1. ആമുഖം
This manual provides essential information for the proper installation, operation, and maintenance of the Viega Temponox 1716.1 90-Degree Press Fitting Elbow. Please read these instructions carefully before installation and retain them for future reference. This product is designed for professional use in specific technical applications.
2. ഉൽപ്പന്നം കഴിഞ്ഞുview
2.1. സവിശേഷതകൾ
- Flow-optimized press connection system.
- Constructed from stainless steel 1.4301 for the connector and 1.4520 for the tubes.
- Press connector from d76.1 features a stainless steel cutting ring to ensure mechanical connection strength.
- Pressing force is applied both before and after the sealing element seat for secure connection.
- Suitable for both concealed and exposed riser and floor installations.
- Equipped with SC-Contour for visible leakage of accidentally unpressed connections during system filling.
2.2. മെറ്റീരിയലുകൾ
- കണക്റ്റർ: സ്റ്റെയിൻലെസ്സ് സ്റ്റീൽ 1.4301
- ട്യൂബുകൾ: സ്റ്റെയിൻലെസ്സ് സ്റ്റീൽ 1.4520
- സീലിംഗ് ഘടകങ്ങൾ: EPDM (ethylene propylene diene rubber), black, pre-assembled.
- ലേബലിംഗ്: Brown dot on the press symbol.
- തിരിച്ചറിയൽ: Approved with a brown line on the tubes and a removable brown sticker as a compression indicator for sizes from d76.1.
ചിത്രം 1: Viega Temponox 1716.1 90-Degree Press Fitting Elbow. This image shows the stainless steel elbow with its characteristic press connection ends and a brown marking indicating its specifications and non-suitability for drinking water.
3 സ്പെസിഫിക്കേഷനുകൾ
| സ്പെസിഫിക്കേഷൻ | മൂല്യം |
|---|---|
| ബ്രാൻഡ് | വീഗ |
| മോഡൽ നമ്പർ | 808921 |
| ഉൽപ്പന്ന അളവുകൾ | 15 x 10 x 12 സെ.മീ |
| ഉൽപ്പന്ന ഭാരം | 40 ഗ്രാം |
| മെറ്റീരിയൽ | സ്റ്റെയിൻലെസ്സ് സ്റ്റീൽ |
| നാമമാത്രമായ മതിൽ കനം | 15 മി.മീ |
| പരമാവധി മർദ്ദം | 6.5 Bar (0.65 MPa / 650 kPa / 94.3 PSI) |
| നിറം | See Item Description (typically metallic silver with brown markings) |
4. ഇൻസ്റ്റലേഷനും സജ്ജീകരണവും
The Viega Temponox press fitting system is designed for quick and reliable connections. Installation should only be performed by qualified personnel in accordance with local regulations and industry standards.
4.1 പൊതു ഇൻസ്റ്റാളേഷൻ മാർഗ്ഗനിർദ്ദേശങ്ങൾ
- Ensure that the pipe ends are clean, deburred, and free from damage before inserting into the fitting.
- Insert the pipe fully into the press fitting until it reaches the stop.
- Use an approved Viega press tool and appropriate jaws for the specific fitting size (15 mm).
- Perform the pressing operation according to the press tool manufacturer's instructions.
- After pressing, visually inspect the connection to ensure it is properly formed.
4.2. SC-Contour Feature
The integrated SC-Contour (Safety Connector Contour) ensures that any accidentally unpressed connections will visibly leak during the system's pressure test or initial filling. This feature helps to prevent undetected leaks and ensures system integrity. Viega guarantees the detection of unpressed connections within the following pressure ranges:
- കുറഞ്ഞ ജല സമ്മർദ്ദം: 0.1 MPa / 100 kPa / 1 bar / 14.5 PSI
- പരമാവധി ജല സമ്മർദ്ദം: 0.65 MPa / 650 kPa / 6.5 bar / 94.3 PSI
- കുറഞ്ഞ വായു മർദ്ദം: 22 hPa / 2.2 kPa / 22 mbar / 0.3 PSI
- പരമാവധി വായു മർദ്ദം: 0.3 MPa / 300 kPa / 3 bar / 43.5 PSI
5. ഓപ്പറേറ്റിംഗ് വ്യവസ്ഥകൾ
The Viega Temponox system with EPDM sealing elements is designed for specific operating parameters:
- പരമാവധി പ്രവർത്തന താപനില: 105 °C / 221 °F
- Application Systems: Heating systems according to DIN EN 12828.
പ്രധാന കുറിപ്പ്: ഈ ഉൽപ്പന്നം not suitable for drinking water installations.
6. ആപ്ലിക്കേഷൻ ഏരിയകൾ
The Viega Temponox press fitting system is approved for use in the following applications:
- Closed cooling and heating systems.
- Compressed air systems.
- Solar systems with flat collectors.
- Solar systems with vacuum collectors (only when used with FKM sealing elements, which are not standard for this specific product).
- Various industrial applications.
7. മാനദണ്ഡങ്ങളും അംഗീകാരങ്ങളും
The Viega Temponox press connection system complies with the following standards and directives:
- ഡിൻ ഇഎൻ 10088-2: Stainless steels - Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes.
- DIN EN 10312: Welded stainless steel tubes for the conveyance of water and other aqueous liquids - Technical delivery conditions.
- VDI 2035: For use in heating systems, observe the VDI 2035 directive (Prevention of damage in water heating installations).
- DIN EN 12828: Heating systems in buildings - Design for water-based heating systems.
8. പരിപാലനം
Once properly installed, the Viega Temponox press fitting system requires minimal maintenance. However, regular inspection of the entire system by a qualified professional is recommended to ensure continued optimal performance and detect any potential issues early.
- Periodically check for any signs of leakage, corrosion, or damage to the fittings and pipes.
- Ensure that operating conditions (temperature, pressure) remain within the specified limits.
9. പ്രശ്നപരിഹാരം
Should any issues arise with the Viega Temponox press fitting system, consult a qualified plumbing or HVAC professional. The SC-Contour feature is designed to assist in identifying unpressed connections during initial system testing.
- Leakage during initial pressure test: This indicates an unpressed connection or improper installation. Re-check all connections, especially those identified by the SC-Contour feature.
- System not holding pressure: Verify all connections are properly pressed and sealed. Check for external damage to pipes or fittings.
Do not attempt to repair damaged fittings; replace them with new, approved Viega components.
10. വാറൻ്റിയും പിന്തുണയും
For information regarding product warranty, technical support, or spare parts, please contact Viega customer service or visit the official Viega website. Ensure you have the product model number (808921) and purchase details available when seeking support.
വീഗ ഒഫീഷ്യൽ Webസൈറ്റ്: www.viega.com
