായ ഉപയോക്തൃ ഗൈഡ്, ഡാൻഫോസ് അല്ലി™ ഗേറ്റ്‌വേ, റേഡിയേറ്റർ തെർമോസ്റ്റാറ്റുകൾക്കുള്ള ഇൻസ്റ്റാളേഷൻ, ആപ്പ് ഉപയോഗം, സവിശേഷതകൾ, ക്രമീകരണങ്ങൾ, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview Danfoss Icon2™ Room Thermostat Wiring Guide: Star and Serial Configurations
Detailed guide on wiring Danfoss Icon2™ room thermostats using star and serial configurations, including terminal connections and capacity limits for HVAC systems.
പ്രീview Danfoss RET230P Electronic Thermostat - User Guide and Specifications
Comprehensive guide and technical specifications for the Danfoss RET230P Electronic Thermostat, covering its function, installation, operation, and performance details.
പ്രീview Danfoss 077B7 Service Thermostats: Installation Guide and Specifications
Comprehensive installation guide and technical specifications for Danfoss 077B7 series service thermostats, including models 077B7060-077B7068 for commercial refrigeration and ice-cream cabinets.