1. ആമുഖം
The Sperax Walking Pad is a versatile 2-in-1 under desk treadmill designed for both walking and light running. Its compact and quiet operation makes it ideal for home and office environments, allowing users to integrate physical activity into their daily routines without disruption. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting.

Image: The Sperax Walking Pad, demonstrating its use for both running and walking.
2 സുരക്ഷാ വിവരങ്ങൾ
Please read all safety instructions carefully before using the Sperax Walking Pad. Failure to follow these instructions may result in injury or damage to the product.
- പ്ലേസ്മെൻ്റ്: Place the treadmill on a flat, stable surface. Ensure adequate clear space around the unit (at least 2 feet on all sides).
- ഊർജ്ജ സ്രോതസ്സ്: Use only a grounded electrical outlet with the correct voltage. Do not use extension cords.
- ഉപയോക്തൃ ഭാര പരിധി: പരമാവധി ഭാര ശേഷി 320 പൗണ്ട് (ഏകദേശം 145 കിലോഗ്രാം) കവിയരുത്.
- കുട്ടികളും വളർത്തുമൃഗങ്ങളും: ഓപ്പറേഷൻ സമയത്ത് ട്രെഡ്മില്ലിൽ നിന്ന് കുട്ടികളെയും വളർത്തുമൃഗങ്ങളെയും അകറ്റി നിർത്തുക.
- പാദരക്ഷ: ട്രെഡ്മിൽ ഉപയോഗിക്കുമ്പോൾ എല്ലായ്പ്പോഴും ഉചിതമായ അത്ലറ്റിക് പാദരക്ഷകൾ ധരിക്കുക.
- അടിയന്തരമായി നിർത്തുക: Familiarize yourself with the emergency stop function.
- പരിപാലനം: Unplug the treadmill before cleaning or performing any maintenance.
- സംഭരണം: Store the treadmill in a dry, safe place away from moisture and extreme temperatures.
3. പാക്കേജ് ഉള്ളടക്കം
പാക്കേജിൽ എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:
- Sperax Walking Pad x 1
- വിദൂര നിയന്ത്രണം x 1
- എൽ-ആകൃതിയിലുള്ള റെഞ്ച് x 1
- പവർ കോർഡ് x 1
- ഉപയോക്തൃ മാനുവൽ x 1
- Lubrication Oil (small bottle) x 1

Image: Supporting tools and components included with the Sperax Walking Pad.
4. സജ്ജീകരണം
The Sperax Walking Pad requires minimal assembly and is designed for quick setup.
- അൺപാക്ക് ചെയ്യുന്നു: വാക്കിംഗ് പാഡും എല്ലാ അനുബന്ധ ഉപകരണങ്ങളും പാക്കേജിംഗിൽ നിന്ന് ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്യുക.
- പ്ലേസ്മെൻ്റ്: Place the treadmill on a firm, level surface. Ensure there is sufficient space around the unit for safe operation and movement.
- പവർ കണക്ഷൻ: Connect the power cord to the treadmill's power input port, then plug the other end into a grounded electrical outlet.
- പ്രാരംഭ പരിശോധന: Before first use, ensure the running belt is centered and free of any obstructions.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The Sperax Walking Pad is controlled via the included remote control and features an integrated LED display.
5.1 വിദൂര നിയന്ത്രണ പ്രവർത്തനങ്ങൾ
The remote control allows you to power on/off the treadmill, adjust speed, and select modes.

Image: Remote control and its functions for the Sperax Walking Pad.
- പവർ ഓൺ/ഓഫ്: Press the power button to turn the treadmill on or off.
- വേഗത ക്രമീകരണം: Use the '+' button to increase speed and '-' button to decrease speed. The treadmill supports speeds from 0.6 MPH to 3.8 MPH.
- മോഡ് തിരഞ്ഞെടുക്കൽ: The remote may include a button for pattern selection, allowing you to switch between different exercise modes if available.
5.2 എൽഇഡി ഡിസ്പ്ലേ
The integrated LED screen displays real-time exercise data.

Image: Multi-function LED display tracking training data.
- വേഗത: നിലവിലെ നടത്ത/ഓട്ട വേഗത.
- സമയം: നിങ്ങളുടെ വ്യായാമത്തിന്റെ ദൈർഘ്യം.
- ദൂരം: ആകെ സഞ്ചരിച്ച ദൂരം.
- കലോറികൾ: കണക്കാക്കിയ കലോറികൾ കത്തിച്ചു.
5.3 വ്യായാമ രീതികൾ
The Sperax Walking Pad supports various modes to suit your activity level:

Image: Visual representation of Running, Walking, and Working modes.
- പ്രവർത്തിക്കുന്ന മോഡ്: 2.5 - 3.8 MPH (for brisk walking or light jogging).
- നടത്ത മോഡ്: 0.6 - 2.5 MPH (for general walking).
- പ്രവർത്തന രീതി: 0.6 - 1.5 MPH (ideal for use under a standing desk).
6. പരിപാലനം
Regular maintenance ensures the longevity and optimal performance of your Sperax Walking Pad.
6.1 ലൂബ്രിക്കേഷൻ
The running belt requires periodic lubrication to reduce friction and wear. Use the provided lubrication oil.

Image: Instructions for adding roller skid agent (lubrication) to the running belt.
- ആവൃത്തി: Lubricate the belt every 3-6 months, or after approximately 100 hours of use, depending on usage.
- നടപടിക്രമം:
- Unplug the treadmill from the power outlet.
- Gently lift one side of the running belt.
- Apply a small amount of silicone lubricant (provided) in a Z-pattern on the deck under the belt.
- മറുവശത്ത് ആവർത്തിക്കുക.
- Plug in the treadmill and run it at a low speed (e.g., 1 MPH) for 5 minutes to distribute the lubricant evenly.
6.2 ബെൽറ്റ് ക്രമീകരണം
If the running belt shifts to one side or slips, it may need adjustment.

Image: Adjusting the running belt using the provided L-shaped wrench.
- ബെൽറ്റ് കേന്ദ്രീകരിക്കൽ:
- Start the treadmill at a low speed (e.g., 1 MPH).
- If the belt is too far to the right, turn the right adjustment bolt (at the rear of the treadmill) clockwise a quarter turn using the L-shaped wrench.
- If the belt is too far to the left, turn the left adjustment bolt clockwise a quarter turn.
- Allow the treadmill to run for a few minutes and observe the belt's position. Repeat adjustments as needed until the belt is centered.
- Tightening the Belt (if slipping):
- If the belt slips during use, turn both left and right adjustment bolts clockwise a quarter turn simultaneously.
- Test the belt by walking on it. Repeat adjustments until slipping stops. Do not overtighten.
6.3 വൃത്തിയാക്കൽ
Wipe down the treadmill regularly with a damp തുണി. ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
7. പ്രശ്നപരിഹാരം
പൊതുവായ പ്രശ്നങ്ങളും അവയുടെ പരിഹാരങ്ങളും അറിയാൻ ഈ വിഭാഗം കാണുക.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ട്രെഡ്മിൽ പവർ ഓൺ ആകുന്നില്ല. | Power cord not connected; power outlet issue; remote control battery low. | Ensure power cord is securely plugged in. Test the outlet with another device. Replace remote control batteries. |
| റണ്ണിംഗ് ബെൽറ്റ് സ്ലിപ്പുകൾ. | ബെൽറ്റ് വളരെ അയഞ്ഞിരിക്കുന്നു; ലൂബ്രിക്കേഷൻ ആവശ്യത്തിന് ഇല്ല. | Adjust belt tension (see Section 6.2). Apply lubrication oil (see Section 6.1). |
| Running belt shifts to one side. | Belt out of alignment. | Adjust belt alignment (see Section 6.2). |
| പ്രവർത്തന സമയത്ത് അസാധാരണമായ ശബ്ദം. | Lack of lubrication; loose components; foreign object. | Lubricate the belt. Check for and tighten any loose screws. Inspect for foreign objects under the belt. |
| റിമോട്ട് കൺട്രോൾ പ്രതികരിക്കുന്നില്ല. | Low battery; remote not paired. | Replace remote control batteries. Refer to the remote control pairing instructions in the quick start guide if applicable. |
8 സ്പെസിഫിക്കേഷനുകൾ
Key technical specifications for the Sperax Walking Pad:
- മോഡൽ: ട്രെഡ്മിൽ
- മോട്ടോർ: 2.5 എച്ച്.പി
- വേഗത പരിധി: 0.6 - 3.8 മൈൽ / മണിക്കൂർ
- പരമാവധി ഭാരം ശേഷി: 320 പൗണ്ട് (ഏകദേശം 145 കിലോഗ്രാം)
- റണ്ണിംഗ് ബെൽറ്റ് ഏരിയ: 16.54" x 41.34" (approx. 42 cm x 105 cm)
- ഉൽപ്പന്ന അളവുകൾ: 115 x 50 x 12 സെ.മീ (ഏകദേശം 45.28 x 19.69 x 4.72 ഇഞ്ച്)
- ഇനത്തിൻ്റെ ഭാരം: 19 കി.ഗ്രാം (ഏകദേശം. 41.89 പൗണ്ട്)
- മെറ്റീരിയൽ: അലോയ് സ്റ്റീൽ
- ഡിസ്പ്ലേ തരം: എൽഇഡി
- പ്രത്യേക സവിശേഷതകൾ: Portable, Compact Design, Quiet Operation

Image: Key specifications highlighting the motor power and weight capacity.
9. സംഭരണം
The Sperax Walking Pad is designed for easy storage due to its compact and portable nature.

Image: Easy to move and store, showing compact dimensions and storage options.
- ഗതാഗത ചക്രങ്ങൾ: The treadmill is equipped with transport wheels for easy relocation. Tilt the unit and roll it to your desired storage location.
- കോംപാക്റ്റ് ഡിസൈൻ: അതിൻ്റെ സ്ലിം പ്രോfile allows it to be stored upright against a wall, under a bed, or under a sofa, saving space.
- പരിസ്ഥിതി: Store in a dry, cool place, away from direct sunlight and extreme temperatures.
10. വാറൻ്റിയും പിന്തുണയും
For warranty information and customer support, please refer to the contact details provided with your purchase documentation or visit the official Sperax webവാറന്റി ക്ലെയിമുകൾക്കുള്ള വാങ്ങലിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.
നിർമ്മാതാവ്: സ്പെരാക്സ്
ആദ്യം ലഭ്യമായ തീയതി: നവംബർ 3, 2023





