ഹൈഗർ HG097-50W ചെറിയ അക്വേറിയം ഹീറ്റർ ഉപയോക്തൃ മാനുവൽ

ആമുഖം

Thank you for choosing the hygger HG097-50W Small Aquarium Heater. This submersible heater is designed to maintain a stable and appropriate temperature for your aquatic pets in tanks up to 10 gallons. It features an external temperature controller, an LED display, and multiple safety protections to ensure a safe and comfortable environment for your fish or turtles.

സുരക്ഷാ നിർദ്ദേശങ്ങൾ

• ഹീറ്റർ എപ്പോഴും പൂർണ്ണമായും മുങ്ങി in water before plugging it into a power outlet.
• Do not operate the heater if the power cord or plug is damaged.
• Unplug the heater from the power source before performing any maintenance, cleaning, or when handling the aquarium water.
• Allow the heater to cool down for 10-20 minutes after unplugging before removing it from the water to prevent burns or damage.
• Keep the external controller dry and away from water.
• This heater is suitable for both freshwater and saltwater aquariums.

പാക്കേജ് ഉള്ളടക്കം

• 1 x hygger HG097-50W Small Aquarium Heater
• 1 x External Temperature Controller (integrated with power cord)
• 2 x Suction Cups (pre-installed)
• 1 x ഉപയോക്തൃ മാനുവൽ

ഉൽപ്പന്ന സവിശേഷതകൾ

• കോംപാക്റ്റ് ഡിസൈൻ: Slim, flat profile (4.6''x 2.7''x 0.9'') ideal for small and shallow tanks, including turtle habitats.
• ക്രമീകരിക്കാവുന്ന താപനില: External controller allows setting temperatures from 59-93°F (15-34°C) with 1°F accuracy.
• LED ഡിസ്പ്ലേ: Shows real-time water temperature and set temperature. Red light indicates heating, green light indicates target temperature reached.
• അമിത ചൂടാക്കൽ സംരക്ഷണം: Automatically stops heating and flashes 'HH' error code if water temperature exceeds 93°F.
• Out of Water Protection: Automatically shuts off and flashes 'Er' error code if water level is too low.
• പവർ-ഓഫ് മെമ്മറി പ്രവർത്തനം: Retains the last temperature setting after a power interruption.
• നീണ്ടുനിൽക്കുന്ന നിർമ്മാണം: Made with heat-resistant ABS protective shell, nickel-chromium heating wire, and non-corrosive quartz glass.

സജ്ജമാക്കുക

1. ഹീറ്റർ അൺപാക്ക് ചെയ്യുക: Carefully remove the heater and its components from the packaging.
2. പ്ലെയ്‌സ്‌മെന്റ് തിരഞ്ഞെടുക്കുക: The heater can be placed vertically or horizontally at the bottom of the aquarium. Ensure it is fully submerged in water.
3. Secure with Suction Cups: Use the pre-installed suction cups to firmly attach the heater to the inner wall or bottom of your tank.
4. പവറിലേക്ക് ബന്ധിപ്പിക്കുക: Plug the power cord into a standard AC 110-120V/60Hz electrical outlet.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. പവർ ഓൺ: Once plugged in and fully submerged, the LED display on the heater will show the current water temperature.
2. താപനില സജ്ജമാക്കുക: Use the 'SET' button on the external controller to adjust the desired temperature. Each press will cycle through the available temperature range (59-93°F). The display will blink to indicate you are in setting mode.
3. ക്രമീകരണം സ്ഥിരീകരിക്കുക: Stop pressing the button when your desired temperature is displayed. The heater will automatically save the setting after a few seconds of inactivity.
4. ചൂടാക്കൽ സൂചകം: A red light on the heater's display indicates that the heater is actively warming the water.
5. Temperature Reached Indicator: A green light on the heater's display indicates that the water has reached the set temperature and the heater is maintaining it.
6. മെമ്മറി പ്രവർത്തനം: The heater will remember your last set temperature even after a power outage, eliminating the need to reset it.

സുരക്ഷാ സവിശേഷതകൾ

• അമിത ചൂടാക്കൽ സംരക്ഷണം: If the water temperature exceeds 93°F, the heater will automatically stop heating and display an 'HH' error code. It will resume normal operation once the temperature drops to a safe level.
• Out of Water Protection: If the water level drops below the minimum required for full submersion, or if the heater is exposed to air, it will automatically shut off and display an 'Er' error code to prevent dry burning.

മെയിൻ്റനൻസ്

Regular cleaning of your heater is essential for optimal performance and longevity.

1. അൺപ്ലഗ് ചെയ്‌ത് തണുപ്പിക്കുക: Always unplug the heater from the power outlet and allow it to cool in the water for 10-20 minutes before attempting to remove it.
2. Remove from Tank: Carefully remove the cooled heater from the aquarium.
3. ഉപരിതലം വൃത്തിയാക്കുക: Gently wipe the heater's surface with a soft cloth to remove any algae or mineral buildup. For stubborn deposits, a soft brush can be used. Avoid abrasive cleaners or harsh chemicals.
4. വീണ്ടും ഇൻസ്റ്റാൾ ചെയ്യുക: Once clean, place the heater back into the aquarium, ensuring it is fully submerged, and then plug it back in.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റി & പിന്തുണ

The hygger HG097-50W Small Aquarium Heater comes with a 12 മാസ വാറൻ്റി വാങ്ങിയ തീയതി മുതൽ. സാധാരണ ഉപയോഗത്തിലുള്ള നിർമ്മാണ വൈകല്യങ്ങളും തകരാറുകളും ഈ വാറന്റി ഉൾക്കൊള്ളുന്നു.

For technical support, warranty claims, or any questions regarding your product, please contact hygger customer service through the retailer where you purchased the product or visit the official hygger webബന്ധപ്പെടാനുള്ള വിവരങ്ങൾക്കുള്ള സൈറ്റ്.