ആമുഖം
This manual provides essential instructions for the safe and effective operation, maintenance, and troubleshooting of your Interstate Batteries JMP0800 Portable Jump Starter and Power Pack. Please read this manual thoroughly before using the device and retain it for future reference.
പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ
മുന്നറിയിപ്പ്: ഈ ഉൽപ്പന്നത്തിൽ കാൻസറിനും ജനന വൈകല്യങ്ങൾക്കും അല്ലെങ്കിൽ മറ്റ് പ്രത്യുൽപാദന വൈകല്യങ്ങൾക്കും കാരണമാകുമെന്ന് കാലിഫോർണിയ സംസ്ഥാനത്തിന് അറിയാവുന്ന രാസവസ്തുക്കൾ അടങ്ങിയിരിക്കുന്നു. കൂടുതൽ വിവരങ്ങൾക്ക്, ഇവിടെ പോകുക www.P65Warnings.ca.gov.
- ബാറ്ററികളുമായി പ്രവർത്തിക്കുമ്പോൾ എല്ലായ്പ്പോഴും നേത്ര സംരക്ഷണം ധരിക്കുക.
- ഉപയോഗിക്കുന്നതിന് മുമ്പ് ജമ്പ് സ്റ്റാർട്ടർ പൂർണ്ണമായി ചാർജ്ജ് ചെയ്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
- ശീതീകരിച്ച ബാറ്ററി ചാടാൻ ശ്രമിക്കരുത്.
- Do not connect the positive (+) and negative (-) clampകൾ ഒരുമിച്ച്.
- ഉപകരണം കുട്ടികളിൽ നിന്ന് അകറ്റി നിർത്തുക.
- നേരിട്ടുള്ള സൂര്യപ്രകാശവും ചൂടും ഏൽക്കാത്ത തണുത്തതും വരണ്ടതുമായ സ്ഥലത്ത് സൂക്ഷിക്കുക.
- നിർദ്ദിഷ്ട ജമ്പ്-സ്റ്റാർട്ടിംഗ് നടപടിക്രമങ്ങൾക്കായി നിങ്ങളുടെ വാഹനത്തിന്റെ ഉടമയുടെ മാനുവൽ പരിശോധിക്കുക.
പാക്കേജ് ഉള്ളടക്കം
നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:
- Interstate Batteries JMP0800 Jump Starter Power Bank
- സ്മാർട്ട് Clamp Jump Cables
- എസി പവർ അഡാപ്റ്റർ
- USB-C ചാർജിംഗ് കേബിൾ
- 3-in-1 Charging Cables (for various electronic devices)
- Compact Carrying Case
- ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

Image: The Interstate Batteries JMP0800 jump starter unit, smart clamp cables, and a USB charging cable. The jump starter is green and black, with USB ports and a flashlight on one end.

Image: The Interstate Batteries JMP0800 jump starter, smart clamps, USB cable, and a black compact carrying case, alongside the product packaging.
ഉൽപ്പന്നം കഴിഞ്ഞുview
The Interstate Batteries JMP0800 is a versatile portable device designed to jump start 12V vehicles and charge various electronic devices. It features an 8,000 mAh Li-polymer battery, 700A peak current, dual USB outputs, a USB-C quick charge input, and a multi-mode LED flashlight.
ഘടകം തിരിച്ചറിയൽ:

Image: A diagram showing the various components of the JMP0800 jump starter, including battery indicator lights, jump starter cable port, power button, USB outputs, LED flashlight, and USB-C input port.
- ബാറ്ററി ഇൻഡിക്കേറ്റർ ലൈറ്റുകൾ: Display the current charge level.
- Jump Starter Cable Port: Connects to the smart clamp jump cables.
- പവർ ബട്ടൺ: Activates the device and cycles flashlight modes.
- USB Outputs (OUT: 5V/2.4A): For charging electronic devices.
- LED ഫ്ലാഷ്ലൈറ്റ്: Provides illumination with steady, SOS, and strobe modes.
- Quick Charge USB-C Input Port (IN: 5V/3A): ജമ്പ് സ്റ്റാർട്ടർ യൂണിറ്റ് ചാർജ് ചെയ്യുന്നതിന്.

ചിത്രം: ഒരു ക്ലോസ്-അപ്പ് view of the Interstate Batteries JMP0800 jump starter showing four blue LED indicator lights illuminated, indicating a full charge.

ചിത്രം: ഒരു ക്ലോസ്-അപ്പ് view of the end of the Interstate Batteries JMP0800 jump starter, highlighting the two USB output ports and the integrated LED flashlight.
Charging the JMP0800 Unit
Before first use, fully charge the JMP0800 unit. It is recommended to recharge the unit every 3-6 months to maintain optimal battery health, even when not in use.
- Connect the USB-C charging cable to the Quick Charge USB-C Input Port (6) on the JMP0800 unit.
- Connect the other end of the USB-C cable to the provided AC power adapter, then plug the adapter into a standard wall outlet.
- The Battery Indicator Lights (1) will illuminate and flash to indicate charging status. All four lights will be solid when fully charged.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ: ഒരു വാഹനം ചാടി സ്റ്റാർട്ട് ചെയ്യുക
The JMP0800 is designed to jump start 12V vehicles with gasoline engines up to 8.0L and diesel engines up to 8.0L.
Steps for Jump Starting:
- Ensure the JMP0800 unit is sufficiently charged (at least 3 indicator lights).
- Turn off your vehicle's ignition and all accessories (headlights, radio, etc.).
- സ്മാർട്ട് cl ബന്ധിപ്പിക്കുകamp jump cables to the Jump Starter Cable Port (2) on the JMP0800 unit. Ensure a secure connection.
- ബന്ധിപ്പിക്കുക ചുവപ്പ് പോസിറ്റീവ് (+) clamp നിങ്ങളുടെ വാഹനത്തിന്റെ ബാറ്ററിയുടെ പോസിറ്റീവ് (+) ടെർമിനലിലേക്ക്.
- ബന്ധിപ്പിക്കുക കറുപ്പ് നെഗറ്റീവ് (-) clamp നിങ്ങളുടെ വാഹനത്തിന്റെ ബാറ്ററിയുടെ നെഗറ്റീവ് (-) ടെർമിനലിലേക്ക്.
- Observe the indicator lights on the smart clamp unit. A solid green light indicates a correct and safe connection. If a red light or alarm sounds, check connections for polarity reversal or short circuit.
- Once the green light is solid, start your vehicle's engine.
- After the vehicle starts, immediately remove the smart clamp jump cables from the vehicle battery, first the negative (-) clamp, then the positive (+) clamp.
- Disconnect the smart clamp cables from the JMP0800 unit.
കുറിപ്പ്: If the vehicle does not start after the first attempt, wait at least 30 seconds before trying again. Do not attempt more than three consecutive jump starts.
Operating Instructions: Charging Electronic Devices
The JMP0800 can also function as a portable power bank for your USB-powered devices.
- Connect your electronic device's USB charging cable (or the provided 3-in-1 cable) to one of the USB Output Ports (4) on the JMP0800 unit.
- കേബിളിന്റെ മറ്റേ അറ്റം നിങ്ങളുടെ ഇലക്ട്രോണിക് ഉപകരണവുമായി ബന്ധിപ്പിക്കുക.
- The JMP0800 will automatically begin charging your device. The Battery Indicator Lights (1) will show the remaining power level.
LED ഫ്ലാഷ്ലൈറ്റ് ഉപയോഗിക്കുന്നത്:
- Press and hold the Power Button (3) for 3 seconds to turn on the LED Flashlight (5).
- Press the Power Button (3) briefly to cycle through the modes: Steady Beam → SOS Flashing → Strobe Light → Off.
പരിപാലനവും സംഭരണവും
- വൃത്തിയാക്കൽ: Wipe the unit with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.
- ചാർജിംഗ്: Recharge the unit every 3-6 months to prevent deep discharge and prolong battery life.
- സംഭരണം: Store the JMP0800 in its compact carrying case in a cool, dry place, away from direct sunlight, moisture, and extreme temperatures.
- ബാറ്ററി ഡിസ്പോസൽ: Do not dispose of the battery in household waste. Follow local regulations for proper battery recycling.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| വാഹനം സ്റ്റാർട്ട് ആകുന്നില്ല. | JMP0800 unit is not charged. Clamps are not connected correctly. വാഹനത്തിന്റെ ബാറ്ററിക്ക് സാരമായ കേടുപാടുകൾ സംഭവിച്ചിട്ടുണ്ട്. | Charge the JMP0800 unit. Cl പരിശോധിക്കുകamp connections and polarity. Ensure smart clamp indicator is green. Consult a professional mechanic. |
| സ്മാർട്ട് clamp indicator is red or beeping. | റിവേഴ്സ് പോളാരിറ്റി കണക്ഷൻ. Short circuit detected. | cl വിച്ഛേദിക്കുകamps and reconnect with correct polarity (Red to +, Black to -). Cl ഉറപ്പാക്കുകampപരസ്പരം സ്പർശിക്കുന്നില്ല അല്ലെങ്കിൽ മറ്റ് ലോഹ ഭാഗങ്ങൾ സ്പർശിക്കുന്നില്ല. |
| Electronic device not charging. | JMP0800 unit is low on charge. USB cable is faulty or not connected properly. | Recharge the JMP0800 unit. Check cable connections or try a different USB cable. |
| LED flashlight not working. | JMP0800 unit is low on charge. പവർ ബട്ടൺ ശരിയായി അമർത്തിയിട്ടില്ല. | Recharge the JMP0800 unit. Press and hold the power button for 3 seconds to activate. |
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ | JMP0800 |
| ബ്രാൻഡ് | അന്തർസംസ്ഥാന ബാറ്ററികൾ |
| പീക്ക് ഔട്ട്പുട്ട് കറന്റ് | 700 Amps |
| ബാറ്ററി ശേഷി | 8,000 mAh (8Ah) Li-polymer |
| വാഹന അനുയോജ്യത | 12V vehicles (up to 8.0L gasoline, 8.0L diesel engines) |
| USB ഔട്ട്പുട്ട് | Dual 5V/2.4A |
| USB-C ഇൻപുട്ട് | 5V/3A (Quick Charge) |
| ഉൽപ്പന്ന അളവുകൾ | 4.9"D x 4.1"W x 7.7"H |
| ഇനത്തിൻ്റെ ഭാരം | 1.7 പൗണ്ട് |
| യു.പി.സി | 656489002167 |
വാറൻ്റിയും പിന്തുണയും
For warranty information, technical support, or to register your product, please visit the official Interstate Batteries webസൈറ്റ് അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി ബന്ധപ്പെടുക.
ഔദ്യോഗിക ഉപയോക്തൃ മാനുവൽ (PDF): PDF മാനുവൽ ഡൗൺലോഡ് ചെയ്യുക
Manufacturer: Interstate Batteries





