1. ആമുഖം
Thank you for choosing the ProMaster Ultrasoft US1014RGB 2-Light Transport Kit. This kit provides two versatile LED light panels designed for photographers and videographers seeking soft, high-quality illumination. The lights feature RGBWW capabilities, variable color temperature, and special effects, all controllable via an intuitive mobile application. This manual provides essential information for the safe and effective operation of your new lighting kit.
Image 1.1: The ProMaster Ultrasoft US1014RGB 2-Light Transport Kit, showing both LED panels on their respective stands.
2 സുരക്ഷാ വിവരങ്ങൾ
- Do not expose the lights to water or excessive humidity.
- LED പ്രകാശ സ്രോതസ്സിലേക്ക് നേരിട്ട് കണ്ണുകൾ പതിക്കുന്നത് ഒഴിവാക്കുക.
- അമിതമായി ചൂടാക്കുന്നത് തടയാൻ ശരിയായ വായുസഞ്ചാരം ഉറപ്പാക്കുക.
- Use only the specified power adapters or compatible NP-F batteries and D-Tap power sources.
- കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
- Always secure the light panels firmly to the stands to prevent accidental falls.
- വൃത്തിയാക്കുന്നതിനോ അറ്റകുറ്റപ്പണികൾ നടത്തുന്നതിനോ മുമ്പ് വൈദ്യുതി വിച്ഛേദിക്കുക.
3. പാക്കേജ് ഉള്ളടക്കം
Verify that all items are present in your kit:
- 2 x ProMaster Ultrasoft US1014RGB LED Light Panels
- 2 x LS-CT Light Stands
- 2 x എസി പവർ അഡാപ്റ്ററുകൾ
- 1 x Transport Case
4. ഉൽപ്പന്നം കഴിഞ്ഞുview
4.1 LED ലൈറ്റ് പാനൽ
ചിത്രം 4.1: മുൻഭാഗം view of the LED light panel with barn doors.
The Ultrasoft LED panel features an integrated diffuser for soft light output. The attached barn doors allow for light shaping and spill control.
4.2 നിയന്ത്രണ പാനൽ
Image 4.2: Rear control panel of the LED light.
The rear panel includes a display, mode selection buttons (MODE, TEMP, BRT, SAT, HUE, EFX), a control dial, a power switch, and dual NP-F battery mounts. A DC-IN port is also present for AC power or D-Tap input.
4.3 Light Stand
Image 4.3: ProMaster LS-CT Light Stand.
The included LS-CT light stands are compact and provide stable support for the LED panels.
5. സജ്ജീകരണം
5.1 Assembling the Light Stand
- Remove the LS-CT light stand from the transport case.
- Extend the legs of the stand until they are fully spread and stable.
- Loosen the locking collars on the stand sections and extend the center column to the desired height. Securely tighten all locking collars.
5.2 Mounting the Light Panel
- Locate the mounting receiver on the bottom of the LED light panel.
- Place the light panel onto the stud at the top of the light stand.
- Tighten the locking knob on the light panel's yoke to secure it to the stand. Adjust the tilt angle as needed and tighten the tilt locking knob.
5.3 Powering the Lights
The US1014RGB light panel offers three power options:
- എസി പവർ: Connect the included AC power adapter to the DC-IN port on the light panel and plug it into a wall outlet.
- NP-F ബാറ്ററികൾ: Insert two compatible NP-F type batteries (sold separately) into the battery mounts on the rear of the panel. Ensure correct polarity.
- D-Tap: Use a D-Tap cable (sold separately) to connect to a compatible D-Tap power source via the DC-IN port.
6. പ്രവർത്തിക്കുന്നു
6.1 പവർ ഓൺ/ഓഫ്
Flip the power switch located on the rear control panel to the 'ON' position to power on the light. Flip it to 'OFF' to power off.
6.2 മാനുവൽ നിയന്ത്രണം
Use the buttons and control dial on the rear panel to adjust settings:
- വഴികൾ: Press to cycle through different operating modes (CCT, RGB, EFX).
- CCT മോഡ്: Use the 'TEMP' button and control dial to adjust color temperature from 2,500K to 8,500K. Use the 'BRT' button and control dial to adjust brightness.
- RGB മോഡ്: Use the 'HUE', 'SAT', and 'BRT' buttons with the control dial to adjust hue (360 colors), saturation, and brightness.
- EFX Mode: Use the 'EFX' button and control dial to select from 19 special effects scenes. Use the 'BRT' button to adjust brightness of the effect.
6.3 Wireless Control with Light Attendant App
Image 6.1: ProMaster Light Attendant App Interface.
The ProMaster Ultrasoft US1014RGB can be controlled wirelessly using the free Light Attendant app, available for iOS and Android devices.
- Download and install the 'Light Attendant' app from your device's app store.
- Ensure your light panel is powered on.
- Open the app and follow the on-screen instructions to connect to your light panel(s). The app allows for comprehensive control over all light settings, including CCT, RGB, and special effects.
7. പരിപാലനം
7.1 വൃത്തിയാക്കൽ
To clean the light panel and stand, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by a dry cloth. Do not use harsh chemicals or abrasive cleaners.
7.2 സംഭരണം
When not in use, store the light kit in its transport case in a cool, dry place, away from direct sunlight and extreme temperatures.
8. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ലൈറ്റ് ഓണാക്കില്ല. | No power, low battery, or power switch off. | Check power connection, replace/charge batteries, ensure power switch is ON. |
| Cannot connect to Light Attendant app. | Bluetooth off, app not paired, or light too far. | Ensure Bluetooth is enabled on device, restart app/light, move closer to light, re-pair in app. |
| പ്രകാശ ഔട്ട്പുട്ട് പൊരുത്തപ്പെടുന്നില്ല. | കുറഞ്ഞ ബാറ്ററി പവർ. | Replace or recharge batteries, or use AC power. |
9 സ്പെസിഫിക്കേഷനുകൾ
- മോഡൽ: US1014RGB
- പ്രകാശ സ്രോതസ്സ് തരം: എൽഇഡി
- വർണ്ണ താപനില: 2,500K - 8,500K
- വർണ്ണ ചിത്രീകരണം: TLCI 98+ / CRI 96+
- RGB മോഡ്: 360 colors with saturation control
- പ്രത്യേക ഇഫക്റ്റുകൾ: 19 സീനുകൾ
- പവർ ഓപ്ഷനുകൾ: AC, NP-F batteries, D-Tap
- വയർലെസ് നിയന്ത്രണം: Light Attendant app (iOS/Android)
- മെറ്റീരിയൽ: Plastic, Polypropylene
- Item Weight (per light): Approximately 10 pounds (including stand)
- പാക്കേജ് അളവുകൾ: 24.09 x 16.93 x 13.27 ഇഞ്ച്
10. വാറൻ്റിയും പിന്തുണയും
ProMaster products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official ProMaster website or contact your authorized ProMaster dealer. Keep your proof of purchase for warranty claims.
കൂടുതൽ സഹായത്തിന്, സന്ദർശിക്കുക: www.promaster.com
