EMKE Electric Towel Warmer with Thermostatic Heating Element

1. ആമുഖം

This manual provides essential information for the safe installation, operation, and maintenance of your EMKE Electric Towel Warmer. Please read these instructions carefully before installation and use, and retain them for future reference.

The EMKE Electric Towel Warmer is designed to provide warmth for towels and contribute to the heating of your bathroom space. It features a thermostatic heating element and a timer function for efficient and convenient use.

2. സുരക്ഷാ നിർദ്ദേശങ്ങൾ

• ഇലക്ട്രിക്കൽ സുരക്ഷ: Always disconnect the power supply before any installation, maintenance, or cleaning. Installation must be performed by a qualified electrician in accordance with local regulations.
• ജലസാമീപ്യം: This appliance has an IP44 splash protection rating, making it suitable for use in humid environments. However, do not immerse the unit in water. Ensure it is installed at a safe distance from water sources like bathtubs or showers, as specified by local electrical codes.
• താപനില: The surface of the towel warmer can become hot during operation. Avoid prolonged direct contact to prevent burns. Supervise children and individuals with reduced physical, sensory, or mental capabilities.
• ഉദ്ദേശിച്ച ഉപയോഗം: This appliance is designed for drying towels and providing supplementary heat in bathrooms. Do not use it for purposes other than its intended use.
• വെൻ്റിലേഷൻ: Ensure adequate ventilation around the unit to prevent overheating. Do not cover the towel warmer with items other than towels.
• നാശം: Do not operate the appliance if the power cord or plug is damaged, or if the unit has been dropped or damaged in any way. Contact customer support for assistance.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview ഫീച്ചറുകളും

The EMKE Electric Towel Warmer is constructed from low-carbon steel (SPCC) for excellent thermal conductivity and durability. It features a modern design with flat tubes and an adjustable wall distance for flexible installation.

പ്രധാന സവിശേഷതകൾ:

• തെർമോസ്റ്റാറ്റിക് നിയന്ത്രണം: Allows precise temperature adjustment from 30℃ to 70℃.
• ടൈമർ പ്രവർത്തനം: Programmable operation for 2, 4, 6, or 8 hours.
• High Thermal Conductivity: Efficiently heats towels and the surrounding space.
• IP44 സംരക്ഷണം: Suitable for bathroom environments, protected against splashing water.
• Adjustable Wall Distance: Provides flexibility during installation (99-115mm from wall to outer edge).
• Pre-filled: Comes pre-installed with the heating rod and antifreeze for convenience.

Image 3.1: EMKE Electric Towel Warmer (762x500mm) installed in a bathroom.

Image 3.2: Features of the EMKE Electric Towel Warmer, including electrical operation, high thermal conductivity, retractable spiral cable, and adjustable wall distance (99-115mm).

Image 3.3: Illustration of high thermal conductivity, showing how the radiator heats the room and dries towels.

Image 3.4: Details on advanced welding technology for strong seams, high-quality SPCC steel with environmental protection paint for water, rust, and corrosion resistance, adjustable wall distance (99-115mm), and wide flat tubes for faster drying.

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

The electric towel warmer comes pre-installed with the heating rod and antifreeze. You only need to install the thermostatic head and mount the unit to the wall.

4.1 ഉൾപ്പെടുത്തിയ ആക്സസറികൾ:

Image 4.1: Included accessories for installation: 4 supports, 4 rubber rings, 4 long screws, and 4 small screws.

4.2 ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ:

1. തയ്യാറാക്കൽ: Ensure the main power supply to the installation area is disconnected before beginning.
2. മൗണ്ടിംഗ് ലൊക്കേഷൻ: Choose a suitable wall location, ensuring it is within reach of a power outlet and adheres to local electrical safety regulations regarding distance from water sources.
3. അടയാളപ്പെടുത്തൽ: Use the provided template or measure carefully to mark the drilling points for the wall brackets.
4. ഡ്രില്ലിംഗ്: Drill holes at the marked points and insert wall plugs (if required for your wall type).
5. ബ്രാക്കറ്റുകൾ അറ്റാച്ചുചെയ്യുക: നൽകിയിരിക്കുന്ന സ്ക്രൂകൾ ഉപയോഗിച്ച് മൗണ്ടിംഗ് ബ്രാക്കറ്റുകൾ ചുമരിൽ ഉറപ്പിക്കുക.
6. Position Towel Warmer: Carefully lift the towel warmer and align it with the wall brackets. The electric heating rod is pre-installed on the left side and must always be mounted at the bottom edge of the radiator.
7. സുരക്ഷിത യൂണിറ്റ്: Fasten the towel warmer to the brackets.
8. Install Thermostatic Head: Attach the thermostatic control head to the heating rod.
9. അന്തിമ പരിശോധന: Verify that the unit is securely mounted and all connections are tight.
10. പവർ കണക്ഷൻ: Only after confirming the completion of installation, connect the power plug to a suitable electrical outlet and restore power.

Image 4.2: Easy installation process, showing the pre-installed immersion heater and antifreeze, and connecting the thermostat.

Image 4.3: Important installation note: The heating rod must always be mounted at the bottom edge of the radiator. Incorrect mounting positions are shown with crosses.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Your EMKE Electric Towel Warmer is equipped with a user-friendly thermostatic control for setting temperature and timer functions.

5.1 Thermostat Controls:

ചിത്രം 5.1: വിശദമായത് view of the electric heating rod thermostat, showing temperature display and control buttons.

Image 5.2: Detailed diagram of the thermostat controls, highlighting buttons for mode change, power, temperature adjustment (decrease/increase), and timer settings (2H/4H/6H/8H). It also shows the chronometer mode which runs at maximum power and maintains 65°C.

5.2 പ്രവർത്തനങ്ങൾ:

• പവർ ബട്ടൺ: യൂണിറ്റ് ഓൺ / ഓഫ് ചെയ്യുന്നതിന് അമർത്തുക.
• താപനില ക്രമീകരണം: Use the '+' and '-' buttons to set the desired temperature between 30℃ and 70℃. The current temperature setting will be displayed.
• ടൈമർ പ്രവർത്തനം: Press the timer button to cycle through available timer settings: 2 hours, 4 hours, 6 hours, or 8 hours. The unit will operate for the selected duration and then turn off automatically.
• Chronometer Mode: This mode allows the radiator to function at maximum power and maintain a temperature of 65℃. Refer to the thermostat diagram for the specific button to activate this mode.

6. പരിപാലനം

പതിവ് അറ്റകുറ്റപ്പണികൾ നിങ്ങളുടെ ടവൽ വാമറിന്റെ ദീർഘായുസ്സും കാര്യക്ഷമമായ പ്രവർത്തനവും ഉറപ്പാക്കുന്നു.

• വൃത്തിയാക്കൽ: Disconnect the power supply before cleaning. Use a soft, damp cloth to wipe the surface of the towel warmer. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
• പരിശോധന: Periodically check the power cord and plug for any signs of damage. Ensure all mounting screws are tight and the unit is securely fixed to the wall.
• ഉപയോക്തൃ സേവനയോഗ്യമായ ഭാഗങ്ങൾ ഇല്ല: The internal components of the heating element are not user-serviceable. Do not attempt to open or repair the unit yourself.

7. പ്രശ്‌നപരിഹാരം

If you encounter any issues with your EMKE Electric Towel Warmer, please refer to the following common troubleshooting steps:

If the problem persists after attempting these solutions, please contact EMKE customer support.

8 സ്പെസിഫിക്കേഷനുകൾ

Image 8.1: Technical drawing showing detailed dimensions (in mm) of the towel warmer, including height, width, bar spacing, and wall mounting points.

9. വാറൻ്റിയും പിന്തുണയും

EMKE products are manufactured to high-quality standards. For warranty information, please refer to the terms and conditions provided at the time of purchase or visit the official EMKE webസൈറ്റ്.

If you require technical assistance, have questions about installation, or need to report a fault, please contact EMKE customer support through the retailer where you purchased the product or via the official EMKE contact channels.

Please have your product model (762x500mm 400W) and purchase details ready when contacting support.