Wasserstein Solar Panel with Internal Battery for Blink Outdoor 3/4 Cameras

ആമുഖം

This manual provides instructions for the installation, operation, and maintenance of your Wasserstein Solar Panel with Internal Battery. This solar panel is designed to provide continuous power to your Blink Outdoor (3rd Gen) and Blink Outdoor 4 (4th Gen) cameras, ensuring uninterrupted operation without frequent battery changes.

Image: The Wasserstein Solar Panel shown alongside two Blink Outdoor cameras, illustrating its compatibility and purpose.

പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• 1 x Solar Panel with internal battery
• 1 x 13.1ft/4m weatherproof micro USB cable
• 1 x USB C converter (for Blink Outdoor 4th Gen)
• 1 x 360-degree Mounting bracket
• 3 x Screws and Wall Anchors
• 1 x ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps to install your solar panel and connect it to your Blink camera:

1. ഒരു ലൊക്കേഷൻ തിരഞ്ഞെടുക്കുക: Select an outdoor location that receives several hours of direct sunlight daily. Optimal sunlight exposure is crucial for efficient charging.


Image: A solar panel mounted on an exterior wall, illustrating the importance of choosing a sunny spot for installation.

2. ബ്രാക്കറ്റ് മൌണ്ട് ചെയ്യുക: Use the provided screws and wall anchors to securely attach the 360-degree mounting bracket to your chosen surface. The bracket allows for flexible positioning to maximize sun exposure.


ചിത്രം: ഒരു വശം view of the solar panel, highlighting its adjustable mounting mechanism for optimal angle setting.

3. സോളാർ പാനൽ ഘടിപ്പിക്കുക: Secure the solar panel to the mounted bracket. Adjust its angle to face the sun directly for the longest possible duration each day.
4. ക്യാമറയിലേക്ക് കണക്റ്റുചെയ്യുക:
   • വേണ്ടി Blink Outdoor (3rd Gen): Connect the micro USB cable directly from the solar panel to your camera's power port.
   • വേണ്ടി Blink Outdoor 4 (4th Gen): Use the included USB C converter to connect the micro USB cable from the solar panel to your camera's power port.


Image: A close-up showing the solar panel connected to a Blink camera, with an inset highlighting the USB C converter for newer Blink models.

5. പ്രാരംഭ ചാർജ്: It is recommended to allow the solar panel to charge for at least two full days in direct sunlight before relying solely on its power. This ensures the internal battery is adequately charged.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once installed and connected, the solar panel will automatically begin charging your Blink camera's internal battery when exposed to sunlight. The internal battery stores energy, providing power to your camera even during periods of low light or at night.

• The solar panel is designed to keep your camera powered 24/7 under normal operating conditions with sufficient sunlight.
• The 13.1ft/4m cable provides flexibility in positioning the solar panel for optimal sun exposure, even if the camera is in a shaded area.
• The system operates without requiring manual intervention after initial setup.

Image: A Blink camera mounted on a house wall, continuously powered by the Wasserstein solar panel, illustrating 24/7 operation.

മെയിൻ്റനൻസ്

The Wasserstein Solar Panel is built for outdoor use and requires minimal maintenance:

• വൃത്തിയാക്കൽ: സോളാർ പാനലിൻ്റെ ഉപരിതലം ഇടയ്ക്കിടെ മൃദുവായ, ഡി ഉപയോഗിച്ച് തുടയ്ക്കുകamp ചാർജിംഗ് കാര്യക്ഷമത കുറയ്ക്കുന്ന പൊടി, അഴുക്ക് അല്ലെങ്കിൽ അവശിഷ്ടങ്ങൾ നീക്കം ചെയ്യാൻ തുണി ഉപയോഗിക്കുക. അബ്രാസീവ് ക്ലീനറുകൾ ഒഴിവാക്കുക.
• കാലാവസ്ഥ പ്രതിരോധം: The panel is weatherproof and designed to withstand various outdoor conditions. Ensure the cable connection to the camera is secure and the rubber grommet is properly seated to maintain water resistance.


Image: A solar panel shown in rainy conditions, emphasizing its weatherproof construction.

• കേബിൾ പരിശോധന: Occasionally check the cable for any signs of wear or damage.

ട്രബിൾഷൂട്ടിംഗ്

If your Blink camera is not receiving power from the solar panel, consider the following:

• സൂര്യപ്രകാശം അപര്യാപ്തം: Ensure the solar panel receives at least 4-6 hours of direct sunlight daily. Obstructions like trees, buildings, or shade can significantly reduce charging efficiency.
• കേബിൾ കണക്ഷൻ: Verify that the micro USB cable is securely connected to both the solar panel and the Blink camera. If using a USB C converter, ensure it is properly attached.
• പ്രാരംഭ ചാർജ്: If newly installed, the internal battery may require a full day or two of direct sunlight to build up an initial charge.
• Camera Battery Status: Check the battery status within the Blink app. The solar panel maintains the camera's battery at an "OK" status, which is equivalent to new batteries. There are no external indicators on the solar panel itself.
• അതികഠിനമായ കാലാവസ്ഥ: In prolonged periods of heavy cloud cover or extreme cold, charging efficiency may be reduced. The internal battery helps mitigate this, but continuous poor weather can eventually deplete the charge.

സ്പെസിഫിക്കേഷനുകൾ

Image: Visual representation of the solar panel's compatibility with various Blink camera models, including Blink Outdoor 4 and 3.

വാറൻ്റിയും പിന്തുണയും

Wasserstein provides a 3-month warranty for this product. If you encounter any issues or have questions, please contact Wasserstein customer support for assistance.

For further support, visit the official Wasserstein webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ വാങ്ങൽ ഡോക്യുമെന്റേഷൻ പരിശോധിക്കുക.