Universal Audio SC-1

Universal Audio SC-1 Standard Condenser Microphone with Hemisphere Mic Modeling User Manual

മോഡൽ: SC-1

ആമുഖം

The Universal Audio SC-1 Standard Condenser Microphone is designed to capture high-quality audio for vocals and instruments. It features Hemisphere mic modeling technology, allowing users to access the authentic sound characteristics of various classic studio microphones through a dedicated plug-in. This manual provides essential information for the proper setup, operation, and maintenance of your SC-1 microphone.

ബോക്സിൽ എന്താണുള്ളത്

Upon unpacking your Universal Audio SC-1, please ensure all components are present:

  • SC-1 സ്റ്റാൻഡേർഡ് കണ്ടൻസർ മൈക്രോഫോൺ
  • Microphone Mount (often referred to as a mic clip or stand adapter)
  • Documentation (this user manual, warranty information)
Universal Audio SC-1 Standard Condenser Microphone with included microphone mount

Image: The SC-1 microphone shown with its standard microphone mount.

പ്രധാന സവിശേഷതകൾ

The SC-1 microphone offers several advanced features for professional audio recording:

  • Hemisphere Mic Modeling: Access a collection of classic studio condenser microphone sounds via the included plug-in.
  • Sound Shaping Controls: Utilize filter, proximity, and axis controls within the Hemisphere plug-in to fine-tune your recordings, even after tracking.
  • Ultra-Linear Circuit: Ensures smooth, professional recordings with minimal distortion.
  • വിപുലീകരിച്ച ഡൈനാമിക് ശ്രേണി: Provides clear results across both low and high frequencies.
  • ഉയർന്ന SPL കൈകാര്യം ചെയ്യൽ: Capable of recording loud sound sources, such as guitar cabinets, without distortion.
  • നീണ്ടുനിൽക്കുന്ന നിർമ്മാണം: Built with genuine Universal Audio craftsmanship for long-term reliability.

സജ്ജമാക്കുക

Follow these steps to set up your SC-1 microphone:

  1. മൈക്രോഫോൺ ഘടിപ്പിക്കുന്നു:

    Attach the SC-1 microphone to a standard microphone stand using the provided microphone mount. Ensure it is securely fastened.

    Universal Audio SC-1 microphone mounted on a stand

    Image: The SC-1 microphone attached to a microphone stand.

  2. Connecting to an Audio Interface:

    Connect the SC-1 to your audio interface or mixer using a balanced XLR cable. The SC-1 requires 48V phantom power, which must be enabled on your audio interface or mixer for the microphone to function.

  3. സോഫ്റ്റ്‌വെയർ ഇൻസ്റ്റാളേഷൻ:

    To utilize the Hemisphere mic modeling features, download and install the Universal Audio software and Hemisphere plug-in from the official Universal Audio website. Follow the on-screen instructions for installation and authorization.

  4. ഡ്രൈവർ ഇൻസ്റ്റാളേഷൻ:

    Ensure your audio interface drivers are up-to-date and correctly installed on your computer.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once the SC-1 is set up, you can begin recording:

  1. Enable Phantom Power:

    Activate 48V phantom power on the input channel of your audio interface or mixer to power the SC-1 microphone.

  2. Set Input Gain:

    Adjust the input gain on your audio interface to achieve an optimal recording level. Aim for a strong signal without clipping (distortion).

  3. മൈക്രോഫോണിന്റെ സ്ഥാനം:

    Position the microphone appropriately for the sound source. For vocals, typically 6-12 inches from the singer's mouth. For instruments, experiment with distance and angle to capture the desired tone.

    Person singing into the Universal Audio SC-1 microphone in a studio setting

    Image: A musician recording vocals with the SC-1 microphone.

  4. Using the Hemisphere Plug-in:

    Insert the Hemisphere mic modeling plug-in on the microphone's track in your Digital Audio Workstation (DAW). Select from various classic microphone models and adjust parameters like filter, proximity, and axis to shape the sound. This can be done in real-time during recording (with compatible UA Apollo interfaces) or after tracking.

Hemisphere Mic Modeling

The Hemisphere mic modeling technology is a core feature of the SC-1, providing access to a library of classic microphone emulations. This allows you to achieve the sonic characteristics of renowned studio microphones with a single hardware unit.

  • Authentic Emulations: The plug-in accurately models the frequency response, transient behavior, and other nuances of famous condenser microphones from manufacturers like Neumann and AKG.
  • Post-Tracking Adjustments: Unique to Hemisphere, you can change microphone models, adjust proximity effect, and alter the off-axis response even after your audio has been recorded. This provides significant flexibility in mixing.
  • Real-time Processing: When used with Universal Audio Apollo interfaces, the Hemisphere plug-in can be run in real-time with near-zero latency, allowing you to monitor and record with the modeled sound.

മെയിൻ്റനൻസ്

Proper care will ensure the longevity and optimal performance of your SC-1 microphone:

  • സംഭരണം: Store the microphone in a clean, dry environment, preferably in its original packaging or a protective case, when not in use. Avoid extreme temperatures and humidity.
  • വൃത്തിയാക്കൽ: Gently wipe the exterior of the microphone with a soft, dry cloth. Do not use liquid cleaners or solvents, as these can damage the finish or internal components. Avoid touching the microphone capsule.
  • കൈകാര്യം ചെയ്യൽ: മൈക്രോഫോൺ ശ്രദ്ധയോടെ കൈകാര്യം ചെയ്യുക. അത് താഴെയിടുകയോ ശക്തമായ ആഘാതങ്ങൾക്ക് വിധേയമാക്കുകയോ ചെയ്യരുത്, കാരണം ഇത് അതിന്റെ സൂക്ഷ്മമായ ആന്തരിക ഘടകങ്ങളെ ബാധിച്ചേക്കാം.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues with your SC-1 microphone, refer to the following common problems and solutions:

പ്രശ്നംസാധ്യമായ കാരണം / പരിഹാരം
സൗണ്ട് ഔട്ട്പുട്ട് ഇല്ല
  • Ensure 48V phantom power is enabled on your audio interface/mixer.
  • Check that the XLR cable is securely connected at both ends.
  • Verify input gain is set appropriately on your audio interface.
  • Confirm the correct input is selected in your DAW.
Low Volume or Weak Signal
  • Increase the input gain on your audio interface.
  • Ensure the microphone is positioned close enough to the sound source.
  • Check for faulty XLR cables.
വികലമായ ശബ്ദം
  • Reduce the input gain on your audio interface to prevent clipping.
  • Ensure the microphone is not overloaded by an excessively loud source (though SC-1 has high SPL handling, extreme levels can still cause issues).
Hemisphere Plug-in Not Working
  • Verify the Hemisphere plug-in is correctly installed and authorized.
  • Ensure your DAW is scanning for plug-ins in the correct directories.
  • Check for software updates for both your DAW and Universal Audio software.

സ്പെസിഫിക്കേഷനുകൾ

Detailed technical specifications for the Universal Audio SC-1 Standard Condenser Microphone:

  • മോഡലിൻ്റെ പേര്: എസ്‌സി-1
  • മൈക്രോഫോൺ ഫോം ഘടകം: വലിയ ഡയഫ്രം
  • പോളാർ പാറ്റേൺ: ഏകദിശ
  • കണക്റ്റിവിറ്റി ടെക്നോളജി: XLR
  • കണക്റ്റർ തരം: XLR
  • ഊർജ്ജ സ്രോതസ്സ്: Corded Electric (requires 48V Phantom Power)
  • ഫ്രീക്വൻസി പ്രതികരണം: 20 KHz (Note: This typically refers to the upper limit; the full range is commonly 20Hz-20kHz)
  • പ്രതിരോധം: 200 ഓം
  • സിഗ്നൽ-ടു-നോയിസ് അനുപാതം: 70 ഡി.ബി
  • ഇനത്തിൻ്റെ ഭാരം: 363 ഗ്രാം (12.8 ഔൺസ്)
  • ഉൽപ്പന്ന അളവുകൾ (L x W x H): 10.7 x 8.8 x 4 ഇഞ്ച്
  • നിറം: വെള്ള
  • മെറ്റീരിയൽ: മോഡലിംഗ് (Refers to the Hemisphere mic modeling technology, not the physical construction material)
  • ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ: മൈക്രോഫോൺ
  • നിർമ്മാതാവ്: യൂണിവേഴ്സൽ ഓഡിയോ
  • ഇനം മോഡൽ നമ്പർ: MIC-UASC-1
  • UPC: 819937003714

വാറൻ്റിയും പിന്തുണയും

For warranty information, technical support, and additional resources, please visit the official Universal Audio website. You can find detailed warranty terms, product registration, and contact information for customer service there.

ഓൺലൈൻ ഉറവിടങ്ങൾ: www.uaudio.com/support

അനുബന്ധ രേഖകൾ - എസ്‌സി-1

പ്രീview യൂണിവേഴ്സൽ ഓഡിയോ SC-1 സ്റ്റാൻഡേർഡ് കണ്ടൻസർ മൈക്രോഫോൺ ഉപയോക്തൃ ഗൈഡ്
യൂണിവേഴ്സൽ ഓഡിയോ എസ്‌സി-1 സ്റ്റാൻഡേർഡ് കണ്ടൻസർ മൈക്രോഫോണിനായുള്ള ഉപയോക്തൃ ഗൈഡ്, അതിന്റെ സവിശേഷതകൾ, ഹെമിസ്ഫിയർ മൈക്ക് മോഡലിംഗിനായുള്ള സജ്ജീകരണം, സാങ്കേതിക സവിശേഷതകൾ എന്നിവ വിശദീകരിക്കുന്നു.
പ്രീview Universal Audio Volt 476P Hardware Manual: Professional Audio Interface
This manual provides comprehensive guidance on the Universal Audio Volt 476P hardware, covering its features, connectivity, operation, and troubleshooting for professional audio recording and production.
പ്രീview Universal Audio Volt 876 Hardware Manual
This comprehensive hardware manual for the Universal Audio Volt 876 USB audio interface provides detailed information on setup, connections, front and rear panel operations, modes, troubleshooting, and technical specifications. Learn how to get the most out of your Volt 876 for professional audio recording.
പ്രീview യൂണിവേഴ്സൽ ഓഡിയോ അപ്പോളോ ട്വിൻ എക്സ് ജെൻ 2 ഹാർഡ്‌വെയർ മാനുവൽ: തണ്ടർബോൾട്ട് 3 ഓഡിയോ ഇന്റർഫേസ് ഗൈഡ്
റിയൽടൈം യുഎഡി പ്രോസസ്സിംഗ് ഉള്ള ഈ തണ്ടർബോൾട്ട് 3 ഓഡിയോ ഇന്റർഫേസിനായുള്ള സവിശേഷതകൾ, സജ്ജീകരണം, നിയന്ത്രണങ്ങൾ, സ്പെസിഫിക്കേഷനുകൾ, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ വിശദീകരിക്കുന്ന യൂണിവേഴ്സൽ ഓഡിയോ അപ്പോളോ ട്വിൻ എക്സ് ജെൻ 2-നുള്ള സമഗ്രമായ ഹാർഡ്‌വെയർ മാനുവൽ.
പ്രീview UAFX Teletronix LA-2A Studio Compressor Pedal: Manual and Specifications
Comprehensive operating instructions, overview, controls, specifications, and safety information for the Universal Audio UAFX Teletronix LA-2A Studio Compressor pedal.
പ്രീview UAFX ലയൺ '68 സൂപ്പർ ലീഡ് Amp: സമഗ്രമായ മാനുവൽ, ഓപ്പറേഷൻ ഗൈഡ്
യൂണിവേഴ്സൽ ഓഡിയോ UAFX ലയൺ '68 സൂപ്പർ ലീഡിനായുള്ള വിശദമായ പ്രവർത്തന നിർദ്ദേശങ്ങൾ Amp ഇഫക്‌ട്‌സ് പെഡൽ. അതിന്റെ സവിശേഷതകൾ, നിയന്ത്രണങ്ങൾ, മോഡലുകൾ, കണക്ഷനുകൾ എന്നിവയെക്കുറിച്ചും മറ്റും കൂടുതലറിയുക.