Dskeuzeew 2.5HP Walking Pad Treadmill User Manual

1. ആമുഖം

Thank you for choosing the Dskeuzeew 2.5HP Walking Pad Treadmill. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new fitness equipment. Please read this manual thoroughly before first use and retain it for future reference.

Image: The Dskeuzeew Walking Pad Treadmill, showcasing its compact design and a user engaging in a walking exercise.

2. സജ്ജീകരണം

The Dskeuzeew Walking Pad Treadmill is designed for immediate use with no installation required. It arrives pre-assembled, allowing you to begin your workout shortly after unboxing.

2.1 അൺബോക്സിംഗും പ്രാരംഭ പ്ലേസ്മെന്റും

1. ട്രെഡ്മിൽ അതിന്റെ പാക്കേജിംഗിൽ നിന്ന് ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്യുക.
2. Place the treadmill on a flat, stable surface. Avoid placing it on carpets, as this may affect heat dissipation.
3. Ensure the power cord is accessible to a wall outlet.

2.2 പവർ കണക്ഷൻ

• ട്രെഡ്മില്ലിന്റെ പവർ ഇൻപുട്ടിലേക്ക് പവർ കോർഡ് ബന്ധിപ്പിക്കുക.
• ഒരു സാധാരണ മതിൽ ഔട്ട്ലെറ്റിലേക്ക് പവർ കോർഡ് പ്ലഗ് ചെയ്യുക.
• Locate the main power switch (often red) on the treadmill and turn it to the "ON" position. The LED display should illuminate.

2.3 Handle Setup (if applicable)

This model features a foldable handle. Ensure it is securely locked in the upright position for use or folded down for under-desk operation or storage.

Image: The Dskeuzeew Walking Pad Treadmill demonstrating its foldable handle for versatile use and storage.

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

3.1 റിമോട്ട് കൺട്രോൾ ഓപ്പറേഷൻ

The treadmill is primarily controlled via a smart remote control. This remote is magnetic and can be conveniently stored on the side of the treadmill.

• പവർ ഓൺ/ഓഫ്: Press the "ON/OFF" button to start or stop the treadmill. It will typically perform a 3-second countdown before starting.
• വേഗത ക്രമീകരണം: Use the "+" and "-" buttons to increase or decrease the speed. Speed ranges from 0.6 MPH to 5.0 MPH.
• മോഡ് തിരഞ്ഞെടുക്കൽ: The "M" button allows you to switch between different exercise modes or programs.
• ദ്രുത വേഗത ബട്ടണുകൾ: Some remotes feature quick-speed buttons (e.g., 2, 3, 4 MPH) for instant speed changes.

Image: Close-up of the treadmill's LED display and the remote control, highlighting key functions.

3.2 ടച്ച്സ്ക്രീൻ ഡിസ്പ്ലേ

The integrated LED display shows essential exercise data:

• വേഗത: നിലവിലെ നടത്ത/ഓട്ട വേഗത.
• ദൂരം: ആകെ സഞ്ചരിച്ച ദൂരം.
• സമയം: നിങ്ങളുടെ വ്യായാമത്തിന്റെ ദൈർഘ്യം.
• കത്തിച്ച കലോറി: Estimated calories consumed during exercise.
• പുന et സജ്ജമാക്കുക: A dedicated button (often far left) can reset time and calories.

3.3 ചരിവ് ക്രമീകരണം

The treadmill features a manual incline function:

1. Locate the adjustable legs at the rear of the treadmill.
2. Remove the securing pin from the current position.
3. Raise the treadmill to the desired incline level.
4. Insert the securing pin into the higher hole to lock the incline in place.
5. Ensure both sides are adjusted evenly for stability.

4. പരിപാലനം

4.1 റണ്ണിംഗ് ബെൽറ്റ് ലൂബ്രിക്കേഷൻ

Regular lubrication of the running belt is crucial for optimal performance and longevity of your treadmill. Use the provided silicone oil.

1. ട്രെഡ്മിൽ ഓഫ് ചെയ്ത് അൺപ്ലഗ് ചെയ്യുക.
2. Carefully lift the running belt to expose the deck underneath.
3. Apply a small amount of silicone oil evenly across the center of the deck, beneath the belt.
4. Lower the belt and turn on the treadmill at a low speed (e.g., 0.6 MPH) for 3-5 minutes to distribute the lubricant.

4.2 Running Belt Adjustment (Deviation)

If the running belt shifts to one side, it needs adjustment to prevent wear and ensure safe operation. Use the provided hex wrench.

1. ട്രെഡ്മിൽ ഓഫ് ചെയ്ത് അൺപ്ലഗ് ചെയ്യുക.
2. Identify which side the belt has shifted towards.
3. If the belt has shifted to the ശരിയാണ്, insert the hex wrench into the right adjustment hole and rotate 90 degrees clockwise.
4. If the belt has shifted to the വിട്ടുപോയി, insert the hex wrench into the left adjustment hole and rotate 90 degrees clockwise.
5. Turn on the treadmill at a low speed (e.g., 1 km/h) and observe the belt. Adjust further in small increments if necessary until the belt is centered.

5. പ്രശ്‌നപരിഹാരം

• Treadmill not powering on: Ensure the power cord is securely plugged into both the treadmill and a working wall outlet. Check the main power switch is in the "ON" position.
• Belt shifting/slipping: Refer to the "Running Belt Adjustment" section in Maintenance. Ensure the belt is properly lubricated.
• അസാധാരണമായ ശബ്ദങ്ങൾ: Check for any loose parts or foreign objects under the belt. Ensure the belt is properly aligned and lubricated. If noises persist, contact customer support.
• റിമോട്ട് കൺട്രോൾ പ്രതികരിക്കുന്നില്ല: Check the battery in the remote control. Ensure there are no obstructions between the remote and the treadmill's sensor.
• അമിത ചൂടാക്കൽ: Avoid placing the treadmill on thick carpets which can impede heat dissipation. Ensure adequate ventilation around the motor area.

6 സ്പെസിഫിക്കേഷനുകൾ

7. വാറൻ്റി

The Dskeuzeew Walking Pad Treadmill comes with a 2 വർഷത്തെ വാറൻ്റി. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്ക് നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.

8. ഉപഭോക്തൃ പിന്തുണ

Should you require any assistance with your Dskeuzeew Walking Pad Treadmill, please do not hesitate to contact the Dskeuzeew after-sales service team. They are available to help with any questions or issues you may encounter.

പ്രധാന കുറിപ്പ്: Carpets will affect the heat dissipation of the Treadmill. Do not place the Treadmill on the carpet.