OMTech CW-5200 6L ഇൻഡസ്ട്രിയൽ വാട്ടർ ചില്ലർ ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The OMTech CW-5200 Industrial Water Chiller is designed to provide efficient and stable cooling for CO2 laser engraving and cutting machines. It features a 6-liter water tank, a 0.9 HP compressor, and a cooling capacity of 5186 BTU/hour, ensuring optimal performance for laser tubes up to 150W. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting.

Figure 1: OMTech CW-5200 Industrial Water Chiller, front-side view.

Figure 2: The CW-5200 Water Chiller in operation with a laser engraver.

2. സുരക്ഷാ നിർദ്ദേശങ്ങൾ

Read all safety warnings and instructions carefully before operating the chiller. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Ensure the chiller is placed on a stable, level surface.
• Connect the chiller to a properly grounded power outlet.
• Do not operate the chiller with damaged power cords or plugs.
• Keep the chiller away from heat sources, flammable materials, and direct sunlight.
• Ensure adequate ventilation around the chiller to prevent overheating.
• Do not immerse the chiller in water or other liquids.
• Use only distilled water or recommended laser coolant. Do not add tap water directly.
• Always disconnect power before performing any maintenance or refilling the water tank.
• Keep children and unauthorized personnel away from the operating chiller.

3. ഉൽപ്പന്ന ഘടകങ്ങൾ

Familiarize yourself with the main components of your CW-5200 water chiller.

Figure 3: Front Panel Features
1. പവർ സ്വിച്ച്
2. താപനില പ്രദർശനം
3. Built-in Handles

Figure 4: Rear Panel Features
1. വാട്ടർ ഇഞ്ചക്ഷൻ പോർട്ട്
2. Power Socket (with Spare Fuse)
3. Alarm Output Terminal
4. Cooling Water Outlet
5. Cooling Water Inlet
6. Water Level Gauge
7. Radiator Fans
8 വാട്ടർ ഡ്രെയിൻ

Figure 5: High-grade brass inlet and outlet ports for secure connections.

4. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

Follow these steps for initial setup of your water chiller.

1. അൺപാക്ക് ചെയ്യുന്നു: Carefully remove the chiller from its packaging. Inspect for any damage during transit.
2. പ്ലേസ്മെൻ്റ്: Place the chiller on a flat, stable surface in a well-ventilated area. Ensure there is at least 20 cm (8 inches) of space around the unit for proper airflow.
3. വാട്ടർ ടാങ്ക് നിറയ്ക്കുക: Unscrew the water injection port cap (1 in Figure 4). Fill the tank with approximately 6 liters (1.6 gallons) of distilled water or OMTech laser coolant. Monitor the water level gauge (6 in Figure 4) to ensure the level is within the green zone. Do not overfill.


Figure 6: Use of OMTech Laser Coolant for optimal performance.


Figure 7: The 6L enclosed water tank design.
4. വാട്ടർ ഹോസുകൾ ബന്ധിപ്പിക്കുക: Connect the water inlet of your laser machine to the Cooling Water Outlet (4 in Figure 4) of the chiller. Connect the water outlet of your laser machine to the Cooling Water Inlet (5 in Figure 4) of the chiller. Secure all connections to prevent leaks.
5. പവർ കണക്ഷൻ: Connect the power cord to the Power Socket (2 in Figure 4) on the chiller and then plug it into a grounded electrical outlet.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Operating the CW-5200 chiller is straightforward once properly set up.

1. പവർ ഓൺ: Flip the Power Switch (1 in Figure 3) to the 'ON' position. The chiller will start, and the temperature display will illuminate.
2. Initial Circulation: Allow the chiller to run for a few minutes to circulate the water and remove any air bubbles from the system. Check the water level gauge again and add more water if necessary.
3. താപനില നിരീക്ഷണം: The digital display (2 in Figure 3) shows the current water temperature. The chiller is designed to maintain the water temperature within 0.3°C of the set point.

Figure 8: Real-time temperature display for precise monitoring.


Figure 9: Digital display and indicators provide real-time feedback.

4. ലേസർ പ്രവർത്തനം: Once the chiller has reached a stable operating temperature, you can begin operating your CO2 laser machine. The chiller will automatically regulate the water temperature to prevent overheating of the laser tube.
5. പവർ ഓഫ്: After use, turn off your laser machine first, then switch off the chiller using the Power Switch.

6. പരിപാലനം

Regular maintenance ensures the longevity and optimal performance of your chiller.

• വെള്ളം മാറ്റിസ്ഥാപിക്കൽ: Replace the cooling water every 1 to 3 months, depending on usage and environmental conditions. Always use distilled water or OMTech laser coolant.
• Clean Radiator Fins: Periodically clean the radiator fins (7 in Figure 4) to ensure efficient heat dissipation. Use a soft brush or compressed air to remove dust and debris.
• ജലനിരപ്പ് പരിശോധിക്കുക: Regularly check the water level gauge and refill if the level drops below the green zone.
• ഡ്രെയിനേജ്: Use the water drain port (8 in Figure 4) to empty the tank when replacing water or storing the unit.


Figure 10: Quick drainage system for easy water removal.

• ഹോസുകൾ പരിശോധിക്കുക: Periodically inspect all water hoses for kinks, cracks, or leaks. Replace any damaged hoses immediately.

7. പ്രശ്‌നപരിഹാരം

This section addresses common issues you might encounter with your CW-5200 chiller.

• Chiller Not Turning On:
  • Check if the power cord is securely plugged into both the chiller and the wall outlet.
  • Verify that the power switch is in the 'ON' position.
  • Check the fuse in the power socket (2 in Figure 4). Replace if blown.
• വെള്ളം ഒഴുകുന്നില്ല:
  • ജലനിരപ്പ് ആവശ്യത്തിന് ഉണ്ടെന്ന് ഉറപ്പാക്കുക.
  • Check for kinks or blockages in the water hoses.
  • Verify that the pump is operating (listen for pump noise).
• High Water Temperature Alarm:
  • Ensure the chiller's radiator fins are clean and not obstructed.
  • Verify that the ambient room temperature is not excessively high.
  • Check if the cooling fans are operating.
  • Ensure the water level is sufficient.
• വെള്ളം ചോർച്ച:
  • Inspect all hose connections for tightness.
  • Check hoses for any damage or cracks.

If issues persist, contact OMTech customer support for assistance.

8 സ്പെസിഫിക്കേഷനുകൾ

Detailed technical specifications for the OMTech CW-5200 Water Chiller.

Figure 11: Key specifications of the CW-5200 Chiller.

9. വാറൻ്റിയും പിന്തുണയും

OMTech provides comprehensive support for its products.

• വാറൻ്റി: This product comes with a 1-year warranty. Please refer to your purchase documentation for specific terms and conditions.
• ഉപഭോക്തൃ പിന്തുണ: Our 24/7 global support team is available to provide expert assistance, including technical guidance.
• ബന്ധപ്പെടുക: പിന്തുണയ്ക്ക്, ദയവായി ഔദ്യോഗിക OMTech സന്ദർശിക്കുക. webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ വാങ്ങലിനൊപ്പം നൽകിയിരിക്കുന്ന കോൺടാക്റ്റ് വിവരങ്ങൾ റഫർ ചെയ്യുക.