അബാസ്ക് M18 4K ഡാഷ്‌ക്യാം ഉപയോക്തൃ മാനുവൽ

1. ആമുഖം

This manual provides detailed instructions for the installation, operation, and maintenance of your Abask M18 4K Dashcam. This dual-channel car camera system is designed to enhance driving safety by recording high-quality video footage from both the front and rear of your vehicle. It features 2160P (front) and 1080P (rear) recording, a wide 320° viewing angle, advanced night vision, G-Sensor, WDR technology, loop recording, and motion detection capabilities.

പാക്കേജ് ഉള്ളടക്കം

• 1 x Abask M18 Car Camera (Main Unit)
• 1 x പിൻ ക്യാമറ
• 1 x 32GB മൈക്രോ SD കാർഡ് (മുൻകൂട്ടി ചേർത്തത്)
• 1 x Car Charger (3.5M cable)
• 1 x Rear Camera Cable (6M)
• 1 x Mini USB Cable (0.5M)
• 1 x സക്ഷൻ കപ്പ് മൗണ്ട്
• 1 x ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)
• 1 x പശ മൗണ്ട്
• 1 x Pry Tool (for cable management)

2. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Abask M18 Dashcam system includes a main front camera unit with a 3-inch display and a separate rear camera. The front camera records in 4K (2160P) resolution, while the rear camera records in 1080P, providing comprehensive coverage of your vehicle's surroundings.

Image: Abask M18 4K Dashcam main unit, rear camera, and included 32GB Micro SD card. The main unit features a lens on the front and a screen on the back, with a suction cup mount and a Micro SD card shown separately.

പ്രധാന സവിശേഷതകൾ

• ഡ്യുവൽ ചാനൽ റെക്കോർഡിംഗ്: Simultaneous 4K (front) and 1080P (rear) recording.
• വിശാലമായ Viewഇൻ ആംഗിൾ: 170° front and 150° rear, totaling 320° coverage.
• 3 ഇഞ്ച് HD സ്‌ക്രീൻ: വ്യക്തമായതിന് viewing, മെനു നാവിഗേഷൻ.
• സൂപ്പർ നൈറ്റ് വിഷൻ: Enhanced low-light performance with F1.8 large aperture and WDR technology.
• ജി-സെൻസർ: വീഡിയോ സ്വയമേവ ലോക്ക് ചെയ്യുന്നു files upon impact.
• ലൂപ്പ് റെക്കോർഡിംഗ്: ഏറ്റവും പഴയത് ഓവർറൈറ്റ് ചെയ്യുന്നു fileതുടർച്ചയായ റെക്കോർഡിംഗ് ഉറപ്പാക്കാൻ എസ്.
• പാർക്കിംഗ് മോണിറ്റർ: Records automatically when motion or impact is detected while parked (requires hardwiring kit).
• Reversing Assist: Displays parking view with guidelines when reversing.

Image: Illustration of the dual channel recording feature. The image shows a car from the rear with text 'Front 4K' and 'Rear 1080P' indicating the recording resolutions for both cameras, capturing the road ahead and behind.

Image: Depiction of the Super Night Vision feature. A car is shown from the rear at night, with text highlighting 'Super Night Vision', 'F1.8 Large Aperture', 'WDR', and 'Sony IMX 335' indicating the technologies used for clear night recording.

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps to properly install your Abask M18 Dashcam system in your vehicle.

3.1 Install the Main Camera

1. Clean the area on your windshield where you intend to mount the dashcam.
2. Attach the suction cup mount to the main camera unit.
3. Securely mount the main camera on the front windshield, ensuring it does not obstruct your view.
4. Connect the car charger cable to the main camera and plug the other end into your vehicle's cigarette lighter socket for power.

3.2 Install the Rear Camera

There are two methods for installing the rear camera:

1. Method 1 (Internal): Paste the rear camera near the rear windshield inside the vehicle.
2. Method 2 (External): Install the camera near the license plate on the outside of the vehicle.

After mounting, connect the rear camera cable to the main camera unit. For the reversing assist function, connect the red wire of the rear camera cable to the positive pole of your vehicle's reverse lamp.

Image: Diagram illustrating the easy installation process for the main and rear cameras. It shows the main camera mounted on the front windshield and the rear camera installed at the back, with cables routed along the car's interior and connected to the cigarette lighter and reverse lamp.

3.3 കേബിൾ മാനേജ്മെന്റ്

Use the provided pry tool to carefully tuck the power and rear camera cables along the edges of your car's interior trim to keep them neat and out of the way, ensuring they do not interfere with driving.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

This section details the various functions and modes of your Abask M18 Dashcam.

4.1 അടിസ്ഥാന റെക്കോർഡിംഗ്

Once powered on, the dashcam will automatically begin recording. The front and rear cameras will record simultaneously. The 3-inch screen will display the live view from the cameras.

Image: Visual explanation of G-Sensor and Loop Recording. The top part shows a dashcam screen with a lock icon, indicating a locked video due to an accident. The bottom part illustrates loop recording, where older files are overwritten by new ones, with important files being protected.

4.2 ലൂപ്പ് റെക്കോർഡിംഗ്

ഡാഷ്‌ക്യാം തുടർച്ചയായി ചെറിയ സെഗ്‌മെന്റുകളിൽ വീഡിയോ റെക്കോർഡുചെയ്യുന്നു (ഉദാ. 1, 3, അല്ലെങ്കിൽ 5 മിനിറ്റ്). മെമ്മറി കാർഡ് നിറഞ്ഞു കഴിയുമ്പോൾ, ഏറ്റവും പഴയ അൺലോക്ക് ചെയ്ത വീഡിയോ files will be automatically overwritten by new recordings. This ensures uninterrupted recording without manual intervention.

4.3 G-Sensor (Accident Detection)

The built-in G-Sensor detects sudden impacts or collisions. When an event is detected, the current video segment is automatically locked and saved to prevent it from being overwritten by loop recording. These locked files serve as crucial evidence in case of an accident.

4.4 Parking Monitor & Motion Detection

When your vehicle is parked, the dashcam can automatically turn on and record video if it detects a collision (Parking Monitor) or motion (Motion Detection). This feature provides surveillance for your parked vehicle. കുറിപ്പ്: To utilize the 24-hour parking monitoring function, a hardwiring kit (sold separately) is required to provide continuous power to the dashcam from your car's fuse box.

Image: Illustration of the 24/7 Hour Parking Mode. It shows a car parked with a blue detection zone, indicating that the dashcam will automatically record if an impact is detected. A note clarifies that a hardwiring kit is needed for this function.

4.5 Reversing Assist

When the rear camera is correctly wired to your vehicle's reverse lamp, the dashcam screen will automatically display the rear view with parking guidelines when you engage reverse gear. This assists in safer parking maneuvers.

Image: Display of the Reversing Assist feature. The dashcam screen shows a clear rear view with colored parking guidelines (red, yellow, green) overlaid, assisting the driver in parking.

4.6 വൈഡ് ആംഗിൾ View

The dashcam provides a super wide-angle view of 170° for the front and 150° for the rear, offering a comprehensive understanding of the entire road situation and minimizing blind spots.

Image: Diagram illustrating the super wide-angle coverage. An aerial view of cars shows blue arcs representing the 170° front and 150° rear viewing angles, highlighting the extensive coverage provided by the dashcam.

5. പരിപാലനം

Proper maintenance ensures the longevity and optimal performance of your dashcam.

5.1 വൃത്തിയാക്കൽ

• Gently wipe the camera lenses with a soft, lint-free cloth to remove dust or smudges.
• Do not use abrasive cleaners or solvents, as they may damage the lenses or casing.

5.2 മെമ്മറി കാർഡ് മാനേജ്മെന്റ്

• Regularly format the Micro SD card (at least once a month) within the dashcam's settings to ensure optimal performance and prevent data corruption.
• Use a high-quality Class 10 or U3 Micro SD card for reliable recording. The dashcam supports up to 256GB.
• Avoid removing or inserting the Micro SD card while the dashcam is powered on to prevent data loss or card damage.

6. പ്രശ്‌നപരിഹാരം

If you encounter any issues with your Abask M18 Dashcam, refer to the following common problems and solutions.

• Dashcam does not power on:
  • Ensure the car charger is securely plugged into both the dashcam and the vehicle's cigarette lighter socket.
  • വാഹനത്തിന്റെ സിഗരറ്റ് ലൈറ്റർ സോക്കറ്റിൽ വൈദ്യുതി ലഭിക്കുന്നുണ്ടോ എന്ന് പരിശോധിക്കുക.
• Dashcam stops recording or freezes:
  • Format the Micro SD card within the dashcam's settings.
  • Ensure you are using a high-speed (Class 10 or U3) Micro SD card.
  • The card may be full; loop recording should manage this, but formatting can resolve issues.
• വീഡിയോ നിലവാരം മോശമാണ്:
  • ക്യാമറ ലെൻസുകൾ വൃത്തിയാക്കുക.
  • ലെൻസുകളിൽ നിന്ന് സംരക്ഷണ ഫിലിം നീക്കം ചെയ്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
  • Check the video resolution settings in the dashcam menu.
• Parking Monitor is not working:
  • Confirm that a hardwiring kit is installed and providing continuous power to the dashcam.
  • Check the Parking Monitor settings in the dashcam menu.
• Rear camera is not displaying:
  • Ensure the rear camera cable is securely connected to both the rear camera and the main unit.
  • Check for any damage to the rear camera cable.

7 സ്പെസിഫിക്കേഷനുകൾ

8. വാറൻ്റിയും പിന്തുണയും

Abask is committed to providing reliable products and customer satisfaction. If you encounter any problems during the use of your Abask M18 Dashcam, please do not hesitate to contact our customer support team. We aim to respond within 24 hours and provide a satisfactory solution.

Please refer to your purchase documentation or the Abask official webനിർദ്ദിഷ്ട വാറന്റി നിബന്ധനകൾക്കും ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾക്കും സൈറ്റ്.