1. ആമുഖവും അവസാനവുംview
The DECKED Truck Bed Storage System is an American-made, in-vehicle storage solution designed to maximize the utility of your truck bed. It provides weatherproof, secure, and ergonomic storage for tools, gear, and valuables, while maintaining the full cargo-carrying capabilities of your truck bed. The system features full bed-length drawers for organized storage below, and a heavy-duty flat deck above capable of supporting up to 2,000 lbs of cargo. It is an ideal solution for tradesmen, outdoor enthusiasts, and anyone requiring rugged and organized storage.

Figure 1.1: The DECKED Truck Bed Storage System with drawers fully extended, showcasinജി ദി ample സംഭരണ സ്ഥലം.

ചിത്രം 1.2: ഒരു ഓവർഹെഡ് view of the DECKED system installed in a truck bed, highlighting the flat deck surface.
2. ഉൽപ്പന്ന സവിശേഷതകൾ
- അനുയോജ്യത: Specifically designed for Toyota Tundra models from 2007-2021 with a 5'7" truck bed length.
- Massive Storage & Payload: Offers significant storage volume in two full bed-length drawers. The heavy-duty flat deck supports up to 2,000 lbs of cargo. Each drawer has a 200 lb payload capacity.
- Weatherproof & Secure: Features updated drawer seals to protect contents from car washes, dust, and particulates. While not airtight, closeout panels minimize airborne particles. Drawers are secured via the locking tailgate or an optional keyed lock accessory (not included).
- നീണ്ടുനിൽക്കുന്ന നിർമ്മാണം: Manufactured in the USA from recycled High-Density Polyethylene (HDPE) co-molded to a galvanized steel sub-frame. Built to withstand extreme weather and intense UV light exposure.
- Easy Installation & Removal: Initial installation typically takes 2-3 hours using common hand tools. Subsequent removal or re-installation can be completed in approximately 15 minutes.
- ആക്സസറി അനുയോജ്യത: Compatible with DECKED D-Co modular organization accessories (not included) for enhanced organization.

Figure 2.1: Visual representation of the system's 2000 lb payload capacity and included stash bins.

Figure 2.2: A demonstration of the system's weatherproof capabilities, showing water being poured over it.
3. ഉൾപ്പെടുത്തിയ ആക്സസറികൾ
Your DECKED Truck Bed Storage System comes with the following accessories to help you organize your gear:
- ONE Desert Tan D-co Case Sixer 16
- ONE Desert Tan D-co Case Halfrack 32
- ONE Drawerganizer Drawer Bin
- TWO Drawer Dividers
- TWO Shallow Stash Bins
- TWO Deep Stash Bins
- FOUR D-Ring Tie-downs

Figure 3.1: A visual display of the various accessories included with your DECKED system.
4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Initial installation of the DECKED system typically takes 2 to 3 hours using common hand tools. The system is compatible with spray-in liners and most bed rugs, but it is അല്ല ഡ്രോപ്പ്-ഇൻ പ്ലാസ്റ്റിക് ബെഡ് ലൈനറുകളുമായി പൊരുത്തപ്പെടുന്നു.
ആവശ്യമായ ഉപകരണങ്ങൾ:
- 1/2 inch open-ended wrench
- ഫിലിപ്സ് സ്ക്രൂഡ്രൈവർ
- 7/32 inch hex wrench
- 3/8 ഇഞ്ച് സോക്കറ്റ്
- 17/16 ഇഞ്ച് സോക്കറ്റ്
ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ:
- ട്രക്ക് ബെഡ് തയ്യാറാക്കുക: Ensure your truck bed is clean and clear of any debris.
- സിസ്റ്റം കൂട്ടിച്ചേർക്കുക: Follow the detailed instructions provided in the packaging for assembling the DECKED system components.
- Position the System: Carefully place the assembled system into your truck bed.
- സിസ്റ്റം സുരക്ഷിതമാക്കുക: Use the provided J-hooks to secure the system to your truck bed. Ensure the system is centered and aligned with the ribs or troughs on your bed floor for proper fitment. Snug the J-hooks down, but do not overtighten.
- ഡ്രോയറുകൾ ഇൻസ്റ്റാൾ ചെയ്യുക: Slide the drawers into their respective compartments.
- ആക്സസറികൾ അറ്റാച്ചുചെയ്യുക: Place the included accessories (D-co cases, Drawerganizer, dividers, stash bins) into the drawers as desired.

Figure 4.1: All system components laid out, ready for assembly and installation.
Video Guide: How to Remove & Re-Install your DECKED System
Video 4.1: This official DECKED video provides a visual guide on how to remove and re-install your DECKED system from your truck bed, including tool usage and key steps like removing the ruler, J-hooks, and drawers.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The DECKED system is designed for ease of use and accessibility.
ഡ്രോയർ പ്രവർത്തനം:
- To open a drawer, simply pull the handle outwards. The drawers are equipped with a smooth slide mechanism for easy access.
- To close a drawer, push it firmly back into the system until it latches securely.
ഡെക്ക് ഉപയോഗം:
- The flat deck surface can be used to haul large items, supporting up to 2,000 lbs.
- Utilize the integrated D-Ring tie-downs to secure cargo on top of the deck.
6. പരിപാലനം
The DECKED system is built for durability and low maintenance. Regular cleaning and inspection will ensure its longevity.
- വൃത്തിയാക്കൽ: Clean the system with mild soap and water as needed. Avoid harsh chemicals that may damage the HDPE material.
- Drawer Seals: Periodically inspect the drawer seals for any signs of wear or damage. While designed to protect against elements, maintaining the seals ensures optimal performance.
- ചലിക്കുന്ന ഭാഗങ്ങൾ: The slide mechanism and wheels are designed for smooth operation. Keep them free of excessive dirt or debris.
7. പ്രശ്നപരിഹാരം
ചില പൊതുവായ പ്രശ്നങ്ങളും അവയുടെ പരിഹാരങ്ങളും ഇതാ:
- ഡ്രോയറുകൾ സുഗമമായി സ്ലൈഡുചെയ്യുന്നില്ല: Check for any obstructions in the drawer tracks or debris on the wheels. Clean the tracks and wheels if necessary.
- Water or dust ingress: Ensure the tailgate is properly closed and locked. Inspect the drawer seals for any damage or misalignment. While drawers are not airtight, closeout panels should minimize particulates.
- System appears misaligned after re-installation: Truck beds can frequently be out of square. When centering your system, use the ribs or troughs on your truck bed floor as the true reference for alignment, rather than the truck bed sides.
8 സ്പെസിഫിക്കേഷനുകൾ
| ആട്രിബ്യൂട്ട് | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | അലങ്കരിച്ച |
| മോഡൽ | Drawer System compatible with Toyota Tundra (2007-2021) 5'7" |
| ഇനം മോഡൽ നമ്പർ | XT1 |
| യു.പി.സി | 850025181358 |
| നിറം | മരുഭൂമി ടാൻ |
| മെറ്റീരിയൽ | Recycled High-Density Polyethylene (HDPE) and Steel |
| പ്രത്യേക ഫീച്ചർ | കാലാവസ്ഥയെ പ്രതിരോധിക്കുന്ന |
| ഉൽപ്പന്ന അളവുകൾ (L x W x H) | 64" x 72" x 12" |
| അടയ്ക്കൽ തരം | Latch or Clip On |
| ജല പ്രതിരോധ നില | വാട്ടർ റിപ്പല്ലൻ്റ് |
| ഓപ്പണിംഗ് മെക്കാനിസം | സ്ലൈഡ് |
| കമ്പാർട്ടുമെന്റുകളുടെ എണ്ണം | 2 |
| Maximum Deck Weight Recommendation | 2,000 പൗണ്ട് |
| Maximum Drawer Weight Recommendation | 200 Pounds per drawer |
9. വാറൻ്റിയും പിന്തുണയും
The DECKED Truck Bed Storage System is built with quality and durability in mind. It is ജീവൻ ഉറപ്പ്, reflecting the manufacturer's commitment to excellence and customer satisfaction.
For any questions, technical assistance, or warranty claims, please contact DECKED customer support directly. Refer to the contact information provided with your product packaging or visit the official DECKED webഏറ്റവും കാലികമായ പിന്തുണാ വിശദാംശങ്ങൾക്കായി സൈറ്റ്.





