First Alert SMICO100-AC Interconnect Hardwire Combination Smoke & Carbon Monoxide Alarm

ആമുഖം

The First Alert SMICO100-AC is an Interconnect Hardwire 2-in-1 Smoke & Carbon Monoxide Alarm with Battery Backup. It incorporates Precision Detection technology, designed to reduce nuisance alarms from cooking while providing early warning for fire and carbon monoxide hazards. This alarm is designed for easy installation and interconnection with compatible alarms, creating a comprehensive safety system throughout your home.

Image: First Alert - Most Trusted Brand in Fire Safety.

സുരക്ഷാ വിവരങ്ങൾ

മുന്നറിയിപ്പ്! Carbon monoxide cannot be seen or smelled but can kill you. If the alarm sounds, follow these steps:

1. ടെസ്റ്റ്/സൈലൻസ് ബട്ടൺ പ്രവർത്തിപ്പിക്കുക.
2. നിങ്ങളുടെ അടിയന്തര സേവനങ്ങളെ വിളിക്കുക (അഗ്നിശമനസേന അല്ലെങ്കിൽ 911).
3. Immediately move to fresh air - outdoors or by an open door/window.

പ്രധാനം! This smoke alarm contains a maximum of 1.0 microcuries (37kBq) of Americium 241, a radioactive material. Distributed under U.S. NRC License No. 13-23889-01E and is made in compliance with U.S. NRC safety criteria in 10CFR32.27. The purchaser is exempt from any regulatory requirements.

ശുപാർശ ചെയ്യുന്ന പ്ലെയ്‌സ്‌മെന്റ്

Install alarms on every level of your home and in every bedroom to ensure optimal protection. Proper placement is crucial for early detection of smoke and carbon monoxide.

Image: Recommended placement diagram for smoke and CO alarms.

Image: Install alarms on every level and in every bedroom.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

The SMICO100-AC alarm is designed for hardwired installation and includes a 9V battery backup. It features a Quick Connect Plug for simplified wiring.

ഇൻസ്റ്റാളേഷന് മുമ്പ്:

• Ensure power is OFF at the circuit breaker for the circuit you will be working on.
• Familiarize yourself with local electrical codes and installation requirements.

ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ:

1. പഴയ അലാറം നീക്കം ചെയ്യുക: Disconnect the old alarm from its wiring harness and mounting bracket.
2. Wire New Harness: If your existing wiring harness is not compatible, use the new Quick Connect Plug provided. Connect the black wire to the hot wire, white to neutral, and orange to the interconnect wire (if applicable). Ensure all connections are secure with wire nuts.
3. മൌണ്ടിംഗ് ബ്രാക്കറ്റ്: Attach the new mounting bracket to the electrical box on the ceiling or wall. The bracket is designed to accommodate various screw arrangements.
4. Connect Alarm: Plug the wiring harness into the back of the SMICO100-AC alarm.
5. ബാറ്ററി ഇൻസ്റ്റാൾ ചെയ്യുക: The alarm comes with a pre-installed 9V Duracell battery. Remove the plastic tab to activate it.
6. Secure Alarm: Align the alarm with the mounting bracket and twist clockwise until it locks securely into place.
7. പവർ പുന ore സ്ഥാപിക്കുക: സർക്യൂട്ട് ബ്രേക്കറിൽ പവർ ഓണാക്കുക.
8. ടെസ്റ്റ് അലാറം: Press and hold the Test/Silence button until the alarm sounds. Refer to the 'Operating Instructions' section for expected alarm patterns.

ചിത്രം: പിന്നിലേക്ക് view of the alarm with wiring harness.

Image: Quick Connect Plug for easy installation.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The SMICO100-AC alarm provides distinct audible signals for smoke and carbon monoxide detection, as well as for low battery, malfunction, and end-of-life conditions.

ടെസ്റ്റ്/സൈലൻസ് ബട്ടൺ:

Press and hold the Test/Silence button to test the alarm's functionality. The alarm will sound if working correctly. This button can also be used to temporarily silence nuisance alarms.

Image: Hand pressing the Test/Silence button.

Alarm Guide:

• 3 ബീപ്പുകൾ: സ്മോക്ക് അലാറം
• 4 ബീപ്പുകൾ: കാർബൺ മോണോക്സൈഡ് (CO) അലാറം
• 1 "Chirp" every Minute: Low Battery - Replace Battery
• 3 "Chirps" every Minute: Malfunction - Replace Alarm
• 5 "Chirps" every Minute: End of Life - Replace Alarm

മെയിൻ്റനൻസ്

Regular maintenance ensures the continued reliability of your alarm. Gently vacuum or use clean compressed air to remove accumulated dust monthly. Never use water, cleaners, or solvents, as these may damage the unit. Press the test button after installation, weekly, and after cleaning to check all alarm functions.

മാറ്റിസ്ഥാപിക്കൽ ഷെഡ്യൂൾ:

Replace the alarm at least every 10 years after installation to ensure optimal performance and safety.

Image: Test alarms regularly.

Image: Replace alarms at least every 10 years.

ട്രബിൾഷൂട്ടിംഗ്

If your alarm is chirping or sounding unexpectedly, refer to the Alarm Guide in the 'Operating Instructions' section to identify the specific issue. Common issues and their resolutions include:

• Nuisance Alarms (Cooking Smoke): The SMICO100-AC features Precision Detection technology to minimize nuisance alarms. If an alarm sounds due to cooking, use the Test/Silence button to temporarily silence it. Ensure proper ventilation in cooking areas.
• കുറഞ്ഞ ബാറ്ററി: A single chirp every minute indicates a low battery. Replace the 9V battery immediately.
• ശരിയായി പ്രവർത്തിക്കാതിരിക്കൽ: Three chirps every minute indicate a malfunction. The alarm unit needs to be replaced.
• ജീവിതാവസാനം: Five chirps every minute indicate the alarm has reached its end of life and needs to be replaced.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For detailed warranty information and user manuals, please refer to the official First Alert webസൈറ്റ് അല്ലെങ്കിൽ ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.

• കസ്റ്റമർ സർവീസ് ടീം: 1-800-323-9005
• Webസൈറ്റ്: firstalert.com