1. ആമുഖം
This manual provides essential information for the installation, operation, and maintenance of your AZZA PSAZ-1000P 80+ Platinum 1000W ATX 3.0 Power Supply. Please read this manual thoroughly before installation to ensure proper and safe usage of the product.
The AZZA PSAZ-1000P is a high-performance, fully modular power supply designed to meet the demands of modern computing systems, featuring 80 PLUS Platinum efficiency and ATX 3.0 compliance.
2 സുരക്ഷാ വിവരങ്ങൾ
- ചെയ്യരുത് പവർ സപ്ലൈ യൂണിറ്റ് തുറക്കുക. ഉയർന്ന വോളിയംtagയൂണിറ്റ് പ്ലഗ് ഊരിവെച്ചിരിക്കുമ്പോഴും, es അകത്ത് ഉണ്ടാകും.
- താപ സ്രോതസ്സുകളിൽ നിന്നും നേരിട്ടുള്ള സൂര്യപ്രകാശത്തിൽ നിന്നും അകന്ന്, നന്നായി വായുസഞ്ചാരമുള്ള സ്ഥലത്ത് വൈദ്യുതി വിതരണം സ്ഥാപിക്കുക.
- വൈദ്യുതി വിതരണം ഒരു ഗ്രൗണ്ടഡ് ഇലക്ട്രിക്കൽ ഔട്ട്ലെറ്റുമായി ബന്ധിപ്പിച്ചിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
- Use only the modular cables provided with your AZZA PSAZ-1000P power supply. Using incompatible cables may damage the PSU or connected components.
- Before installation or maintenance, always disconnect the power cord from the wall outlet.
- വൈദ്യുതി വിതരണത്തിൽ ഈർപ്പം അല്ലെങ്കിൽ തീവ്രമായ താപനില ഏൽക്കുന്നത് ഒഴിവാക്കുക.
3. പാക്കേജ് ഉള്ളടക്കം
നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:
- AZZA PSAZ-1000P Power Supply Unit
- Modular Cable Set (including 16-pin PCIe Gen 5.0 cable)
- എസി പവർ കോർഡ്
- മൗണ്ടിംഗ് സ്ക്രൂകൾ
- ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)
4. ഉൽപ്പന്ന സവിശേഷതകൾ
The AZZA PSAZ-1000P power supply offers advanced features for reliable and efficient performance:
- Complies with ATX12V V3.0 standard
- Efficiency ≥ 92% at typical load (80 PLUS Platinum certified)
- Eco semi-fanless fan control switch for quiet operation at low loads
- 120mm smart hydraulic bearing (HYB) fan for optimal cooling and durability
- LLC Full Bridge Topology with DC-DC module design for stable power delivery
- Support for PCIe Gen 5.0 graphics cards with a high-quality native 16-pin cable supporting 600W output
- Complete protection features: Over Current Protection (OCP), Over Voltage Protection (OVP), Over Power Protection (OPP), Short Circuit Protection (SCP), Over Temperature Protection (OTP), Under Voltagഇ പ്രൊട്ടക്ഷൻ (UVP)
- Fully modular design for improved cable management and airflow
5. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
നിങ്ങളുടെ പവർ സപ്ലൈ ഇൻസ്റ്റാൾ ചെയ്യുന്നതിന് ഈ ഘട്ടങ്ങൾ പാലിക്കുക:
- നിങ്ങളുടെ പിസി കേസ് തയ്യാറാക്കുക: Ensure your PC case is compatible with ATX power supplies. Remove the side panel of your computer case.
- പവർ സപ്ലൈ മൌണ്ട് ചെയ്യുക: Carefully slide the AZZA PSAZ-1000P into the designated power supply bay in your PC case. Secure it with the provided mounting screws from the rear of the case.
- മോഡുലാർ കേബിളുകൾ ബന്ധിപ്പിക്കുക: Identify the necessary cables for your motherboard, CPU, graphics card(s), and storage devices. Connect them to the corresponding ports on the power supply unit. Refer to the image below for port identification.

This image displays the AZZA PSAZ-1000P power supply unit from an isometric view. The modular cable connection panel is visible on the right side, labeled with 'M/B 18+10P' (Motherboard), 'CPU & PCI-E', 'SATA & MOLEX' (for storage and peripherals), and '+12VHPWR' (for high-power PCIe Gen 5.0 graphics cards) ports. The top features a fan grille, and the side shows '1000W' and 'AZZA' branding.
- Motherboard Connection: Connect the 24-pin ATX cable (M/B 18+10P) to your motherboard.
- സിപിയു പവർ: Connect the 4+4 pin or 8-pin EPS12V cable(s) from the 'CPU & PCI-E' ports to your motherboard's CPU power connector(s).
- ഗ്രാഫിക്സ് കാർഡ് പവർ: Connect the appropriate PCIe cables (6+2 pin or the 16-pin 12VHPWR cable for Gen 5.0 GPUs) from the 'CPU & PCI-E' or '+12VHPWR' ports to your graphics card(s). Ensure the 16-pin connector is fully seated if used.
- സംഭരണവും അനുബന്ധ ഉപകരണങ്ങളും: Connect SATA and Molex cables from the 'SATA & MOLEX' ports to your hard drives, SSDs, optical drives, and other peripherals.
- കേബിൾ മാനേജുമെന്റ്: നിങ്ങളുടെ കേസിനുള്ളിലെ വായുപ്രവാഹവും സൗന്ദര്യവും മെച്ചപ്പെടുത്തുന്നതിന് കേബിളുകൾ വൃത്തിയായി റൂട്ട് ചെയ്യുക.
- എസി പവർ ബന്ധിപ്പിക്കുക: Once all internal connections are secure, connect the AC power cord to the power supply and then to a wall outlet.
6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
After installation, ensure the power switch on the rear of the power supply is in the 'ON' position. You can then power on your computer using the case's power button.
Eco Semi-Fanless Mode
The AZZA PSAZ-1000P features an Eco semi-fanless mode, controlled by a switch on the power supply. When enabled, the fan will remain off during low to moderate loads for silent operation. The fan will automatically activate when the load increases or the internal temperature reaches a certain threshold to maintain optimal cooling. Disabling this mode will cause the fan to operate continuously, adjusting its speed based on load and temperature.
7. പരിപാലനം
ശരിയായ അറ്റകുറ്റപ്പണി നിങ്ങളുടെ വൈദ്യുതി വിതരണത്തിന്റെ ദീർഘായുസ്സും മികച്ച പ്രകടനവും ഉറപ്പാക്കുന്നു:
- പൊടി നീക്കം: Periodically clean the exterior of the power supply and its fan grille to prevent dust buildup. Use compressed air to gently clear dust from the fan blades and vents. Always disconnect the power supply from the wall outlet before cleaning.
- കേബിൾ പരിശോധന: Occasionally check all modular cable connections to ensure they are securely seated.
- വെൻ്റിലേഷൻ: Ensure that the power supply's intake and exhaust vents are not obstructed, allowing for proper airflow.
8. പ്രശ്നപരിഹാരം
നിങ്ങളുടെ വൈദ്യുതി വിതരണത്തിൽ പ്രശ്നങ്ങൾ നേരിടുകയാണെങ്കിൽ, ഇനിപ്പറയുന്ന പൊതുവായ ട്രബിൾഷൂട്ടിംഗ് ഘട്ടങ്ങൾ പരിശോധിക്കുക:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| സിസ്റ്റം പവർ ഓണാക്കുന്നില്ല. |
|
|
| സിസ്റ്റം ഓൺ ആവുന്നു, പക്ഷേ ഉടൻ തന്നെ ഷട്ട് ഡൗൺ ആകും. |
|
|
| Fan is not spinning (in Eco mode). |
|
|
If the problem persists after trying these steps, please contact AZZA customer support.
9 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡലിൻ്റെ പേര് | PSAZ-1000P |
| വാട്ട്tage | 1000W |
| കാര്യക്ഷമത | 80 PLUS Platinum (≥ 92% typical load) |
| ഫോം ഫാക്ടർ | ATX |
| ATX സ്റ്റാൻഡേർഡ് | ATX12V V3.0 |
| തണുപ്പിക്കൽ രീതി | Air (120mm Hydraulic Bearing Fan) |
| ഫാൻ നിയന്ത്രണം | Eco semi-fanless switch |
| മോഡുലാർ | പൂർണ്ണമായും മോഡുലാർ |
| PFC | സജീവമായ PFC |
| സംരക്ഷണ സവിശേഷതകൾ | OCP, OVP, OPP, SCP, OTP, UVP |
| അളവുകൾ (L x W x H) | 5 x 8.5 x 13.4 ഇഞ്ച് |
| ഭാരം | 7.35 പൗണ്ട് (3.34 കിലോഗ്രാം) |
| അനുയോജ്യമായ ഉപകരണങ്ങൾ | പേഴ്സണൽ കമ്പ്യൂട്ടർ |
10. വാറൻ്റിയും പിന്തുണയും
AZZA products are manufactured to the highest quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the official AZZA webസൈറ്റിൽ പ്രവേശിക്കുക അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ പിന്തുണയുമായി നേരിട്ട് ബന്ധപ്പെടുക.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please visit the AZZA official webസൈറ്റ് അല്ലെങ്കിൽ അവരുടെ പിന്തുണാ ടീമിനെ ബന്ധപ്പെടുക.