ലൈറ്റ്ബേണും റോട്ടറി ആക്സിസ് ഇൻസ്ട്രക്ഷൻ മാനുവലും ഉള്ള OMTech 50W ഫൈബർ ലേസർ എൻഗ്രേവർ

1. ആമുഖം

This manual provides essential instructions for the safe and efficient operation, setup, maintenance, and troubleshooting of your OMTech 50W Fiber Laser Engraver with LightBurn and Rotary Axis. Please read this manual thoroughly before operating the machine.

Figure 1: OMTech 50W Fiber Laser Engraver with LightBurn and Rotary Axis.

2 സുരക്ഷാ വിവരങ്ങൾ

WARNING: This is a Class 4 Laser product. Direct exposure to the laser beam can cause severe eye and skin damage. Always wear appropriate laser safety goggles during operation. Never look directly into the laser beam or its reflections.

• Ensure the work area is well-ventilated to dissipate fumes and smoke generated during engraving.
• Keep flammable materials away from the laser engraver.
• ശ്രദ്ധിക്കാതെ യന്ത്രം പ്രവർത്തിപ്പിക്കരുത്.
• അടിയന്തര സ്റ്റോപ്പ് ബട്ടണും അതിന്റെ സ്ഥാനവും സ്വയം പരിചയപ്പെടുത്തുക.
• മെഷീൻ്റെ ശരിയായ ഗ്രൗണ്ടിംഗ് ഉറപ്പാക്കുക.

Figure 2: Safety controls including Emergency Stop, Scan Head key, and Fiber Laser button.

3. പാക്കേജ് ഉള്ളടക്കം

Upon receiving your OMTech 50W Fiber Laser Engraver, carefully unpack and verify all components against the following list:

• Main Tower (Laser Source and Control Unit)
• Laser Arm (Galvanometer Scanning Head)
• വർക്ക് ടേബിൾ
• റോട്ടറി ആക്സിസ്
• പവർ കേബിൾ
• USB കേബിൾ
• കാൽ പെഡൽ സ്വിച്ച്
• സുരക്ഷാ കണ്ണടകൾ
• Steel Ruler
• ഹെക്സ് റെഞ്ചുകൾ
• Keys for Scan Head
• USB Flash Drive (containing software and drivers)
• ഇൻസ്ട്രക്ഷൻ മാനുവൽ

4. സജ്ജീകരണം

4.1 അസംബ്ലി

1. പാക്കേജിംഗിൽ നിന്ന് എല്ലാ ഘടകങ്ങളും ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്യുക.
2. Place the main tower and work table on a stable, level surface.
3. Attach the laser arm to the support column using the provided bolts and hex wrenches. Ensure the lens is positioned above the work area.
4. Connect the cable from the laser arm to the main tower.
5. Connect the USB cable from the main tower to your computer.
6. Connect the foot pedal switch to the main tower.
7. Connect the power cord to the main tower and a standard 110V power outlet.

4.2 Initial Power-Up and Software Installation

1. Turn on the machine's emergency stop switch (red button) by rotating it clockwise.
2. Insert the key into the "Scan Head" switch and turn it to the ON position.
3. Insert the provided USB flash drive into your computer. Copy the software and drivers to your computer's hard drive.
4. Open your computer's Device Manager, locate the unrecognized machine (e.g., USB LMCV4), and install the drivers from the copied files.
5. Open the EZCad software. Set the machine parameters as indicated in the provided parameter screenshots on the USB drive.

4.3 ലേസർ ഫോക്കസ് ചെയ്യൽ

Accurate focusing is crucial for optimal engraving results. The machine features dual red dot locators for precise focusing.

1. Place your material on the work table.
2. Use the provided steel ruler to measure the distance from the surface of the material to the lower edge of the red stripe on the galvanometer scanning head. This distance should match the focal length marked on the nameplate (e.g., 175mm, 361mm).
3. Turn the adjustment wheel on the support column to raise or lower the laser arm until the measured distance is correct.
4. When correctly focused, the two red dots projected onto the material will converge into a single, sharp red dot.

Figure 3: Red dot guidance system for easy focusing and clear preview of the engraving area.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1 അടിസ്ഥാന കൊത്തുപണി പ്രക്രിയ

1. Ensure the machine is properly set up and focused.
2. Open the EZCad or LightBurn software on your computer.
3. Import your design diagram into the software.
4. Adjust the engraving parameters (power, speed, frequency) according to your material and desired effect.
5. Use the "Frame" function in the software to preview the actual size and position of your design on the material using the red dot pointers. Adjust as necessary.
6. Wear your laser safety goggles.
7. Press the "Fiber Laser" button on the main tower to activate the laser.
8. Initiate the engraving process from the software.
9. Once engraving is complete, press the "Fiber Laser" button again to stop the laser. Turn the key on the "Scan Head" switch to OFF and press the emergency stop button.

Figure 4: LightBurn software interface for design and control.

5.2 റോട്ടറി ആക്സിസ് ഉപയോഗിക്കുന്നു

The included rotary axis allows for engraving on curved or cylindrical surfaces.

1. Connect the rotary axis to the designated port on the main tower.
2. Secure your cylindrical object (e.g., ring, tumbler) onto the rotary axis chuck.
3. Adjust the laser focus for the curved surface.
4. In the software, enable and configure the rotary axis settings according to the object's dimensions.
5. Proceed with engraving as per the basic operating instructions.

Figure 5: Rotary axis for expanding engraving capabilities to curved surfaces.

6. Engraving Exampലെസ്

The OMTech 50W Fiber Laser Engraver is capable of marking and etching a wide variety of materials, including metals like steel, gold, and jewelry, as well as certain plastics.

Figure 6: Customizing a smartphone with laser engraving.

Figure 7: Detailed dog portrait engraved on metal.

ചിത്രം 8: ഉദാamples of engraved jewelry, tags, and other items.

ചിത്രം 9: അധിക ഉദാഹരണങ്ങൾamples including circuit boards, pendants, and wooden boxes.

7. പരിപാലനം

പതിവ് അറ്റകുറ്റപ്പണികൾ നിങ്ങളുടെ ലേസർ എൻഗ്രേവറിന്റെ ദീർഘായുസ്സും മികച്ച പ്രകടനവും ഉറപ്പാക്കുന്നു.

• ലെൻസ് ക്ലീനിംഗ്: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to prevent dust and debris buildup, which can affect laser performance.
• ജോലിസ്ഥലം വൃത്തിയാക്കൽ: Keep the work table and surrounding area clean from engraved material residue.
• വെൻ്റിലേഷൻ സിസ്റ്റം: Ensure the ventilation system is clear and functioning properly to remove smoke and fumes.
• കേബിൾ പരിശോധന: Regularly inspect all cables for any signs of wear or damage.

8. പ്രശ്‌നപരിഹാരം

നിങ്ങൾ നേരിട്ടേക്കാവുന്ന പൊതുവായ പ്രശ്നങ്ങളെ ഈ വിഭാഗം അഭിസംബോധന ചെയ്യുന്നു:

• ലേസർ ഔട്ട്പുട്ട് ഇല്ല: Check if the "Fiber Laser" button is pressed and illuminated. Ensure the "Scan Head" key is turned ON and the emergency stop button is disengaged. Verify all cables are securely connected.
• മോശം കൊത്തുപണി നിലവാരം: Re-check the laser focus. Ensure engraving parameters (power, speed, frequency) are appropriate for your material. Clean the laser lens if necessary.
• സോഫ്റ്റ്‌വെയർ കണക്ഷൻ പ്രശ്നങ്ങൾ: Verify the USB cable connection. Reinstall the drivers if the device is not recognized in Device Manager. Ensure the correct laser is selected in LightBurn/EZCad.
• Red Dots Not Converging: Adjust the height of the galvanometer using the adjustment wheel until the two red dots merge into one.

9 സ്പെസിഫിക്കേഷനുകൾ

Figure 10: High precision and speed capabilities of the laser engraver.

Figure 11: F-Theta scanning lens with 5-layer protective and antireflective coating.

Figure 12: The 50W solid-state laser source, designed for extreme precision.

Figure 13: Expansive 7.9" x 7.9" work area with 44.1 lb material capacity.

Figure 14: Speed comparison highlighting the efficiency of the OMTech 50W Fiber Laser.

10. വാറൻ്റിയും പിന്തുണയും

OMTech provides comprehensive support for its products:

• തിരികെ നൽകൽ നയം: Returnable until January 31, 2026.
• ഉപഭോക്തൃ പിന്തുണ: U.S.-based technical support, 24/7 online customer service, and two-year support.

For further assistance, please refer to the contact information provided with your product or visit the official OMTech webസൈറ്റ്.