അക്യുടൈം SNC4198M സോണിക് LED വാച്ച് യൂസർ മാനുവൽ

ആമുഖം

This manual provides instructions for the Accutime SNC4198M Sonic LED Watch. Please read this manual carefully before using your watch to ensure proper operation and to understand its features.

Figure 1: Accutime SNC4198M Sonic LED Watch, front view showing the digital display and blue strap with Sonic characters.

സജ്ജമാക്കുക

അൺബോക്സിംഗും പ്രാരംഭ പരിശോധനയും

Carefully remove the watch from its packaging. Inspect the watch for any visible damage. Ensure all components are present.

സ്ട്രാപ്പ് ക്രമീകരിക്കുന്നു

The acrylic strap measures approximately 21.7 cm in length and features 7 adjustment holes. Adjust the strap to fit comfortably on the wrist. The strap is designed to be soft and flexible.

Figure 2: The Accutime SNC4198M Sonic LED Watch worn on a wrist, demonstrating its fit and digital display.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The watch features a digital LED display that shows time (hours, minutes), seconds, month, and day. It supports both 12-hour and 24-hour time formats.

പ്രദർശിപ്പിക്കുന്ന സമയം

To display the time, press the button on the side of the watch case. The LED display will illuminate for a few seconds and then turn off automatically to conserve battery life.

സമയവും തീയതിയും ക്രമീകരിക്കുന്നു

All settings are adjusted using the two buttons located on the right side of the watch case.

1. ആക്‌സസ് സെറ്റിംഗ് മോഡ്: Press and hold the top button for approximately 3 seconds until the hour digits begin to flash.
2. സമയം ക്രമീകരിക്കുക: While the hour digits are flashing, press the top button repeatedly to advance the hour. Press the bottom button to confirm the hour and move to minute setting.
3. മിനിറ്റ് ക്രമീകരിക്കുക: While the minute digits are flashing, press the top button repeatedly to advance the minutes. Press the bottom button to confirm the minutes and move to month setting.
4. മാസം ക്രമീകരിക്കുക: While the month digits are flashing, press the top button repeatedly to advance the month. Press the bottom button to confirm the month and move to day setting.
5. ദിവസം ക്രമീകരിക്കുക: While the day digits are flashing, press the top button repeatedly to advance the day. Press the bottom button to confirm the day and move to year setting (if applicable, though typically not on this model).
6. Select 12/24-Hour Format: After setting the date, you may be prompted to select between 12-hour (AM/PM) or 24-hour format. Use the top button to toggle and the bottom button to confirm.
7. ക്രമീകരണ മോഡിൽ നിന്ന് പുറത്തുകടക്കുക: After confirming the last setting, the watch will automatically exit setting mode, or you can press and hold the bottom button for a few seconds.

ചിത്രം 3: ക്ലോസപ്പ് view of the watch case, highlighting the two control buttons on the right side used for setting time and date.

മെയിൻ്റനൻസ്

വൃത്തിയാക്കൽ

Wipe the watch with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials, as these can damage the watch's finish or strap.

ബാറ്ററി വിവരങ്ങൾ

The watch is powered by an integrated CR2032 button cell battery. This battery is not rechargeable and cannot be replaced by the user. The LED display is designed to turn off quickly to ensure a long battery life.

ജല പ്രതിരോധം

This watch is not specified as water-resistant. Avoid exposing it to water, moisture, or extreme temperatures to prevent damage.

ട്രബിൾഷൂട്ടിംഗ്

• ഡിസ്പ്ലേ പ്രകാശിക്കുന്നില്ല:

  Ensure the button is pressed firmly. If the display still does not light up, the battery may be depleted. As the battery is not replaceable, the watch may need to be replaced.

• തെറ്റായ സമയം/തീയതി:

  Refer to the "Setting Time and Date" section to re-adjust the watch settings.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

Information regarding specific warranty terms and support contacts is not provided in this manual. For warranty claims or technical assistance, please refer to the product packaging or contact your retailer.