Yaheetech 6ft Pre-lit Artificial Christmas Tree Instruction Manual

1. ആമുഖം

This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your Yaheetech 6ft Pre-lit Artificial Christmas Tree. Please read all instructions carefully before setup and retain this manual for future reference.

The Yaheetech 6ft Pre-lit Artificial Christmas Tree is designed to provide a festive ambiance with its lush green flocked branches and incandescent warm white lights. It features a sturdy metal stand and a space-saving collapsible design for convenient storage.

2 സുരക്ഷാ വിവരങ്ങൾ

• ഇൻഡോർ ഉപയോഗത്തിന് മാത്രം: ഈ ഉൽപ്പന്നം ഇൻഡോർ ഉപയോഗത്തിന് മാത്രമുള്ളതാണ്. വെളിയിൽ ഉപയോഗിക്കരുത്.
• ഇലക്ട്രിക്കൽ സുരക്ഷ: Ensure the power outlet is easily accessible and unplug the tree when not in use or before performing any maintenance. Do not overload electrical outlets.
• സ്ഥിരതയുള്ള സ്ഥാനം: Always place the tree on a flat, stable surface to prevent tipping.
• ചൂടിൽ നിന്ന് അകറ്റി നിർത്തുക: Position the tree away from heat sources such as fireplaces, radiators, or heaters.
• കുട്ടികളും വളർത്തുമൃഗങ്ങളും: Keep children and pets away from the tree during assembly and ensure all parts are securely fastened. Small parts could be a choking hazard.
• ശാഖ കൈകാര്യം ചെയ്യൽ: The branches are made of PVC and are designed to be flexible. Handle with care to avoid damage.

3. പാക്കേജ് ഉള്ളടക്കം

അസംബ്ലി ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• Tree Sections (3 sections: A, B, C - typically labeled)
• മടക്കാവുന്ന മെറ്റൽ സ്റ്റാൻഡ്
• Set Screws for Stand
• Protective Plastic Caps for Stand Feet
• Pre-installed Incandescent Warm White Lights

4. സജ്ജീകരണവും അസംബ്ലിയും

നിങ്ങളുടെ ക്രിസ്മസ് ട്രീ കൂട്ടിച്ചേർക്കാൻ ഈ ഘട്ടങ്ങൾ പാലിക്കുക:

1. സ്റ്റാൻഡ് കൂട്ടിച്ചേർക്കുക: Unfold the metal stand and insert the set screws into the designated holes. Tighten the screws to secure the stand. Attach the protective plastic caps to the feet of the stand to prevent floor scratches.
2. Insert Bottom Section (C): Locate the bottom tree section (usually labeled 'C'). Remove any protective plastic caps from the pole. Insert the pole of section C into the assembled stand.
3. Insert Middle Section (B): Locate the middle tree section (usually labeled 'B'). Remove any protective plastic caps. Carefully align and insert the pole of section B into the top of section C.
4. Insert Top Section (A): Locate the top tree section (usually labeled 'A'). Remove any protective plastic caps. Carefully align and insert the pole of section A into the top of section B.
5. ലൈറ്റ് സ്ട്രിംഗുകൾ ബന്ധിപ്പിക്കുക: Once all tree sections are in place, connect the electrical plugs from each section. Ensure all connections are secure.
6. ശാഖകൾ ഫ്ലഫ് ചെയ്യുക: Starting from the bottom section and working your way up, gently pull apart and shape each branch and branch tip. Bend them outwards and slightly upwards to create a full, natural appearance. This process may take 1-1.5 hours for a 6ft tree.

Figure 1: Visual guide for tree assembly. Steps include stand setup, inserting sections, connecting lights, and fluffing branches.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Your Yaheetech Christmas tree comes pre-lit with incandescent warm white lights.

• പവർ ഓൺ/ഓഫ്: Plug the main power cord into a standard electrical outlet. The lights should illuminate. Unplug to turn off.
• Fluffing for Fullness: After initial assembly, allow the tree to settle for approximately 24 hours. The branches will naturally expand further, contributing to a fuller appearance. Adjust branches as needed to fill any gaps.

Figure 2: Illustration of the tree's appearance before and after proper branch fluffing.

6. പരിപാലനം

• വൃത്തിയാക്കൽ: To clean the tree, gently wipe branches with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• സംഭരണം: When disassembling for storage, reverse the assembly steps. Carefully fold the branches upwards and compress them to fit back into the original packaging or a suitable storage bag. Store in a cool, dry place away from direct sunlight.

7. പ്രശ്‌നപരിഹാരം

• ലൈറ്റുകൾ പ്രവർത്തിക്കുന്നില്ല:
  • Check all electrical connections between tree sections to ensure they are securely plugged in.
  • Verify that the main power cord is properly plugged into a functional wall outlet.
  • Inspect individual bulbs for looseness or breakage. Replace any faulty bulbs if spare bulbs are provided (check package contents).
• Tree Instability:
  • Ensure the metal stand is fully unfolded and the set screws are tightened.
  • Confirm that the bottom tree section is fully inserted into the stand.
  • Place the tree on a flat, level surface.

8 സ്പെസിഫിക്കേഷനുകൾ

Figure 3: Tree dimensions and key features.

9. വാറൻ്റിയും പിന്തുണയും

For warranty information or product support, please refer to the documentation included in your product packaging or contact Yaheetech customer service directly. Keep your purchase receipt for warranty claims.