Choetech Choebuds Pro TWS Earphones User Manual

1. ആമുഖം

Thank you for choosing the Choetech Choebuds Pro TWS ANC ENC Earphones. This manual provides essential information for setting up, operating, and maintaining your new earphones. Please read it carefully before use to ensure optimal performance and longevity of your device.

പ്രധാന സവിശേഷതകൾ:

• സുഖപ്രദമായ വസ്ത്രങ്ങൾക്കുള്ള എർഗണോമിക് ഡിസൈൻ
• Sensitive touch controls for easy operation
• Hybrid Active Noise Cancellation (ANC) and Environmental Noise Cancellation (ENC) for immersive audio and clear calls
• 6 Microphones for High-Definition (HD) calls
• Quick connect and simple pairing with advanced Bluetooth 5.3 chip
• IPX7 waterproof rating for protection against sweat and rain
• Master-slave switching for seamless single or dual earbud use
• Low latency for synchronized audio and video
• Long-lasting battery life with portable charging case
• Binaural surround sound and HiFi sound quality
• Hall switch for instant connectivity upon opening the case

A black charging case with three indicator lights on the front, accompanied by two black in-ear earbuds. The earbuds feature a sleek design with a short stem and silicone ear tips.

2. പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• 1 x Choetech Choebuds Pro TWS Bluetooth Earbuds
• 1 x USB-C ഡാറ്റ കേബിൾ
• 1 x ഉപയോക്തൃ മാനുവൽ
• ഇയർ കുഷ്യനുകൾ (വിവിധ വലുപ്പങ്ങൾ)

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

Familiarize yourself with the components of your Choebuds Pro TWS Earphones:

• MFB Power Key: Multi-function button for touch controls.
• Earbud Cap: Silicone ear tip for comfortable fit and sound isolation.
• Magnetic Contact: Charging points on the earbuds and inside the case.
• Sub MIC: Secondary microphone for noise reduction.
• പ്രധാന MIC: Primary microphone for voice pickup during calls.
• ചാർജിംഗ് കേസ് സൂചകം: LED lights on the charging case to show battery status.

The black Choetech Choebuds Pro TWS charging case is open, revealing the charging slots for the earbuds. The two earbuds are placed outside the case, showing their design and charging contacts.

4. സജ്ജീകരണവും ജോടിയാക്കലും

4.1 ആദ്യ ഉപയോഗം

1. ചാർജിംഗ് കെയ്‌സിൽ നിന്ന് രണ്ട് ഇയർബഡുകൾ പുറത്തെടുക്കുക.
2. Remove any insulating film from the charging contacts on the earbuds.
3. Place the earbuds back into the charging case and close the lid. This ensures they are charged and ready for initial pairing.

4.2 Pairing Instructions

1. Open the lid of the charging case. The earbuds will automatically turn on and interconnect with each other. They will then enter pairing mode, indicated by alternating red and blue lights on the earbuds.
2. On your mobile phone or Bluetooth device, turn on the Bluetooth function.
3. ഇതിനായി തിരയുക "BH-T10" in the list of available Bluetooth devices.
4. Select "BH-T10" to connect. Once connected, the earbud lights will turn off or show a steady blue light.

ഊഷ്മള നുറുങ്ങ്: If the earbuds are not turning on or are muted, place them back into the charging case and allow them to charge. Then, try the pairing process again. The red/blue lights on the earbuds will flash alternately when in pairing mode.

4.3 Troubleshooting Pairing Issues

• Earbuds Fail to Pair (Left/Right): If one earbud is muted or they fail to pair with each other, double-tap either earbud three times after powering on to enter TWS (True Wireless Stereo) pairing state. The blue light will flash quickly, and upon successful pairing, it will switch to alternating red/blue flashing for phone pairing.
• മാറുന്ന ഉപകരണങ്ങൾ: To connect to a new device, you must first turn off the Bluetooth on the previously connected device or delete "BH-T10" from its Bluetooth history. Then, search for "BH-T10" on the new device and connect.

An illustration showing the earbuds connecting seamlessly to a smartphone via Bluetooth 5.3. The image highlights features like longer transmission range, less power consumption, more stable connection, and lower latency.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1 പവർ ഓൺ/ഓഫ്

• പവർ ഓൺ: Open the charging case cover. The earbuds will automatically turn on. Alternatively, if off, long-press the touch key for 2 seconds.
• പവർ ഓഫ്: Place the earbuds back into the charging case and close the cover. They will automatically turn off. Earbuds will also turn off if disconnected from a device for 5 minutes, or if the battery voltage 3.1V-ന് താഴെയായി കുറയുന്നു.

5.2 സ്മാർട്ട് ടച്ച് നിയന്ത്രണങ്ങൾ

The Choebuds Pro TWS Earphones feature sensitive touch controls on each earbud. Refer to the table below for common operations:

An image displaying the various smart touch control functions available on the Choetech Choebuds Pro TWS Earbuds.

5.3 Adjustable Listening Modes (ANC)

The Choebuds Pro TWS Earphones offer three listening modes:

• സുതാര്യത മോഡ്: ഓഡിയോ കേൾക്കുമ്പോൾ നിങ്ങളുടെ ചുറ്റുപാടുകൾ കേൾക്കാൻ നിങ്ങളെ അനുവദിക്കുന്നു.
• ANC ON (Active Noise Cancellation): Significantly reduces external background noise for an immersive listening experience.
• ANC ഓഫാണ്: Disables active noise cancellation.

To switch between these modes, double-click the MFB button on the ഇടത് ഇയർബഡ്. The modes will cycle in the order: Transparency Mode → ANC ON → ANC OFF.

A diagram illustrating the adjustable listening modes of the Choetech Choebuds Pro TWS Earbuds: Transparency Mode, ANC ON, and ANC OFF.

6. ചാർജിംഗ്

6.1 ഇയർബഡുകൾ ചാർജ് ചെയ്യുന്നു

Place the earbuds into the charging case. They will automatically begin charging. The white light on the earbuds will remain on during charging and turn off when fully charged.

6.2 കേസ് ചാർജ് ചെയ്യൽ

Connect the charging case to a power source using the provided USB-C cable. The indicator lights on the front of the case will show the charging status:

• ചാർജിംഗ്: വെളുത്ത ലൈറ്റുകൾ മിന്നുന്നു.
• പൂർണ്ണമായി ചാർജ്ജ് ചെയ്‌തത്: All four white lights remain on simultaneously.
• കുറഞ്ഞ പവർ: One white light flashes on the left.
• Very Low Power (below 3.1-3.25V): വിളക്കുകൾ ഇല്ല.

An infographic illustrating the battery performance of the Choetech Choebuds Pro TWS Earbuds and charging case.

പ്രധാന കുറിപ്പ്: Please charge the case timely when it runs out of power. Otherwise, the earbuds may not turn off when placed back into the case, potentially remaining connected to your mobile phone.

7. പരിപാലനവും പരിചരണവും

• ചാർജിംഗ്: Always use a charger with an output voltage of DC 5V1A. Ensure the charger is certified by a formal manufacturer. Do not charge with a power adapter with current greater than 2A to avoid damaging the battery.
• ഇയർബഡുകൾ വൃത്തിയാക്കൽ: If you experience muffled or unclear sound, remove the ear caps and wipe the earbud's audio output hole and charging contacts with a cotton swab. If there is residual moisture, swing the earbud downwards several times to expel water or air dry for 1-2 hours.
• Cleaning Case: The charging cable and case are not waterproof. Do not use hot water for disinfection. Wipe the earbuds and case with a cloth containing alcohol or wet paper towels for surface stains.
• വാട്ടർ എക്സ്പോഷർ: While the earbuds are IPX7 water-resistant, if they are soaked in water, dry them thoroughly with a cloth before placing them back into the charging case. If accidentally dropped in water, retrieve them promptly and air dry for 2 hours.
• താപനില: Do not use the equipment at extreme ambient temperatures below -10°C or above 60°C.
• സംഭരണം: Do not leave the product idle for a long time. If unused for more than one month, charge and maintain it regularly to ensure normal functioning.
• പൊതുവായ മുൻകരുതലുകൾ: Do not expose the product to strong sunlight or fire. Do not clean with corrosive solvents. Do not insert any foreign objects into the earbuds. Do not attempt to disassemble the earbuds.

8. പ്രശ്‌നപരിഹാരം

8.1 പൊതുവായ പ്രശ്നങ്ങളും പരിഹാരങ്ങളും

• ഇയർബഡുകൾ കണക്റ്റുചെയ്യുന്നില്ല/ജോടിയാക്കുന്നില്ല: Ensure earbuds are charged. Try re-pairing as described in Section 4.2. Delete previous Bluetooth connections on your device.
• One earbud muted: Follow the TWS pairing troubleshooting steps in Section 4.3.
• Muffled/unclear sound: Clean earbud audio output holes and ear caps as described in Section 7.
• ഇയർബഡുകൾ ചാർജ് ചെയ്യുന്നില്ല: Clean the charging contacts on both earbuds and inside the case with a cotton swab. Ensure the charging cable and adapter are functioning correctly and meet specifications.

8.2 ഫാക്ടറി റീസെറ്റ്

നിങ്ങൾക്ക് സ്ഥിരമായ പ്രശ്നങ്ങൾ നേരിടുകയാണെങ്കിൽ, ഒരു ഫാക്ടറി റീസെറ്റ് അവ പരിഹരിച്ചേക്കാം:

1. Ensure the earbuds are paired with your phone.
2. Rapidly click the earbuds five times. The earbuds will automatically turn off and restart.
3. On your mobile phone, delete the previous Bluetooth pairing name "BH-T10" from your device's Bluetooth settings.
4. ഇതിനായി തിരയുക "BH-T10" again and reconnect.

9 സ്പെസിഫിക്കേഷനുകൾ

10. വാറൻ്റിയും പിന്തുണയും

Your Choetech Choebuds Pro TWS Earphones come with an 18-month local warranty. For any product inquiries, technical support, or warranty claims, please contact your local retailer or the official Choetech customer service. Keep your purchase receipt as proof of purchase for warranty purposes.

Additional extended warranty options may be available from third-party providers, such as 1-Year or 2-Year Extended Warranty by Salama Care.